Washer Run Vent Push Button Switch Parts

****** always make sure the unit is fully unplugged from the power before you do anything with the outside of the unit to work inside of the unit and while you are working inside the unit... Also make sure that you turn the hot and cold water intake valves off and make sure you don't pull too much on the two water intake hoses that lead to your washer because they can leak with too much pressure exerted on either end******* 1. Took top off unit by unscrewing mounting brackets at two similar... Read more

• Will not drain

My granddaughter removed the old hose and installed the new hose I had ordered. Read more

• Won't start

I replaced the lid switch using the parts I purchased from applianceparts.com. The control panel had to be removed first and then the cabinet. Read more

Checked all hoses for clogs cleaned them out and problem still existed so it was time for a new pump and since I was in there I replaced the drain hoses as well. Pump and hoses were exact oem replacement parts project took 30 minutes and the wife was happy again!!! Read more

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

I purchased the lid latch assembly and the lid switch strike. Following the clear video instructions for each part, my handy teenage son was able to remove the lid latch assembly and replace it with the new part as well as the lid switch strike. The washer is back to working perfectly for under $100. Appliance Parts Pros carry the parts to repair and at a lower cost than other online retailers. I saved about $30 compared to the other online site and I saved a service call fee. I'm so glad I... Read more

Replaced internal drain hose. and while I was in there I changed some known wear items. water pump,direct drive coupling tub to pump hose and a spring Read more

Took off cover, installed new parts. Read more

The LG Model LG Washer model WM2487HRMA ISSUE: Washing Machine was filling very slowly. Overnight it would fill about 1 or 2 gallons. I would clear the tub by pushing a) Power b) set spin to None c) push Start. That would empty the tub. REPAIR SOLUTION: That did not solve the problem. Second, I replaced both the single (1) Water inlet valve assembly Part Number:5220FR2006H and also the Water Level pressure switch Part Number:6601ER1006E That solved the problem. I can't tell you which... Read more

After not finding the needed parts to extend the hose at home depot, i turned to online help. I was able to find the right parts quickly on your site and was able to even watch a few videos on how to do the repair. I was beyond amazed that the parts arrived the next day, even though a Saturday and even with standard shipping. I was fortunate enough that my repair did not need any real explanation and the job was done in less than 10 minutes. Felt really good to be able to solve the problem,... Read more

I replaced the Tube to pump hose which was very easy. I just tilted the washer on it side and replaced the Hose. Read more

This was a dishwasher swap out. I first turned the water off to the inlet hose of the dishwasher from underneath the sink. Removed the inlet water hose from sink to dishwasher. (use wrench or adjustable wrench) Then removed the screws securing old dishwasher from the cabinetry. I then pulled out the dishwasher from the cabinetry hole it was in. I unplugged the power cord from the wall of the old dishwasher. Then Ii removed the other end of inlet hose still attached to old DW (braided stainless... Read more

• Will not stop filling with water

I replaced the water level switch and hose. After removing the hose, I found that it was clogged, and did not allow the water level to be sensed by the switch. A test after the replacement of the parts was successful. While filling the tub, the water shut off at the small, medium, and large levels as indicated by the switch. Read more

Repairing the problem was the easy part. Diagnosing the problem took a little more time. To diagnose the problem, it took longer because I first cleaned the Drain Pump trap from all the material it collected. Socks, hair pins, and other materials that were not cleaned from pants pockets. It then still did not drain. Repeated the process after finding more materials and a toy that punctured the hose between the tub and the drain pump. Running the drain and spin cycle takes about 11... Read more

Once the knob came I just put it on. It works well. Read more

Unscrewed console and tilted it back. Then removed clips for machine skin. Rocked it back slightly to access the tub side hose. Removed water inlet valve assembly and removed from the valve. Fished out the old hose. Fished in new hose. Reattched it then reassembled unit. Spent 15 min looking for clip I lost on NASTY FLOOR AAAAAARGH! When done I tested it then found the cold inlet hose screen was clogged. Went to store and replaced hoses and inlet screens too. Glanced over at other washer and... Read more