Need Help?
Call or text
Show parts
Usually ships within 4 - 14 days
This replacement part is a screw. It is a genuine replacement part made by Husqvarna. Normally screws are found in many different types of appliances. These parts are important in holding different pieces together so that the user is able to operate the machine effectively. A new screw might be needed if some parts of the appliance are loose or missing from place.Screws can become stripped over time with normal equipment use. If this is the case it is recommended that they be replaced. The repair for this screw is simple and will most likely require common household tools as well as pliers. This screw is made of durable metal made for long-lasting use. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit. This part is also a genuine OEM replacement part.
This part is a screw. This is a genuine Husqvarna replacement screw and has been sourced directly from the manufacturer. This replacement part is intended to replace missing or broken screws in a number of different small outdoor power equipment models.With regular usage, screws can easily become stripped, rusted, or lost. This can lead to improper functionality of outdoor power equipment. It's important to use genuine manufacturer replacement screws to ensure the highest-quality materials and a proper fit that will keep equipment in good working order. When installing screws, always follow proper guidelines and abide by appropriate safety measures. Husqvarna screws are manufactured from high-quality, durable material. This replacement part is a high-quality piece of standard hardware with many different applications. For proper installation and usage guidance, it is recommended to refer to the equipment manufacturer diagram.This replacement screw is designed to fit various models of Husqvarna, Craftsman, Poulan, and Weed Eater trimmers and hedge trimmers, blowers, and chainsaws. Please note this screw is a genuine OEM part and is sold individually.
This part is a replacement recoil starter pulley. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken recoil starter pulley in leaf blowers.The recoil starter assembly is essential for starting up the engine as it spins the flywheel in order to get the engine to power on. If this part is faulty, the engine may have trouble starting or may not start at all. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular recoil starter pulley, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality materials. This recoil starter pulley can be used with a variety of leaf blower models manufactured by Husqvarna, Poulan, and other brands.
This replacement starter spring is a genuine OEM model from Husqvarna. The starter spring, also sometimes called the recoil spring or recoil starter spring, is part of the entire starter assembly. It attaches to the fan and flywheel housing and is responsible for helping to retract the starter rope when it is pulled to engage the engine. Over time, the spring can wear out or become twisted. This can cause the starter rope to no longer retract or it can even seize up the entire starter assembly. Replacement of the spring is the only option and this OEM part can provide an exact fit for select engines. This part is designed for use with blowers, edgers, trimmers, and pruners that feature Husqvarna engines and that are manufactured by brands like Weed Eater, Poulan, and Husqvarna themselves. The starter spring is made of durable metal and is sold individually. Always disengage the spark plug and allow the engine to cool completely before beginning and repair projects, and protect the hands by wearing gloves.
This black starter handle is used for a range of handheld lawn and garden tools. The handle is the part that connects to the starter rope. When the handle is pulled, the started rope will rotate the clutch assembly and start the engine. Although the handle is simple, it is an essential part of the machine and helps to make starting it possible.The handle is made from plastic. It can become damaged and cracked over time and from repeated use, necessitating replacement. If the starter handle is broken, it will be difficult and in some cases impossible to start the machine. Even small cracks in the handle mean it should be replaced. A damaged starter handle could also be dangerous if it breaks while trying to start the machine.The starter handle will work with certain models of trimmers, pruners, and blowers from Husqvarna, Weed Eater, and Poulan. This OEM replacement starter handle is sourced from the manufacturer and is sold individually.
This starter rope tube is a genuine Husqvarna part, sold individually. This starter rope tube can be used as a replacement part in a leaf blower. This part houses the starter rope.The starter rope tube might eventually have to be replaced if it cannot hold the pull rope due to damage to the material of the tube. If the starter rope tube is punctured, dented, warped, or eroded to the point that the rope cannot pass through the tube or that a portion of the tube is exposed, the starter rope tube should be removed and replaced by this genuine OEM replacement part.This OEM part is a genuine replacement that is sold individually and sourced directly from the manufacturer. This starter rope tube is compatible with the following outdoor appliance brands: Husqvarna, Weed Eater, Craftsman, Poulan, and Poulan Pro.
This part is discontinued by the manufacturer and is no longer available for purchase.
This is a momentary switch kit is special switch that is used to turn the handheld leaf blower off and on. It's made of durable plastic that houses a switch with two tabs on the sides. Through time and use, the momentary switch kit can start to malfunction due to damage or wear and tear. When this happens, the momentary switch kit will need to be replaced. A broken switch kit will not allow a user to turn on and off the leaf blower.Replacing the momentary switch kit doesn't require the use of tools. A set of work gloves can be useful for the process. Make sure the engine is shut off, and the spark plug wire has been disconnected. Take off any covers needed to access the momentary switch. Remove the switch from the wires and install the new part.This is an authentic replacement part that is directly sourced from the manufacturer. It is sold as an individual component. The momentary switch kit is designed for use with leaf blowers manufactured by Craftsman, Weed Eater, Poulan, and Poulan Pro.
This replacement part is a cruise control kit and is intended for use in a variety of lawn equipment. This is a genuine replacement part made by Husqvarna. This cruise control kit is typically found in leaf or snow blowers. This part allows the user to continuously use the blowing mechanism without having to hold down the throttle for long periods of time. A new cruise control kit might be needed if the current one is not working in conjunction with the blower engine. This can be due to normal wear and tear or if the cruise control mechanism is not connected properly. Be sure the equipment is completely powered down and cooled off before attempting to repair an appliance. For more detailed instructions on how to install this specific part, see the owner's manual. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of lawn equipment made by Husqvarna.
This replacement part is a screw. This part is a genuine replacement part made by Husqvarna. Screws are small but important in many different types of machinery. Screws are able to hold different parts in place and help them stay secure during use so that the machine can operate smoothly and efficiently. A new screw might be needed if the current one is missing or damaged in any way. It is possible that the screw can become stripped over time and therefore not stay in place properly. If this is the case it is recommended that it be replaced. This repair should be fairly easy and only require a screwdriver and possible pliers. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use. Note that This is a genuine OEM replacement part.
This vacuum door spring is a genuine Husqvarna part, sold individually. This vacuum door spring can be used as a replacement part in a leaf blower. The purpose of the vacuum door spring in a leaf blower is to allow the opening and shutting of the vacuum door so that the door does not swing open of its own volition and remains shut while the appliance is in use.The vacuum door spring in a leaf blower might have to be replaced if it shows signs of damage that renders the spring incapable of producing its typical function during the standard use of the appliance. If the vacuum door does not remain shut due to damage, it should be removed and replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This vacuum door spring is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Poulan, and Poulan Pro.
This is a screw used with many kinds of lawn and garden equipment, such as leaf blowers and string trimmers. The screw can be used to attach components together on its own or with the use of a nut. When using a nut with the screw, it should have the same threading and finish as the screw. Wear and tear or breakage can happen with screws over time and will lead to the need to replace them.Corrosion, hot temperature, and stress may all create weakness in a screw. This can cause it to become brittle, loose, or even broken outright. A visual inspection of the screw will give an indication of whether it needs to be replaced with a new one. If a replacement is required, a screwdriver can be used to remove the screw before placing a new one in the same location.This screw can be used with string trimmers, leaf blowers, edgers, hedge trimmers, chainsaws, and pole pruners manufactured by Paramount, Poulan, Poulan Pro, Weed Eater, Husqvarna, and Craftsman. It is sold as an individual part. The screw is a genuine OEM replacement part sourced directly from the manufacturer.
This is a leaf blower fan blade, also called an impeller. This is what creates the flow of air out of the machine that blows leaves, grass clippings, and other debris out of the way. Without this part, the leaf blower would be unable to move air at all. The leaf blower fan blade is subject to some wear and tear through normal use. It is also made of plastic and may degrade over time, eventually cracking. If the leaf blower is not moving air and the engine is running normally, this could be the problem. Replacing the leaf blower fan blade will require opening the blower motor housing. Locate the fan blade, remove the Torx screws, and then remove the old impeller. Install the new one, replace the screws, and then reassemble the housing. This replacement fan blade is made from plastic with a metal sheath/insert. Note that this is an OEM part, and it is sold individually. It fits over 44 different Craftsman and Husqvarna gas-powered leaf blowers.
This is a genuine OEM lawn and garden equipment screw that is used in various types of machines. It is a tapping screw that may have several applications depending on the exact equipment in question. A hex key screw is responsible for providing a secure hold for various components. It is made of durable metal, but also exposed to high heat and constant vibrations which can lead to wear, damage, or even breaking. The screw should always be replaced with an OEM replacement. This genuine OEM tapping screw is manufactured by Poulan. It is designed to be used in select outdoor power equipment units from the brand. It can also be used in compatible models from Paramount, Weed Eater, Jonsered, and Husqvarna. It fits trimmers, chain saws, and hedge trimmers from these brands. The tapping screw is sold individually and does not include any additional hardware or parts. A Torx screwdriver or hex key will be required to replace this tapping screw. Be sure to wear gloves when performing engine repairs and allow the machine to cool completely before starting work.
The Fuel Pick Up Assembly is an OEM part for Husqvarna outdoor power equipment, including chainsaws, trimmers, and blowers. This assembly is responsible for drawing fuel from the tank to the carburetor, ensuring the engine receives a steady supply of fuel for optimal performance.
Over time, the fuel pick up assembly can become clogged or damaged due to debris in the fuel, exposure to ethanol-blended gasoline, or regular wear and tear. If the fuel pick up assembly is compromised, it can lead to poor engine performance or difficulty starting the equipment.
Symptoms of a bad fuel pick up assembly include:
This OEM Husqvarna part ensures proper fuel delivery and compatibility with your outdoor power equipment.
This is an OEM replacement screw that is specifically designed to secure the fuel tank on select lawn and garden equipment. The fuel tank retainer screw is made of durable metal and will be screwed to the fuel tank and the body of the machine, holding the tank in place and preventing it from being exposed to excessive vibrations or potential spillage. These screws can become worn over time or be lost in the process of other repairs. This genuine OEM fuel tank retainer screw is compatible with hundreds of trimmers, blowers, edgers, and pruners. It can be used with select models of machines from Poulan, Husqvarna, Weed Eater, and Jonsered. Owners should check their parts diagram for exact placement and part number compatibility as fuel tank retainer screws come in different lengths and diameters, so they are model-specific. This screw is made of durable metal and will require a Torx driver to install. The fuel tank retainer screw includes a built-in washer and is sold as an individual unit. Those who need more than one will have to purchase multiple quantities.