Washer Range/Range/Oven Surface Element Board Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10392973
Washer won't start, cycle through, or complete? This main control board manages filling, agitating, spinning, and draining functions. Moderate DIY repair.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10393444
Genuine Whirlpool part
By: Whirlpool
Part Number: W10393470
Fix a washer that won't start, advance cycles, or respond to buttons with a new control board. Moderate DIY repair restores electronic functions.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10393562
Fix a washer that won't start, drain, or fill with this electronic control board. Restores proper cycle management and operation. Moderate DIY repair.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480108
Fix a washer that won't start, advance cycles, or respond to controls. This electronic control board restores normal operation in about 1 hour.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10480287
Fix a washer that won't start the wash cycle or has unresponsive controls. This electronic control board manages cycle selection and timing functions.
Do-It-Yourself Stories from Customers like You
The vacuum switch wasn't working, test switch, found it was in the control panel circuit Timothy P. • Ravenna , MI • May 11, 2019
Replaced the electronic control panel
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304534256
Do-It-Yourself Stories from Customers like You
Heating element was bad William J. • Taylorsville , GA • June 05, 2018
Replaced old element with new element took all of about 20 minutes to do the entire project I would recommend watching it on YouTube a couple times to get it in your head what has to be done, then get it done, Bill.
Read more
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134556500NH
This user interface control board replaces the oven's front control module so you can send commands and view settings. It restores responsive touch/buttons and proper display feedback for normal operation. What it does
- Receives button/touch inputs and relays commands to the oven control system
- Provides display/status feedback so settings and timers are visible
- Helps resolve unresponsive buttons, blank or incorrect display readouts, or intermittent control behavior
- Works as the main input surface for oven functions like bake, broil, timers, and temperature settings
What's included
- One user interface control board (UI board) — only items explicitly listed by the manufacturer are included
Install notes
- Turn power to the appliance off at the breaker before servicing to avoid electrical shock
- Handle the board and connectors carefully; avoid touching contacts or flexing the board
- Verify connector orientation and secure mounting; test operation with power restored
Do-It-Yourself Stories from Customers like You
The electrical control board failed and i couldn't get an error code because the lights came on and shifted on their own just by touching the dryer Theodore B. • Manning , SC • August 25, 2015
I replaced the electrical control board and the interface board.
Read more
More
Genuine Lg part
By: Lg
Part Number: 5301FR1158Z
This is a heating element housed within a metal assembly that mounts inside the washer's tub or sump area. It heats the wash water to the selected temperature during wash and rinse cycles, particularly for steam or sanitize settings. Replace this assembly if your washer fails to heat the water, displays a heating error code, or clothes are not coming out clean due to cold wash temperatures.
More
Genuine Ge part
By: Ge
Part Number: WH12X1083
Fix a washer that won't advance cycles or stops mid-cycle with a timer control replacement. Restores automatic cycle progression and proper timing.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 134936500
Fix a washer that won't advance through cycles or stops mid-cycle with this timer. Controls wash, rinse, and spin sequences. Moderate DIY repair.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10319808
Fix washer display issues, cycle problems, or unresponsive buttons with this electronic control board. Direct replacement restores full functionality.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W11318729
Genuine Ge part
By: Ge
Part Number: WH11X29552
Genuine Lg part
By: Lg
Part Number: EBR78263905
This power control board is the appliance's main electronic PCB. It manages power distribution and control logic, coordinating sensors and user inputs so the unit's motors, fans, heaters, and valves run when they should. What it does:
- Distributes and regulates power to key components through onboard relays
- Processes sensor feedback and timing to execute programmed operations
- Coordinates operation of motors, fans, heaters, and valves as required
- Common failure symptoms: unit won't power on or start, unresponsive controls/display, intermittent or erratic operation, repeated clicking from the control area, or error codes
What's included:
- 1 electronic control board assembly
Install notes:
- Disconnect power before servicing; verify power is off
- Use ESD protection and handle the board by the edges
- Photograph/label connectors and transfer plugs one at a time, ensuring proper seating and orientation
- Secure the board, reassemble covers, restore power, and verify normal operation
Do-It-Yourself Stories from Customers like You
No power of functionality Steven H. • Orlando , FL • June 03, 2017
I researched the problem online and tried to troubleshoot it by unplugging the machine and holding the start button for five seconds. I plugged it back in and still no response, which indicated it was most likely a bad Main PCB. I order the part and with Appliance Parts Pros' superb standard shipping service I received it a day and a half later. I removed the cover on the bad Main PCB, snapped a quick photo of the wiring and then installed the new Main PCB. I plugged in the washer and it...
Read more
More
$350.48
Out Of Stock
Usually ships within 4 - 14 days
Genuine Whirlpool part
By: Whirlpool
Part Number: 285952
Washer stuck between cycles or skipping rinse? This timer controls cycle sequence and duration. DIY repair typically takes 10-15 minutes with basic tools.
Do-It-Yourself Stories from Customers like You
My washing machine was getting stuck between cycles Robert G. • Flatwoods , KY • October 26, 2014
I knew the timer was bad. I went to the parts train website as i had done before. I found the part in just a few moments. It arrived in 2 days and I replaced the timer. 4 screws and 10 minutes was all that it took.
Read more
More
$241.95
Out Of Stock
Usually ships within 4 - 14 days