Dishwasher Flapper Spring Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W11174981
Replacement spring for dishwasher rack adjustment mechanisms. Restores proper tension when original is broken, fatigued, or missing. Essential part.
More
$27.37
- Compare At:
-
$32.57
- You Save:
-
$5.20
Genuine Whirlpool part
By: Whirlpool
Part Number: W10322576
Converting your portable dishwasher to built-in? This conversion kit includes all mounting hardware and adapters needed for permanent installation.
More
$101.95
- Compare At:
-
$121.32
- You Save:
-
$19.37
Genuine Ge part
By: Ge
Part Number: WD3X721
This spring kit restores proper door tension so the appliance door opens and closes smoothly and stays in position. Use it to replace worn or broken springs that cause a sagging, loose, or hard-to-operate door. What it does:
- Replaces worn or damaged door tension springs to restore smooth opening and closing.
- Helps prevent the door from dropping, sagging, or not staying open.
- Reduces uneven or jerky door movement caused by lost spring tension.
- Matches OEM-design function for safe, reliable door operation when installed correctly.
What's included: One spring kit. Install notes:
- Disconnect power (and water, if applicable) before beginning any repair.
- Springs are under tension—use caution and proper tools to avoid injury.
- Follow the appliance's service manual or OEM instructions.
More
$57.95
- Compare At:
-
$68.96
- You Save:
-
$11.01
Genuine Samsung part
By: Samsung
Part Number: DD82-01588A
Not getting water in your dishwasher or water keeps running? The water inlet valve controls flow and prevents leaks. Common DIY repair fix.
More
$161.95
- Compare At:
-
$192.72
- You Save:
-
$30.77
Genuine Ge part
By: Ge
Part Number: WD12X22722
This fill funnel directs the incoming water into the dishwasher and helps contain the flow to prevent splashing and leaks. Replacing a cracked or worn funnel restores a proper, sealed water path during the fill. What it does:
- Channels incoming water into the dishwasher during the fill
- Helps seal the opening to reduce splashing and external leaks
- Common symptoms include water leaking during fill, moisture around the inlet area, or visible cracks/deformation of the funnel
What's included:
Install notes:
- Disconnect power and shut off the water supply before servicing
- Access the funnel at the water entry point for your model
- Remove the old funnel; seat the new funnel evenly and ensure the seal is fully seated
- Reassemble and run a quick fill to check for leaks
Do-It-Yourself Stories from Customers like You
Gasket was leaking John E. • Gonzales , LA • July 13, 2020
Replaced gasket and fill funnel.
Read more
More
$14.95
- Compare At:
-
$17.64
- You Save:
-
$2.69
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8268913
If your dishwasher shuts off mid-cycle or leaks water, a warped or stuck overfill float may be the cause. This 5-minute fix restores proper fill control.
Do-It-Yourself Stories from Customers like You
The display buttons kept flashing and the dishwasher would shut off Lynn P. • Pooler , GA • June 28, 2016
Replace the motherboard and used YouTube to replace float switch. Part ordered was exactly what I needed
Read more
More
$61.56
- Compare At:
-
$72.64
- You Save:
-
$11.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 154237401
Tension spring that mounts on the side of your dishwasher to control door movement. Replace if broken, worn, or missing to restore smooth operation.
Do-It-Yourself Stories from Customers like You
Broken spring on door Jerry M. • Wilmore , KY • October 18, 2016
Replaced the spring.
Read more
More
$53.95
- Compare At:
-
$64.20
- You Save:
-
$10.25
Genuine Bosch part
By: Bosch
Part Number: 00173696
Restores proper door balance on your dishwasher. Replaces a worn, broken, or missing door hinge spring that causes sagging or doors that won't stay open.
More
$10.81
- Compare At:
-
$11.89
- You Save:
-
$1.08
Genuine Lg part
By: Lg
Part Number: 4975DD1001A
This is a water inlet guide assembly that directs incoming water into the dishwasher tub during the fill cycle. It channels water from the inlet valve to the proper location inside the wash chamber for effective cleaning. Replace this part if you notice water leaking around the inlet area, poor fill performance, or visible cracks and damage to the guide.
Do-It-Yourself Stories from Customers like You
Drain hose had a crack and the guide assembly looked bad Mike L. • Oxford , FL • March 07, 2018
I replaced both items. And it was easier than I thought.
Read more
More
$128.67
- Compare At:
-
$151.83
- You Save:
-
$23.16
Genuine Ge part
By: Ge
Part Number: WD12X445
Fix dishwasher overfilling or not filling properly with a new float dome. Protects the float sensor for accurate water level control. Easy 15-minute repair.
Do-It-Yourself Stories from Customers like You
1 not draining properly 2 not cleaning properly 3 not filling properly 4 not running properly 5 sump and sump cap was filthy 6 James W. • San Diego , CA • March 19, 2017
1. Replaced the Dishwasher motor and pump assembly. 2. Replaced the lower arm sprayer. 3. Replaced the Sump and filter. Replaced both the inlet and outlet hoses. 4. Replaced the Airgap. 5. Replaced Float Dome. 6. Replaced Water Inlet Valve.
Parts $220 for Dishwasher
Estimated Labor $400.00
Labor $0.00
Parts $100.00 for Pullout Faucet
Estimated Labor $175.00
Labor $0.00
Read more
More
$15.52
- Compare At:
-
$18.31
- You Save:
-
$2.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8519552
Fix dishwasher overflows or won't fill issues. This water level float detects proper fill levels. Replaces broken or stuck floats causing drainage problems.
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Bosch part
By: Bosch
Part Number: 00092188
Dishwasher not filling with water or soap not dissolving? The water inlet valve controls water flow into your dishwasher. Takes about 1 hour to replace.
This part fixes the following symptoms
-
overflowing
-
Will not fill with water
See more...
Do-It-Yourself Stories from Customers like You
Dishwasher would not clean dishes soap compartment would open but soap still in compartment Rodney K. • Honolulu , HI • October 02, 2014
The indications made me think the dishwasher was not shooting water. I checked the water valve with a voltmeter and it was getting power to open. I disconnected the line to make sure the water line was not plugged. Then I bypassed the door switch and ran the dishwasher with the door open and did not see the water filling which pointed to the inlet valve. I ordered the valve which came quickly. Replaced the valve and now the dishes are clean!
Read more
More
$234.42
- Compare At:
-
$278.96
- You Save:
-
$44.54
Genuine Bosch part
By: Bosch
Part Number: 00424099
The Impeller Jug is an OEM part for Bosch dishwashers. Located inside the wash chamber, the impeller jug is responsible for evenly distributing water throughout the dish rack during the wash cycle. It features strategically placed holes and channels that work with the spray arms to direct water flow and ensure all dishes receive thorough coverage.
Symptoms of a bad impeller jug include:
- Incomplete cleaning even on short or heavy wash cycles
- Dirty dishes remaining at the end of the cycle
- A buildup of food or grime deposits inside the wash chamber
- Off-balanced or excessive noise levels during washing
Causes of failure can be mineral or scale buildup inhibiting water flow, cracked or damaged casing allowing leaks, or worn impeller fins no longer efficiently dispersing water. Over time, hard water deposits and normal use can degrade performance.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.
Do-It-Yourself Stories from Customers like You
Dishwasher was not cleaning Matthew F. • Severna Park , MD • February 05, 2021
1) Cleaned all sprayer arms. Many of the outlet holes were clogged with small debris (mostly small bits of food and a Jolly Rancher candy wrapper).
2) Removed circulation pump to clean impeller assembly. It was really clogged with stuff (more candy wrapper, shards of glass, a small metal screw). Luckily impeller fins were intact.
3) Re-assembled. Watch for some sharp edges when re-connecting sump well.
4) Performed three or so test wash cycles pulled out from under counter to make sure I had...
Read more
More
$33.34
- Compare At:
-
$39.34
- You Save:
-
$6.00
Genuine Frigidaire part
By: Frigidaire
Part Number: 154246402
This small check ball sits inside the dishwasher's drain pump or water inlet valve and acts as a one-way valve to prevent water from flowing backward through the system. It ensures water moves in the correct direction during wash and drain cycles. Replace this part if you notice water draining back into the tub after a cycle completes, the dishwasher isn't draining properly, or water is leaking from the pump area.
Do-It-Yourself Stories from Customers like You
Dishwasher needed a refresh Darron T. • Sherman , NY • April 17, 2017
I ordered new racks, volute and check ball, and new spray arms. Replacing the volute and check ball were the hardest things to do and they were fairly easy to change. The toughest part for me was finding my T15 torxdriver. After replacing these parts the washer operates much better with much higher pressure than what we were experiencing recently.
Read more
More
$59.36
- Compare At:
-
$70.64
- You Save:
-
$11.28
Genuine Frigidaire part
By: Frigidaire
Part Number: 807445903
Fix I10, I20, or I30 error codes and slow water filling with this dishwasher water inlet valve. Stops mid-cycle failures and prevents leaks. DIY install.
Do-It-Yourself Stories from Customers like You
Frigidaire gallery series I10 I20 & I30 error codes Daniel T. • Dryden , NY • October 27, 2018
After reviewing a few blogs it was clear that Frigidaire is knows there is a problem. One of the blogs recommended AppliancePartsPros.com for a new pressure sensor switch and a water inlet valve. Ordered the part and it was shipped that day, as promised. Pulled the dishwasher out (which was the hardest part of the repair). The pressure sensor switch is a changed out with a small flat blade screw driver to release two snap clips. The inlet valve is changed out with three screws and on hose...
Read more
More
$53.51
- Compare At:
-
$71.55
- You Save:
-
$18.04
Genuine Whirlpool part
By: Whirlpool
Part Number: WP4171000
Fix a dishwasher that won't fill or leaks water with a new inlet valve. Common repair for filling issues and water seepage. DIY-friendly replacement part.
Do-It-Yourself Stories from Customers like You
Dishwasher would not fill Kenneth M. • Clarkston , MI • November 14, 2015
Performed diagnostic continuity tests on fill valve and overflow switch as recommended. Fill valve continuity test failed. Ordered part Saturday, shipped the following Monday, in my hands by the following Wednesday, installed and operational by Thursday. Great service! Thanks.
Read more
More
$103.39
- Compare At:
-
$124.07
- You Save:
-
$20.68