Dryer Knob, Dial & Button

The Timer Knob is an OEM part for GE dryers. It is designed to provide the user with manual control over the timing settings of the dryer’s cycles. This knob is mounted directly on the timer shaft and allows for the selection of various drying times and settings, essential for optimizing the drying process according to the type of laundry being handled.

Symptoms of a bad Timer Knob include:

• The knob failing to engage properly with the timer mechanism, resulting in no change in settings when turned.
• Physical damage such as cracks or breakage that impedes its functionality.
• Difficulty in turning the knob, which may feel stuck or loose.

Causes of a bad timer knob can include normal wear and tear from frequent use, accidental impacts from handling, or material degradation due to environmental factors like heat and humidity.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer Knob is an OEM replacement part for GE dryers. This knob controls the timer dial, which allows users to select the desired drying time settings. 

Causes of a bad timer knob can include wear and tear over time, damage such as cracks or splits, or failure of the electronic components that control the rotation mechanism. 

Symptoms of a bad timer knob include:

• Difficulty turning or selecting time settings 
• Glitching or failure to stop at desired increments
• Loose, wobbly, or misaligned fit on the timer dial
• Cracked or broken knob 

This OEM GE replacement part is also compatible with models produced by Hotpoint, RCA, and some Kenmore models.

The Selector Knob is an OEM replacement part for GE washing machines. Located on the control panel, this knob allows you to select desired wash cycles like normal, delicate or heavy duty.

Causes of a faulty selector knob include wear and tear from repeated twisting motions over many years as well as potential impacts if dropped. Water exposure can also degrade the knob material over time.  

Symptoms of a damaged selector knob include:

• Difficulty rotating the knob or getting it to "catch" cycle positions
• Washer not initiating cycles properly based on knob setting
• Loose knob that wobbles excessively or falls off control panel
• Cracking, flaking or discoloration on the exterior knob surface

This genuine GE knob is compatible with select Hotpoint and RCA washers.

The Control Knob is an OEM replacement part for GE washing machines. This component allows you to select and control the various cycles, settings, and functions of your washer.

Symptoms that may indicate the need to replace the control knob include:

• The knob becoming loose, difficult to turn, or falling off entirely
• Cracks, damage, or excessive wear to the knob itself
• Inability to properly select or change wash cycles and settings

Causes of a faulty control knob can include physical impact or mishandling, general wear and tear over extended use, or issues with the internal mechanisms that connect the knob to the washer controls.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore washer models. 

The Timer Knob Assembly is an OEM part for GE dryers that is responsible for controlling the dryer's timer, allowing users to select the desired cycle duration and start the dryer. Over time, the timer knob can become worn or damaged due to frequent use or accidental impact, leading to difficulties in setting the dryer timer or starting the machine. If you need the bisque colored version of this knob, you can order it here: WE1M483.

Common causes of a bad timer knob include cracking or breaking due to frequent use, the internal mechanism wearing out, or the knob becoming loose and no longer fitting securely on the timer shaft.

This part fixes the following symptoms-

• The knob slipping or failing to grip the timer shaft 
• Cracks or breaks in the knob 
• The knob coming off the timer shaft completely 

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Control Knob and Clip is an OEM part for GE washing machines and dryers. It attaches directly to the control shaft and is used to set the machine's cycles and settings. This knob allows for easy adjustment of washing or drying operations, making it a user-friendly interface for managing the appliance's functions.

Symptoms of a bad Control Knob and Clip include:

• The knob failing to engage the control shaft, resulting in no response when turned.
• Cracks or breaks in the knob, making it difficult to grasp or turn.
• The knob slipping or spinning freely without changing settings, indicating that the clip may be worn or broken.

Causes of a bad control knob and clip can include physical damage from excessive force, wear and tear from frequent use, or degradation of the materials due to age or environmental factors.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Knob with Clip is an OEM part for GE washing machines and dryers. This knob allows users to select and control various settings and cycles on their appliance with ease.

Causes of a bad Control Knob with Clip can include constant use leading to wear and tear, accidental impacts that may crack or break the knob, or exposure to harsh cleaning agents that can cause the knob's material to degrade over time.

Symptoms of a bad Control Knob with Clip include:

• The knob failing to engage with the control panel, making it impossible to select settings.
• Cracks or breaks in the knob that prevent it from being turned.
• The knob becoming loose or falling off due to a broken clip.
• Difficulty in accurately selecting cycles due to wear on the knob's indicators.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Timer Knob is an OEM part for GE dryers. Located on the control panel, this knob allows you to set desired drying times and select additional functions like air fluff or wrinkle release cycles.  It measures 2-3/4" in diameter and has a  1/8" extended shaft.

Causes of a faulty timer knob include wear from repeated grasping and twisting actions over years of use. Exposure to high dryer temperatures can also degrade the knob material over time.

Symptoms of a damaged timer knob include:

• Difficulty rotating the knob smoothly to desired time settings
• Dryer not initiating cycles properly based on knob position
• Loose wobbling knob that could potentially fall off 
• Cracking, chipping or discoloration on the knob exterior

This genuine replacement part is compatible with select Hotpoint and RCA models as well 

The Dryer Control Knob is an OEM part for GE dryers. It's a part that allows users to select the desired settings and cycles for their drying needs. This knob is directly connected to the dryer's control panel, translating the user's input into action by the machine. 

Causes of a bad dryer control knob can range from simple wear and tear from regular use, to physical damage from an impact or excessive force. 

Symptoms of a bad dryer control knob include:

• Difficulty in turning the knob
• The knob not engaging with the control panel, leading to no response when turned
• Visual signs of damage or wear, such as cracks or fading
• The knob coming off completely when pulled or turned

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Knob is an OEM part for GE dryers. It attaches to the front panel and allows users to set and control various dryer functions such as temperature, timing, and drying modes. This knob provides a simple interface for user interaction, ensuring ease of use and accessibility.

Symptoms of a bad Control Knob include:

• The knob slipping or failing to engage with the appliance’s settings,
• Difficulty in turning or adjusting the settings,
• The knob breaking or coming off completely.

Causes of control knob failure typically include physical damage from impacts, degradation from overuse, or environmental factors that can weaken the plastic, such as excessive heat or humidity.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer Knob Skirt is an OEM part for Whirlpool dryers. It serves as the decorative and functional ring around the timer knob, providing a clear and easy-to-read display for selecting drying cycles and settings. The skirt ensures that the timer knob remains securely in place and enhances the overall appearance of the dryer control panel.

Over time, the timer knob skirt can become damaged or worn out due to regular use, accidental impacts, or exposure to harsh cleaning agents. When the skirt is compromised, it may affect the functionality and aesthetics of the dryer controls.

Symptoms of a bad timer knob skirt include:

• Difficulty in turning the timer knob
• The timer knob becoming loose or falling off
• Inaccurate or unclear cycle selection markings
• Cracks, breaks, or discoloration of the skirt

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer Knob Assembly is an OEM replacement part for GE dryers. It serves as the primary control interface for setting and adjusting the timer function, allowing users to select the desired drying cycle duration.

Symptoms of a bad dryer timer knob assembly include:

• Difficulty in rotating or turning the knob smoothly
• Knob feeling loose or detached from the control panel
• Dryer not responding or failing to start/stop the cycle accurately
• Inaccurate time display or erratic timer behavior during the drying cycle

Causes of a bad timer knob assembly can include mechanical wear and tear over extended use, physical damage or impact to the knob or control panel, or electrical malfunctions within the associated electronic components that control the timer.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dryer models.

The Knob Spring Clip is an OEM part for Whirlpool appliances, specifically designed for use in washers and dryers. This small but essential component is responsible for securing the control knob to the control panel, ensuring that the knob stays firmly in place during operation.

Common causes of a bad spring clip include frequent use, accidental impacts, or wear and tear over time. A faulty spring clip can result in the control knob becoming loose or falling off, making it difficult to operate the appliance.

Symptoms of a bad knob spring clip include:

• The control knob is loose or wobbly
• The control knob falls off easily
• Difficulty in turning or setting the control knob
• The appliance not responding correctly to knob adjustments

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Selector Knob is an OEM part for Frigidaire appliances designed for use on various models of washers and dryers. This knob enables users to select different cycles and settings, providing essential control over the appliance's operations.

Symptoms of a failing selector knob include:

• The knob failing to engage or change settings
• Difficulty in turning or a lack of resistance
• Visual signs of wear such as cracks or breakage

Causes of selector knob deterioration typically involve continuous mechanical use, accidental impacts, or exposure to harsh environmental conditions that can weaken the plastic.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Knob is an OEM replacement part for GE washers and dryers. It is a crucial component that allows users to select and control various settings.

Symptoms of a faulty knob include:

• Difficulty turning or selecting desired settings
• The knob feeling loose or wobbly
• The knob falling off or becoming detached from the control panel

Causes of a bad knob can include normal wear and tear over time, physical damage from impact or mishandling, or issues with the internal mechanism or hardware that secures the knob in place.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Start Button is an OEM replacement part for GE dryers. It is the push interface that allows users to initiate wash cycles.

Causes of failure relate to cracks forming from chronic pressing, mineral buildup obstructing contacts, or loosened wires detaching connections over time.

Symptoms involve:

• Inability to activate the drying function regardless of settings
• Display lights functioning but drum failing to rotate
• Door remaining locked requiring manual override

This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore model dryers.