Washer Timer Control Knob Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001972
Replacement timer control knob for washers. Restores manual cycle selection when original knob is cracked, broken, stripped, or missing. Installs on front panel.
Do-It-Yourself Stories from Customers like You
The timer and on/off knobs broke Joseph C. • Wakefield , VA • January 31, 2015
First I used epoxy which I do not recommend since it can interfere with the later replacement of new knobs. The replacement of new knobs went easily with the exception of getting the epoxy off. Getting the epoxy off is difficult and required a Dremel to cut the plastic and slip joint pliers to peel the plastic off.
Read more
More
$52.68
- Compare At:
-
$62.69
- You Save:
-
$10.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8574964
Restore smooth, accurate control with this replacement control knob. It fits onto the selector or timer shaft so you can choose cycles, temperatures, or time and replace a cracked, stripped, loose, or missing knob.
- Attaches to the control shaft to operate a switch, timer, or thermostat
- Provides a secure grip for selecting cycle, temperature, speed, or time
- Resolves issues like free-spinning, slipping, or knobs that won't stay on
- Helps when settings can't be adjusted due to a damaged or missing knob
What's included: 1 control knob. Install notes:
- Disconnect power before servicing to prevent accidental start
- Pull the old knob straight off; avoid twisting the control shaft
- Align the new knob with the shaft and press firmly until fully seated
- If your original knob had a removable insert/retainer, transfer it to the new knob
Do-It-Yourself Stories from Customers like You
Broken selector knob Warren C. • Bay St Louis , MS • July 24, 2016
Easy to find parts needed. Had on machine three days later.
Read more
More
$43.95
- Compare At:
-
$52.30
- You Save:
-
$8.35
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10236098
This replacement control knob assembly restores a solid, accurate feel when selecting settings on your appliance. Replace cracked or stripped knobs to regain smooth control and a clean, like-new appearance.
- Interfaces with the control shaft so you can select functions and settings
- Common failure signs: cracked or broken knob, stripped insert, wobbly fit, falls off, hard to turn, or missing knob
- Restores proper grip and pointer alignment for accurate adjustments
- Direct replacement engineered to match the original fit and function
What's included: One control knob assembly. Install notes:
- Disconnect power and allow any hot surfaces to cool before servicing
- Pull the old knob straight off the control shaft; avoid prying on the control panel
- Align the shaft/keyed flat with the new knob and press firmly until fully seated
- Verify smooth operation through the full range of settings
Do-It-Yourself Stories from Customers like You
Broken knob on control panel. Andrew H. • Chicago , IL • September 04, 2022
I replaced the knob which was stripped. Easy enough to order the right knob. Then pop the old one out and replace it with the new one.
Read more
More
$48.46
- Compare At:
-
$57.67
- You Save:
-
$9.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 131761704
Rotary control knob that fits onto the control shaft to select settings. Replace if your original knob is cracked, broken, worn, or missing.
Do-It-Yourself Stories from Customers like You
Broken knob Fred S. • Los Gatos , CA • August 29, 2014
Found the correct part number, ordered a replacement and replaced it
Read more
More
$32.74
- Compare At:
-
$38.63
- You Save:
-
$5.89
Out Of Stock
Usually ships within 4 - 14 days
Genuine Lg part
By: Lg
Part Number: EBR78263905
This power control board is the appliance's main electronic PCB. It manages power distribution and control logic, coordinating sensors and user inputs so the unit's motors, fans, heaters, and valves run when they should. What it does:
- Distributes and regulates power to key components through onboard relays
- Processes sensor feedback and timing to execute programmed operations
- Coordinates operation of motors, fans, heaters, and valves as required
- Common failure symptoms: unit won't power on or start, unresponsive controls/display, intermittent or erratic operation, repeated clicking from the control area, or error codes
What's included:
- 1 electronic control board assembly
Install notes:
- Disconnect power before servicing; verify power is off
- Use ESD protection and handle the board by the edges
- Photograph/label connectors and transfer plugs one at a time, ensuring proper seating and orientation
- Secure the board, reassemble covers, restore power, and verify normal operation
Do-It-Yourself Stories from Customers like You
No power of functionality Steven H. • Orlando , FL • June 03, 2017
I researched the problem online and tried to troubleshoot it by unplugging the machine and holding the start button for five seconds. I plugged it back in and still no response, which indicated it was most likely a bad Main PCB. I order the part and with Appliance Parts Pros' superb standard shipping service I received it a day and a half later. I removed the cover on the bad Main PCB, snapped a quick photo of the wiring and then installed the new Main PCB. I plugged in the washer and it...
Read more
More
$350.48
- Compare At:
-
$413.57
- You Save:
-
$63.09
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8538957
This gray control knob replaces a worn or broken knob on the console so you can accurately select settings. It fits onto the timer/selector shaft and restores a secure grip with smooth, positive engagement. What it does:
- Attaches to the control/timer shaft on the front panel
- Lets you turn and select cycles or options
- Restores a snug fit when the original knob is cracked or stripped
- Common symptoms: knob spins freely, falls off, won't turn settings, or is missing
What's included:
Install notes:
- Disconnect power before servicing
- Pull the old knob straight off the shaft; retain any insert/clip used by your model
- Align the new knob with the shaft and press firmly until fully seated
- Test all settings for proper engagement
Do-It-Yourself Stories from Customers like You
Bad water level switch& control knob. Jimmy A G. • Port Lavaca , TX • March 13, 2017
Removed upper cowling swapped out switch.
Read more
More
$48.46
- Compare At:
-
$57.18
- You Save:
-
$8.72
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285952
Washer stuck between cycles or skipping rinse? This timer controls cycle sequence and duration. DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My washing machine was getting stuck between cycles Robert G. • Flatwoods , KY • October 26, 2014
I knew the timer was bad. I went to the parts train website as i had done before. I found the part in just a few moments. It arrived in 2 days and I replaced the timer. 4 screws and 10 minutes was all that it took.
Read more
More
$241.95
- Compare At:
-
$287.92
- You Save:
-
$45.97
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10254
Fix a washer that won't cycle, skips rinse, or drains while filling. This mechanical timer restores proper cycle sequencing. DIY repair in 20 minutes.
Do-It-Yourself Stories from Customers like You
Clothes washer not cycling properly sometimes drains while filling for rinse skipping rinse cycle Anthony S. • Bloomsbury , NJ • April 29, 2016
Ordered new control from Appliance Parts Pros and installed it using online repair tutorial. Instructions not exact but close enough to complete replacement in approx. 20 minutes.
Read more
More
$174.95
- Compare At:
-
$208.19
- You Save:
-
$33.24
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH12X10152
Washer won't advance through cycles or gets stuck? Timer controls wash cycle progression. Quick DIY repair—remove lid, unplug harnesses, swap timer.
Do-It-Yourself Stories from Customers like You
I replaced the timer switch on my ge front loader washing machine Ben W. • Transfer , PA • May 10, 2016
I took 2 screws out to remove the lid ,removed the knob unscrewed the 2 screws holding the timer unplugged 2 wire harnesses removed the old switch reversed the process to reinstall the new switch. It was very quick and easy every repair should be so simple
Read more
More
$224.57
- Compare At:
-
$269.48
- You Save:
-
$44.91
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WP27001126
This cycle selector knob is used on some Maytag washers and dryers. This is not the timer knob. Color: stainless steel. Measures about 2 inches in diameter where the handle extends.
Do-It-Yourself Stories from Customers like You
Tempature switch was broken on my dryer Robert A. • Crystal River , FL • August 22, 2016
Very easy. Just found the parts I needed and in less than 48 hours they arrived. It only took about 10 minutes to install. By using AppliancePartsPros.com, I was able to get my dryer working again. Thanks.
Read more
More
$55.30
- Compare At:
-
$65.25
- You Save:
-
$9.95
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 137006070
This is the main electronic control board that manages all washer functions, including cycle selection, water fill, motor operation, and spin speed. It is typically mounted inside the control panel or rear of the machine and connects to the various components via wire harnesses. Replace this board if the washer fails to start, stops mid-cycle, displays error codes, or if buttons and cycle selections are unresponsive.
Do-It-Yourself Stories from Customers like You
E 90 error code on frigidaire affinity washer Charles L. • Omaha , NE • June 02, 2015
We ordered a new control board for the washer after seeing other success stories to resolve this error. I have never done any work on a large appliance, but figured I'd give it a shot. All I needed was a screw driver and about 20 minutes and this was fixed. Works just as expected.
I ordered this part on Friday...it was at my doorstep the very next morning. Unbelievably fast turnaround which was a nice bonus.
Read more
More
$232.71
- Compare At:
-
$276.92
- You Save:
-
$44.21
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 134994800
Fix washer display issues, water level problems, or cycle failures with this electronic control board. Manages wash cycles and system functions.
Do-It-Yourself Stories from Customers like You
Bad concrol board and switch too Samanatha M. • Vinton , VA • August 06, 2015
Replaced these parts with the order from your company.
Read more
More
$284.95
- Compare At:
-
$336.24
- You Save:
-
$51.29
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 809020010
Fix error codes, blank displays, or cycle problems with this washer electronic control board. Restores proper operation when buttons don't respond.
Do-It-Yourself Stories from Customers like You
Display kit Michelle G. • Mesa , AZ • March 07, 2018
Watched UTube video and fixed very easily! Thanks so much
Read more
More
$283.22
- Compare At:
-
$339.86
- You Save:
-
$56.64
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 21001600
White decorative bezel that surrounds the timer control on your washer's console. Replaces cracked, broken, or missing skirts for a clean finish.
Do-It-Yourself Stories from Customers like You
The timer and on/off knobs broke Joseph C. • Wakefield , VA • January 31, 2015
First I used epoxy which I do not recommend since it can interfere with the later replacement of new knobs. The replacement of new knobs went easily with the exception of getting the epoxy off. Getting the epoxy off is difficult and required a Dremel to cut the plastic and slip joint pliers to peel the plastic off.
Read more
More
$79.95
- Compare At:
-
$94.34
- You Save:
-
$14.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WH22X30717
Fix washer beeping, stopping mid-cycle, or not spinning with this control board. Moderately difficult repair requiring console disassembly and careful handling.
Do-It-Yourself Stories from Customers like You
It went crazy sometimes it worked others it would stop every few minutes beep then start again turned itself on in the middle of the night Wendell P. • Anacortes , WA • September 19, 2015
The diagnostic code readout was B2 which I could not find. I replaced the control board. Since I could return it if it was not the part that resolved the issue I chanced it and it was the fix. Thanks!!
Read more
More
$363.27
- Compare At:
-
$428.66
- You Save:
-
$65.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251381
This replacement control knob lets you select settings and operate the appliance's controls with a secure grip and clear position index. Restores reliable user control when the original knob is cracked, loose, or worn. What it does:
- Replaces a damaged or missing control/selector knob so you can turn and set controls accurately
- Snaps onto the control shaft to provide a solid tactile stop and visible setting indicator
- Commonly used when the original knob is cracked, stripped, stiff, or spins on the shaft
- Matches OEM fit and rotation for proper function and alignment
What's included:
Install notes:
- Remove power to the appliance before replacing the knob to avoid injury
- Pull the old knob straight off the control shaft and push the new knob onto the shaft until it seats
- If the knob will not fully seat, check for obstructions or a damaged shaft before forcing it
Do-It-Yourself Stories from Customers like You
Broken control knob Lou C. • Kearny , NJ • July 18, 2015
TOOK OLD KNOB OFF, REPLACED IT WITH THE PERFECT REPLACEMENT. VERY PROMPT SHIPPING ALSO.
Read more
More
$41.95
- Compare At:
-
$49.50
- You Save:
-
$7.55
Out Of Stock
Usually ships within 4 - 14 days