Dryer Valve Gas Knobs Parts
Genuine Ge part
By: Ge
Part Number: WE4X693
The Main Coil is an OEM part for GE dryers. It is a crucial component of the gas valve assembly, responsible for opening the gas valve to allow gas flow to the burner, enabling the dryer to produce heat.
Causes of a bad main coil can include electrical faults such as short circuits or open circuits within the coil, wear and tear from prolonged use, or damage due to overheating. Over time, the coil's ability to control the gas flow can diminish, affecting the dryer's performance.
Symptoms of a bad main coil include:
- The dryer not heating up
- Intermittent heating during a drying cycle
- The dryer taking longer than usual to dry clothes
- A clicking sound without the ignition of the burner
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Gas dryer would run but no heat Roger M. • Fabius , NY • September 03, 2016
I checked out a few youtube videos on trouble shooting a gas dryer that would not heat, like this one https://www.youtube.com/watch?v=Q8j6fQM3P34. Eliminated all the sensors as possible problems, leaving only the coils or more advanced problems. Took the chance it was one of the coils. I ordered both, replaced them both, put the dryer back together and fortunately that was the problem and it lit up and is running as good as new.
Read more
More
$35.41
- Compare At:
-
$42.14
- You Save:
-
$6.73
Genuine Ge part
By: Ge
Part Number: WE01X23599
Control knob for washer and dryer settings selection. Mounts on control panel. Replace if broken, cracked, loose, or missing for proper operation.
Do-It-Yourself Stories from Customers like You
Knob broke. Renee H. • Durham , NC • December 20, 2019
Once the knob came I just put it on. It works well.
Read more
More
$30.95
- Compare At:
-
$36.83
- You Save:
-
$5.88
Genuine Ge part
By: Ge
Part Number: WE04X24719
Replacement start button for dryer control panel. Installs on front console. Needed when original button is cracked, broken, or won't depress properly.
Do-It-Yourself Stories from Customers like You
The start button broke. Doug S. • Tyrone , NM • January 13, 2024
The start button broke?!? I ordered another start button and it looked exactly like the one I had. I figured it would break as well, so I might as well try to fix the broken one.
I unplugged the power, removed the back of the dryer console, disconnected the start switch from the button and the dryer, depressed the 3 pop out tabs to remove the button from the dryer.
I put the switch back in place and reinstalled the back.
I clipped off the 3 projections that kept the button from being...
Read more
More
$29.61
- Compare At:
-
$35.53
- You Save:
-
$5.92
Genuine Whirlpool part
By: Whirlpool
Part Number: 49572A
The LP Conversion Kit is an OEM component for Whirlpool and KitchenAid gas dryers. It allows conversion from natural gas to liquid propane fuel operation. Over time in gas-powered dryers, improper gas/air mixture causes part wear like weakened burner components. This is risky if overlooked but converting to an alternative fuel safely remedies.
Causes relate to unavoidable deterioration from gas combustion stresses. Conversion using this kit prevents hazardous gas leaks or explosions.
Symptoms involve:
- Diminished or unsafe heat levels from burners
- Gas leaks which exacerbate safety risks over time
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Needed to convert gas dryer to propane Ken B. • Foresthill , CA • June 12, 2014
Ordered the parts from ApplianceParts Pros.com and saved the $100 service call. The fix was easy, complete instructions enclosed.
Read more
More
$33.70
- Compare At:
-
$40.10
- You Save:
-
$6.40
Genuine Lg part
By: Lg
Part Number: 383EEL3002R
Converting your dryer from natural gas to propane? This LP conversion kit includes the orifice and components needed. Moderate difficulty repair.
Do-It-Yourself Stories from Customers like You
Natural gas to lp conversion for new dryer David W. • Cottondale , FL • November 30, 2015
Ordered conversion kit from Appliance Parts Pros.com and installed it myself. Most difficult part of the repair, was the removal of the front casing of the dryer to access the location of venturi tube to be changed out. The instructions were helpful, but not specific enough for my dryer. Once the casing was off, the job was not too difficult - you will need a set of short screwdrivers to remove the burner flange and close the pressure adjustment screw, normal length screw drivers will come into...
Read more
More
$20.38
- Compare At:
-
$24.46
- You Save:
-
$4.08
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844410
The Selector Knob is an OEM part for Frigidaire appliances designed for use on various models of washers and dryers. This knob enables users to select different cycles and settings, providing essential control over the appliance's operations.
Symptoms of a failing selector knob include:
- The knob failing to engage or change settings
- Difficulty in turning or a lack of resistance
- Visual signs of wear such as cracks or breakage
Causes of selector knob deterioration typically involve continuous mechanical use, accidental impacts, or exposure to harsh environmental conditions that can weaken the plastic.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Dryer knob was broken Karen H. • League City , TX • July 01, 2014
Replaced old knob with new knob
Read more
More
$55.30
- Compare At:
-
$65.81
- You Save:
-
$10.51
Genuine Whirlpool part
By: Whirlpool
Part Number: W10756270
The Knob Kit is an OEM replacement part for Whirlpool washing machines and dryers. Including a set of premium knobs color-matched to the appliance controls, this kit restores complete interfaces whenever old or damaged buttons need replacing. The kit includes 1 timer knob and 3 control knobs.
Causes for replacement involve normal wear from repeated touching during cycles as well as impact damage from falls or button presses gone awry over many years of service.
Symptoms necessitating a new knob kit include:
- Cracked, broken or missing buttons impeding normal operations
- Loosened knobs slipping out of holes or wearing partial turns
- Discolored faded markings obscuring switch positions
This OEM Whirlpool part is also compatible with Maytag, Amana, and other major brands.
Do-It-Yourself Stories from Customers like You
The timer knob stripped. Karen W. • Omaha , AR • January 24, 2022
After searching and watching videos, I determined that the only way to fix my dryer was to replace the entire timer. I also needed a new knob for the timer. Unfortunately, you can not purchase just 1 knob, you have to purchase a package that contains 1 of each of the knobs on the panel.
The repair was very easy! There was a video on the AppliancePartsPros website that showed exactly how to make the repair. You do not have to be an expert to make this repair.
Read more
More
$53.21
- Compare At:
-
$62.79
- You Save:
-
$9.58
Genuine Ge part
By: Ge
Part Number: WH01X10060
The Selector Knob is an OEM part for GE washing machines. This knob is used to choose different wash cycles and settings on the control panel, allowing users to customize their laundry preferences. It is designed to fit securely onto the control shaft and provide smooth operation for selecting various options.
Over time, selector knobs can wear out or become damaged due to frequent use or accidental impacts. Causes of a bad selector knob can include cracked or broken plastic, stripped or worn-out internal components, or a loose fit on the control shaft.
Symptoms of a bad selector knob include:
- Difficulty in turning the knob or selecting settings
- Knob spinning freely without changing settings
- Knob falling off or feeling loose
- Visible cracks or damage on the knob
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken selector knob Philip O. • Gastonia , NC • June 01, 2014
I ordered a new knob and it arrived very quickly. The repair was simple and I will use appliance parts pros again should I need to. Thank you.
Read more
More
$21.95
- Compare At:
-
$25.90
- You Save:
-
$3.95
Genuine Ge part
By: Ge
Part Number: WE1X1263
Dryer timer knob control for selecting drying cycles. Replace if your original knob is cracked, broken, stripped, or missing from the control panel.
Do-It-Yourself Stories from Customers like You
Squeaky squealing ge dryer Mitchel E. • Hackensack , NJ • January 12, 2016
Amazing story of speed & quality! Ordered on Friday 4pm, had parts in hand on 2pm on Sat, finished repair by 4pm ... 24hrs! The repair video was 100% on target. Replaced the rear drum bearing, front slides/glides, and the belt (cheap insurance!). All parts were exactly as described on APP.com. I (and my wife) couldn't be happier with the repair, and the exceptional service of APP! Do not be timid about trying this repair yourself. Take your time and watch the video. Priceless!
Recommend...
Read more
More
$19.70
- Compare At:
-
$27.08
- You Save:
-
$7.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10328463
Dryer won't heat or flame shuts off after seconds? Gas valve coils control gas flow to the burner. Common fix, typically completed in 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Flames not staying on Joe D. • Deerfield , IL • December 23, 2017
It took less then 15 min.
Read more
More
$64.70
- Compare At:
-
$77.64
- You Save:
-
$12.94
Genuine Samsung part
By: Samsung
Part Number: DC97-16931B
The Dryer Knob Encoder Assembly is an essential component for Samsung dryers, ensuring precise control of your appliance's settings. This genuine OEM part guarantees a perfect fit and reliable performance, allowing you to easily adjust drying cycles and temperatures with confidence. Crafted for durability, the Dryer Knob Encoder Assembly enhances the functionality of your dryer by accurately translating knob movements into electronic signals, resulting in consistent and efficient drying results. Installation is straightforward, making it a convenient solution for restoring your dryer's performance without the need for professional assistance. Whether your original encoder is worn out, unresponsive, or damaged, this Dryer Knob Encoder Assembly provides a seamless replacement that maintains the quality and efficiency of your Samsung dryer. Improve your drying experience with this dependable part, designed to keep your appliance running smoothly and extend its lifespan.
Do-It-Yourself Stories from Customers like You
The washer set button knob broke. Philip R. • Shiloh , IL • July 31, 2022
Ordered a new knob and took out little bits of the old one. Took the new knob and pressed it over the stump and presto works like new.
Read more
More
$66.78
- Compare At:
-
$79.47
- You Save:
-
$12.69
Genuine Speed Queen part
By: Speed Queen
Part Number: 806597
The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.
Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time.
Symptoms of a bad knob assembly include:
- Knobs or buttons that do not select cycles properly
- Faulty digital displays for time and settings
- Erroneous buzzers or error messages
- Unresponsive or stuck control functions
This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
Do-It-Yourself Stories from Customers like You
Shaft broke off timer Mike B. • Owensboro , KY • August 10, 2025
New timer
Read more
More
$11.75
- Compare At:
-
$12.58
- You Save:
-
$0.83
Genuine Whirlpool part
By: Whirlpool
Part Number: W11581317
Moving to a propane home? Convert your natural gas dryer to LP with this orifice kit. Straightforward DIY process takes 1.5-2.5 hours with careful work.
Do-It-Yourself Stories from Customers like You
Natural gas to propane conversion Jeff D. • Rancho Cucamonga , CA • March 17, 2014
I'm not an appliance mechanic and have never worked on a dryer before, but I have worked as an instrument technician and lightly dabbled in HVAC repairs. We moved from natural gas to a new home with propane, so purchased this kit to make the conversion. In my mind I thought it would be fairly quick and easy, change a few fittings, etc, but realized upon reading the instructions that I needed to disassemble most of the dryer.
The work was straightforward but since this was my first time...
Read more
More
$58.43
- Compare At:
-
$69.53
- You Save:
-
$11.10
Genuine Whirlpool part
By: Whirlpool
Part Number: W11675852
The Washer/Dryer Control Knob is an OEM replacement part for Whirlpool washing machines and dryers. This multifunctional knob allows for effortless navigation through various cycles, temperature settings, and customization options.
Causes of a bad control knob can include wear from repetitive turning over time, cracks developing from impacts or excessive stress, or loosened mounting fasteners compromising secure placement.
Symptoms of a bad control knob include:
- Difficulty distinguishing settings and cycles
- The knob spinning freely or falling off entirely
- Illegible markings confusing control selections
- Inability to manually operate washer/dryer programs
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken timer shaft on maytag dryer Clovis A. • Owls Head , ME • October 07, 2024
Swithching the timer was easy enough once I used the knob to keep the timer in place. The dryer’s wiring diagram was helpful.
Read more
More
$37.95
- Compare At:
-
$45.16
- You Save:
-
$7.21
Genuine Ge part
By: Ge
Part Number: WH01X10088
Replace your washer's control panel button if it's cracked, broken, or missing. This snap-in component installs on the control panel face plate.
Do-It-Yourself Stories from Customers like You
The posh button was gone Steven B. • Ute , IA • April 17, 2015
All I had to do was remove 3, 1/4" screws from the back and take the front off. Two 5/16th screws hold the circuit board in place, remove them and press the button into the hole from the back. Replace the circuit board, slide the front back on and install the three 1/4" screws. Always unplug the washer first!
Read more
More
$20.41
- Compare At:
-
$24.49
- You Save:
-
$4.08
Genuine Ge part
By: Ge
Part Number: WE25X217
Converting your dryer from natural gas to propane? This LP conversion kit includes orifices and instructions. DIY-friendly in under an hour.
Do-It-Yourself Stories from Customers like You
The clothes dryer that i purchased needed to be converted from natural gas to liquid propane Richard P. • Antwerp , OH • March 03, 2015
I searched the internet and found the conversion kit to LP gas at Appliancepartspros.com. their price was the least expensive. The instructions were excellent in describing the removal of the nat. gas orifice and replacement with LP orifice.
The part was delivered 3 days after ordered by Fed Ex., a speedy delivery!
I finished installing my clothes dryer and it works fine. I have some experience with such equipment but recommend professional installation for reasons of safety!
Thank you, R.P.
Read more
More
$69.50
- Compare At:
-
$82.70
- You Save:
-
$13.20