Dryer Panel Control Knobs Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 134011703
Color: white. It measures about 3 inches in diameter.
Do-It-Yourself Stories from Customers like You
Broken dryer knob Randy D. • Greenfield , TN • December 16, 2018
Replaced the broken knob with a new one.
Read more
More
$51.46
- Compare At:
-
$61.24
- You Save:
-
$9.78
Genuine Ge part
By: Ge
Part Number: WH01X10748
Replace your washer's broken, cracked, or missing control knob with this rubberized grip selector dial. Installs on the control panel for secure turning.
Do-It-Yourself Stories from Customers like You
There were two problems with my front loading washer the first was a cover plate over a lint compartment. It was the cycle knob that was broken off Price C. • Westborough , MA • October 04, 2019
I ordered the parts via my cell phone. The parts were shipped overnight express. I had them shipped to my main residence in Massachusetts. I took them up 2 days later to my summer home in Maine. I put the plate on and 5 seconds, I put the new knob on and another five seconds. The entire repair took less than
Read more
More
$24.95
- Compare At:
-
$29.44
- You Save:
-
$4.49
Genuine Maytag part
By: Maytag
Part Number: W11708423
Replaces a worn, cracked, or missing control knob on your appliance's control panel. Restores secure grip and accurate pointer alignment for settings.
More
$34.95
- Compare At:
-
$41.59
- You Save:
-
$6.64
Genuine Ge part
By: Ge
Part Number: WE19M1492
Replaces cracked or broken dryer control console back cover. Forms rear housing that supports timer, controls, and shields wiring. Easy DIY fix.
Do-It-Yourself Stories from Customers like You
The started switch fell back into the back assembly faceplate i took it apart with just three screws to loosen and the problem was obvious the plastic tabs that held the switch had sheared off from George B. • North Port , FL • October 30, 2017
Ordered the faceplate and just for insurance a new switch and know. The installation required a phillips screwdriver, a needle nose pliers, and about 10 minutes of time. Thanks to AppliancePartsPros for getting me the right parts asap...........George
Read more
More
$198.95
- Compare At:
-
$234.76
- You Save:
-
$35.81
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8181881
Color: Blue. For gray order WP8181859.
Do-It-Yourself Stories from Customers like You
The control know on my duet washing machine was broken Kathi K. • Milton , DE • July 22, 2014
I purchased a replacement knob from AppliancePartsPros and replaced the broken knob. the ApplicanceParts website was terrific. I didn't need the washer model number to choose the proper knob because the illustration was perfect. After ordered, the knob arrived within a day. The time expended from ordering to repair was less than 15 minutes. Thanks so much.
Read more
More
$27.77
- Compare At:
-
$32.77
- You Save:
-
$5.00
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8182050
Front load washer control knob. Color: Pewter. For gray order WP8181859. For Biscuit order WP8182049. For blue order WP8181881.
Do-It-Yourself Stories from Customers like You
Lost a knob for my dryer while we were moving Leon M. • Rialto , CA • March 28, 2017
Called the number. Placed the order. And the part was received the next day.
Read more
More
$52.95
- Compare At:
-
$62.48
- You Save:
-
$9.53
Genuine Ge part
By: Ge
Part Number: WE19M1656
This control panel assembly replaces the white front console on your dryer. It restores a solid mounting surface for the timer, switches, or display so you can select cycles and settings with proper alignment and smooth operation. What it does
- Provides the front console housing for the dryer's user controls
- Keeps buttons/knobs and indicators aligned and protected
- Restores appearance after cracks, discoloration, or broken tabs
- Helpful when controls feel loose, are hard to press, or the console is rattling
What's included
- 1 white control panel assembly
Install notes
- Disconnect power; if gas, shut off the gas supply before servicing
- Remove control knobs and any end caps; take out mounting screws/clips and lift off the old panel
- Transfer any brackets, light pipes, clips, and harness retainers from the old panel to the new as needed
- Reinstall and tighten fasteners; refit knobs and verify smooth control operation before restoring power
Do-It-Yourself Stories from Customers like You
Front button had broken off Scott L. • Miramar , FL • March 13, 2015
Replacing the control panel assembly is extremely easy with one exception. To take off the existing panel (and there is no way to order a button for this, you have to order and replace the entire assembly), you pull the dial knob off (it comes right off, no tools required). There's a single screw underneath, Phillips head. You can then slide the panel up, and then unplug the cable connecting the circuit board to the dryer itself.
Next steps: Unscrew the half dozen or so screws to remove the...
Read more
More
$236.95
- Compare At:
-
$279.60
- You Save:
-
$42.65
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10562155
This replacement control knob restores smooth, reliable turning on your appliance's control panel so you can select settings accurately again. It's designed to slide onto the control shaft and provide a secure, easy-grip interface. What it does
- Attaches to the control shaft to let you select settings
- Replaces cracked, stripped, or missing knobs
- Helps ensure the switch or valve engages properly when turned
- Improves grip and appearance on the front panel
What's included
Install notes
- Disconnect power; if servicing a gas appliance, also shut off the gas supply
- Pull the old knob straight off the shaft—do not pry against the panel
- Align the new knob with the shaft flats/splines and press straight on without forcing
- Test operation to ensure the knob fully engages the control
Do-It-Yourself Stories from Customers like You
Deteriorated knob control (temperature) John N. • The Villages , FL • May 03, 2019
Replacement
Read more
More
$52.95
- Compare At:
-
$62.48
- You Save:
-
$9.53
Genuine Ge part
By: Ge
Part Number: WE4M353
Fix a dryer that won't advance cycles or turn on due to a worn timer shaft. This plastic-shaft timer restores knob grip and timing control. 10-minute DIY fix.
Do-It-Yourself Stories from Customers like You
Several parts timer belt doors with and element William F. • Gainesville , FL • August 09, 2015
Checked for the problem replaces that part along with some parts as preventive maint app made it easy parts for perfect and were shipped very fast app is the only place to buy parts great place
Read more
More
$126.48
- Compare At:
-
$151.78
- You Save:
-
$25.30
Genuine Whirlpool part
By: Whirlpool
Part Number: WP37001184
Restore clear, reliable control of your appliance's timer. This two-piece timer knob and dial replaces worn or broken controls so you can accurately set cycles and read the settings again.
- Turns the timer shaft to select and adjust cycles
- Dial provides readable cycle markings and protects the panel
- Helps resolve issues like a knob that spins freely, cracks, or won't stay on
- Addresses missing or unreadable dial markings that make settings hard to see
What's included: One timer knob and one dial. Install notes:
- Disconnect power before servicing
- Pull off the old knob; remove any retaining clip if present
- Release tabs to remove the old dial; align and snap the new dial into place
- Align the knob with the timer's D/flat shaft and press firmly until fully seated
Do-It-Yourself Stories from Customers like You
Broken timer knob worn out door switch Kurt H. • Quakertown , PA • January 01, 2016
The timer knob simply pulls off the shaft with a solid, steady pull. Cleaned the timer cavity of lint/dust buildup. Aligned the keying flat of the shaft and knob and pushed the new knob on with careful, steady pressure until it was obviously seated. No tools required other than a vacuum.
The door switch would sometimes not shut the dryer off when the door was opened. New switch came with new fast-on connectors. Replacement required opening the top cover of the dryer and hinging it up. This...
Read more
More
$54.95
- Compare At:
-
$65.94
- You Save:
-
$10.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 131062300
If your dryer won't shut off or cycles won't advance, the timer may have failed. This control manages drying cycles and run time. DIY repair in 20 minutes.
This part fixes the following symptoms
-
Doesn't shut off
-
Timer will not advance
See more...
Do-It-Yourself Stories from Customers like You
The timer had stopped advancing William S. • Arlington , TX • April 03, 2017
With a Phillips screw driver, on the back of the control panel there was about 6 or 7 screws to undo, to take the cover off and 2 screws holding the timer in place. Just undone those, took out old timer, made sure I took wires from old timer one at a time, and, put on new timer. Put everything back, although I had to find a couple of very small washers to make the timer fit tight, in the 2 holes it came out of. Luckily I had those or would of been a very loose timer. Very easy to do.
Read more
More
$184.72
- Compare At:
-
$217.97
- You Save:
-
$33.25
Genuine Whirlpool part
By: Whirlpool
Part Number: W10857611
Dryer won't start, advance through cycles, or shut off? A faulty timer is often the cause. This mechanical control selects and advances drying programs.
Do-It-Yourself Stories from Customers like You
The plastic shaft on the timer broke Allison G. • Venice , CA • December 20, 2025
But the new part and installed it. It was super easy.
Read more
More
$151.95
- Compare At:
-
$181.42
- You Save:
-
$29.47
Genuine Ge part
By: Ge
Part Number: WE19M1486
This replacement control panel, also called the backsplash assembly, is the structural console on the rear of the dryer top where the timer and switches mount. It restores secure control mounting and a clean, finished appearance when the original is cracked or damaged.
- Houses and supports the dryer's timer and control switches
- Covers and helps protect console-area wiring from contact
- Aligns control shafts through the panel openings for smooth knob operation
- Common signs of failure: cracked panel, broken mounting tabs, loose or rattling controls
What's included: 1 control panel Install notes:
- Disconnect power; for gas models, also shut off the gas supply
- Remove control knobs and mounting screws, then tilt or lift the console to access the panel
- Transfer timer/switches and any brackets from the old panel to the new one, keeping hardware organized
- Do not overtighten screws; verify all controls turn and click freely before restoring power
Do-It-Yourself Stories from Customers like You
Plastic console capture tabs and switch tabs broke plastic switch split Nelson T. • Mobile , AL • April 26, 2016
Unplugged the dryer. Disconnected the exhaust hose w/ 5/16" nut driver. Removed all knobs. Removed 3 Phillips head screws behind the console. Removed all switches and controls by lifting locking tabs and turning counter clockwise. Installed switches and controls into new console by inserting into hole(s) and turning clockwise until locking tab engaged. Positioned console capture tabs back in their slots and snapped console back in place with the back plate. Re installed the tree screws. Re...
Read more
More
$129.76
- Compare At:
-
$155.71
- You Save:
-
$25.95
Genuine Ge part
By: Ge
Part Number: WE4M359
If your dryer control knob slips or won't turn the timer properly, this plastic timer shaft restores secure engagement between knob and timer mechanism.
More
$78.95
- Compare At:
-
$94.74
- You Save:
-
$15.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3976577
Dryer won't shut off or advance through cycles? This timer restores proper cycle switching and automatic shut-off. Moderate DIY repair, 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Timer on dryer was malfunctioning dryer would not automatically turn off Patrick T. • Saugerties , NY • January 02, 2015
Replaced timer.
Read more
More
$171.38
- Compare At:
-
$205.66
- You Save:
-
$34.28
Genuine Whirlpool part
By: Whirlpool
Part Number: W10853910
This control knob attaches to the appliance's control shaft so you can select settings with a solid, positive feel. Replace a cracked, stripped, or missing knob to restore smooth operation and a clean, finished look.
- Attaches to a switch or valve shaft to select temperatures, burner levels, or cycles
- Transfers your hand turn to the control shaft for accurate setting changes
- Common symptoms: cracked hub, spins without engaging, wobbly/loose, falls off, or missing
- Helps maintain a uniform appearance across the control panel
What's included: 1 control knob Install notes:
- Disconnect power (and shut off gas, if applicable) before servicing
- Pull the old knob straight off the shaft; avoid prying against the control panel
- Align the insert with the shaft's flats or splines and press straight on until fully seated
- Match position- and finish-specific knobs to the original on models that use different knobs per location
Do-It-Yourself Stories from Customers like You
Knob on dryer had a lot of play in since purchased 6 months ago finally stopped working altogether Jil S. • Glen Allen , VA • November 19, 2023
Ordered a knob that was compatible. Worked great only it did not have a pointer telling you what setting you were on. This was solved by using a magic marker once we figured out where to put it.
Read more
More
$48.37
- Compare At:
-
$57.56
- You Save:
-
$9.19