Microwave Bath Fan Light Switch Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: 8009
Original Whirlpool light bulb, 40 watt.
Symptoms of needing to replace the light bulb include:
- Dimming or flickering light
- Complete lack of illumination inside the appliance
- Visible signs of damage or burnout on the bulb itself
Causes of a faulty light bulb can include normal burnout over time, electrical issues, or physical damage due to impact or vibrations.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Kenmore, Frigidaire, GE, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore appliances.
Do-It-Yourself Stories from Customers like You
Jennair jjw9630cas double oven doors did not close all the way and the light would not go out Wayne W. • East Longmeadow , MA • February 13, 2016
I have a Jennair jjw9630cas double wall oven, and after a few years I noticed that the light would not go out, first in the bottom oven, and then in the top oven. After doing some research I discovered this was not uncommon, and the fix usually involved replacing the hinges and/or the hinge receptacles. It didn't look like a difficult fix so I ordered four new hinges and four new receptacles, which arrived quickly. I found a video on YouTube that showed how to replace the hinges and it...
Read more
More
$19.55
- Compare At:
-
$23.26
- You Save:
-
$3.71
Genuine Whirlpool part
By: Whirlpool
Part Number: 8206232A
The 40W Light Bulb is an OEM replacement part for Whirlpool microwave ovens. It is a standard-size bulb designed to provide illumination inside the microwave cavity, allowing you to easily view and monitor the cooking or reheating process.
Symptoms of a faulty microwave light bulb include:
- Dimming or flickering light during operation
- Complete bulb failure or no illumination within the cavity
- Discoloration or physical damage to the bulb itself
Causes of a bad microwave light bulb can include normal wear and tear over time, electrical surges or voltage fluctuations, or physical impact or vibration during use.
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore microwave oven models.
Do-It-Yourself Stories from Customers like You
Several keys on the touchpad unexpectedly stopped working (ie start cancel setup vent fan light cook reheat soften/melt & defrost quick defrost) George W. S. • Kennesaw , GA • October 08, 2016
After extremely poor support from WhirlpooI and researching numerous U-Tube videos, I fully troubleshot potential failed components and connections. All appeared to function properly, so I reassembled the unit and experienced the same problem as before. I then narrowed down the problem to either the Touchpad ($57+$8 shipping) or the control board ($295+shipping). If those did not work, then a new Microwave of better quality, reliability and support than original microwave, Unfortunately,...
Read more
More
$8.56
- Compare At:
-
$10.19
- You Save:
-
$1.63
Genuine Ge part
By: Ge
Part Number: WB24X829
The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.
Symptoms of a failing Microwave Door Switch include:
- The microwave not starting or heating
- Running when the door is opened
- Unusual noises when the door is closed
Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
This part fixes the following symptoms
-
Doesn't shut off
-
No heat
-
Won't start
See more...
Do-It-Yourself Stories from Customers like You
Ge microwave ran when turned off if door was shut Jason A. • Cary , NC • April 02, 2017
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out...
Read more
More
$39.95
- Compare At:
-
$47.14
- You Save:
-
$7.19
Genuine Whirlpool part
By: Whirlpool
Part Number: W10727360
Fix a microwave that won't start, runs with door open, or requires slamming the door. This door switch is a common fix for intermittent operation issues.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$9.63
- Compare At:
-
$11.36
- You Save:
-
$1.73
Genuine Whirlpool part
By: Whirlpool
Part Number: W10269458
Microwave displays 'close door' message or won't start? The door interlock switch is likely failed. Moderate DIY repair—replace all 3 switches together.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$31.59
- Compare At:
-
$37.59
- You Save:
-
$6.00
Genuine Ge part
By: Ge
Part Number: WB24X10047
The Door Interlock Switch is an OEM part for GE microwaves. It ensures the safety of the microwave by preventing the appliance from operating while the door is open. This switch is part of a microwave's safety mechanism, which includes multiple interlock systems designed to stop the generation of microwaves immediately once the door is opened, thereby protecting users from exposure to microwave radiation.
Signs that it's time to replace your door interlock switch include the microwave not starting or stopping unexpectedly, the microwave continuing to operate with the door open, or a failure to heat food even though the appliance seems to be running.
Symptoms of a bad Door Interlock Switch include:
- Microwave does not start
- Microwave stops unexpectedly
- The microwave operates with the door open
- Microwave turns on but does not heat food
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$42.95
- Compare At:
-
$51.11
- You Save:
-
$8.16
Genuine Ge part
By: Ge
Part Number: WB24X830
This is a monitor or interlock switch that detects whether the microwave door is properly closed before allowing the unit to operate. It is a safety device that shuts off microwave power if the door is open or if other door switches malfunction. Replace this switch if the microwave does not start, runs with the door open, or blows a fuse when the door is closed.
Do-It-Yourself Stories from Customers like You
Ge microwave ran when turned off if door was shut Jason A. • Cary , NC • April 02, 2017
The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out...
Read more
More
$38.95
- Compare At:
-
$46.35
- You Save:
-
$7.40
Genuine Ge part
By: Ge
Part Number: WB02X35488
The Halogen Lamp is an OEM replacement part for GE microwaves. It provides optimal interior light for monitoring food as it cooks. Consistent illumination supports convenience and usability.
Causes generally involve standard wear of the lamp coil and filament from heat and electromagnetic forces during operation. Accidental damage is another potential issue.
Symptoms of a bad halogen lamp include:
- Dark or splotchy lighting inside the microwave
- Inability to fully view food as it cooks
- Difficulty determining if items are thoroughly heated
- Shadows create the potential for uneven cooking
This GE OEM replacement is compatible with some Hotpoint, RCA, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Microwave oven light Kenneth W. • Los Alamos , NM • May 03, 2014
The light inside the microwave oven was out. I could not see where it was and how to get at it because the inside is a continuous box. Went online to youtube for my oven model and sure enough a very well made demonstration of how to replace the light bulb was there. Found the part number from AppliancePartsPros.com, ordered, and in a few days the new bulb was there, and it was easy to replace.
Read more
More
$20.95
- Compare At:
-
$24.72
- You Save:
-
$3.77
Genuine Whirlpool part
By: Whirlpool
Part Number: W10269460
Microwave won't start or shows door error? A faulty door switch prevents operation when the door isn't detected as closed. DIY repair in under an hour.
Do-It-Yourself Stories from Customers like You
Light flickering when open door & stays on when door opened Jo B. • Vandalia , OH • March 01, 2020
After checking other reviews, we decided it was best to replace the interlocks, cam and all three switches. You're going to need a phillips screwdriver, star driver, small screwdriver and needle nose pliers. You need to remove the ONE Phillips screw above the control panel inside the vent. The contol panel is on hinges that you can slide up and towards you. Using caution remove the wires noting how they're connected. Pinch the top of the white connectors and wiggle them free. We couldn't get...
Read more
More
$32.64
- Compare At:
-
$38.52
- You Save:
-
$5.88
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509459
Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch ensures your microwave only runs when the door is closed.
Do-It-Yourself Stories from Customers like You
Sears Kenmore elite blowing main circuit breaker when trying to start Dennis S. • Bucyrus , OH • November 17, 2018
Check fan operation and was OK. Everything else worked except when microwave was started for a cycle. I looked around on internet and found someone had trouble with the door switches. I started to check door switches and found one shorted. I replaced both lower door switches and it took care of problem.
Read more
More
$25.76
- Compare At:
-
$30.91
- You Save:
-
$5.15
Genuine Whirlpool part
By: Whirlpool
Part Number: W10210871
Replace your microwave's light socket if the bulb won't illuminate or flickers. This socket powers the interior bulb for safe cooking visibility. Verify fit by model number before ordering.
Do-It-Yourself Stories from Customers like You
The exterior light bulb failed the bulb had broken away from the socket and was hanging by the wires David R. • Buxton , ME • October 27, 2017
In order to get the bulb screw base out of the socket I had to remove the bottom metal panel and remove the the bulb base. Once I removed the socket, I noticed that the one of the electrical solderless connectors was corroded and burned. I replaced the connector, socket, and bulb. Works great now.
Read more
More
$10.71
- Compare At:
-
$12.64
- You Save:
-
$1.93
Genuine Ge part
By: Ge
Part Number: WB24X25397
Fix a microwave that won't start or stops mid-cycle with this door interlock monitor switch. Ensures safe operation when door closes. DIY repair.
Do-It-Yourself Stories from Customers like You
When a power up of any kind was selected timer or clock ran down but turntable or cook mode never started when door was moved a little it would start to work then stop research suggested door switch James D. • Smyrna , TN • December 28, 2014
Removed and replaced 3 door switches and mounting bar that holds switches plastic gets brittle with age and each switch comes out slightly different from each other, the chances of breaking a mounting pin is very easy. care should be taken when snapping mounting bar back into place to insure top latch and bottom latch locate properly insure bar is proper aligned when tightening screws their is free play in mounting bracket that could affect door properly engaging switches. NOTE that their are...
Read more
More
$31.95
- Compare At:
-
$37.70
- You Save:
-
$5.75
Genuine Whirlpool part
By: Whirlpool
Part Number: W10709921
Illuminates the microwave cavity for easy food monitoring. Replace when bulb burns out or flickers. Verify fit with your model number before ordering.
Do-It-Yourself Stories from Customers like You
Bulbs burned out from using as night light Monika S. • Grants Pass , OR • October 04, 2016
Ordered from an appliance store and got wrong bulbs. They wanted to charge $15.00 each for the right ones. Your sight had then for $7.00.
Read more
More
$18.23
- Compare At:
-
$21.69
- You Save:
-
$3.46
Genuine Ge part
By: Ge
Part Number: WB25X10019
Replace your microwave's halogen light bulb when interior lighting dims or fails. Restores visibility for monitoring cooking. Verify fit with your model.
Do-It-Yourself Stories from Customers like You
Burnt out halogen light (2) Rodolphe B. • New Bern , NC • September 20, 2014
Removed light cover. oven was above range type and light assbly is at rear bottom of unit. access and visibility of bulb sockets a bit difficult, Usen hand hell mirror to assist .
Bulb extraction and insertion a snap.
Read more
More
$18.73
- Compare At:
-
$22.48
- You Save:
-
$3.75
Genuine Ge part
By: Ge
Part Number: WB36X10003
Illuminates your microwave interior for monitoring food during cooking. Replace when bulb burns out or dims. Verify fit with your model number before ordering.
Do-It-Yourself Stories from Customers like You
Light bulbs out in the hood of my spacesaver microwave Phyllis G. • Berwick , PA • October 03, 2014
Ordered two new bulbs and replaced them. The lights have two settings and only one bulb was working on the dimmest setting. The repair was easy. The new lights are so bright and arrived quickly. I will definitely order again.
Read more
More
$17.37
- Compare At:
-
$22.72
- You Save:
-
$5.35
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304509460
Microwave tripping breaker or won't start? A faulty door switch is often the cause. This safety switch detects door position. Moderate DIY repair.
Do-It-Yourself Stories from Customers like You
Sears Kenmore elite blowing main circuit breaker when trying to start Dennis S. • Bucyrus , OH • November 17, 2018
Check fan operation and was OK. Everything else worked except when microwave was started for a cycle. I looked around on internet and found someone had trouble with the door switches. I started to check door switches and found one shorted. I replaced both lower door switches and it took care of problem.
Read more
More
$54.25
- Compare At:
-
$64.56
- You Save:
-
$10.31