- Aav7000aww Series 10 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21352320
The Washer Drive Belt is an OEM part for Whirlpool washing machines. It is crucial for transmitting the power from the motor to the drum, enabling the washing machine to tumble and spin during the wash and spin cycles. The drive belt wraps around the motor and drum pulleys, providing the necessary traction and tension to operate efficiently.
Causes of a bad Washer Drive Belt can include stretching over time, which reduces its efficiency to grip the pulleys properly, or fraying and cracking due to age and normal wear and tear. Misalignment or improper installation can also lead to premature belt failure.
Symptoms of a bad Washer Drive Belt include:
- The washing machine failing to spin or agitate.
- A burning smell or unusual noises during operation, indicating slippage or rubbing.
- Visible signs of wear like cracks, fraying, or noticeable looseness on the belt.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Burning smell
-
Will not agitate
-
Spins slowly
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
The drive belt on my maytag washing machine was worn out Donnie B. • Campobelly , SC • July 23, 2014
I Purchased a new belt and replaced it. If I had not watched the video telling me how it is done the job would have been much more difficult. After watching the video I changed the belt in less than 2 minutes. I ordered the belt from Appliance Parts Pros and got it the next day. I am thankful that when I started my search I landed on your web site.
Thanks for the quick service and the video.
Read more
More
$15.95
- Compare At:
-
$23.33
- You Save:
-
$7.38
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002213
The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently.
Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.
Symptoms of a bad Thrust Bearing Kit include:
- The washing machine is noisy during operation
- The washer struggles to agitate or spin
- The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
- Excessive vibration during use
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Spins slowly
-
Pumps but will not spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Washer squeaked when tub is stopped during spin cycle Daniel K. • Grafton , WI • July 22, 2018
My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the...
Read more
More
$43.95
- Compare At:
-
$59.58
- You Save:
-
$15.63
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21002026
The Snubber Ring is an OEM part for Whirlpool washing machines. This part dampens the vibration and noise produced during the washer's spin cycle. Positioned at the base of the tub, the snubber ring provides a cushion that absorbs the impact between the moving parts and the stationary frame of the washer.
Over time, wear or dust on the snubber ring can reduce its effectiveness, causing increased vibration, noise, and stress on the washing machine components, possibly leading to premature failure.
Symptoms of a bad Snubber Ring include:
- Unusual noise during the spin cycle
- The washing machine vibrating more than usual or "walking" across the floor
- Increased wear and tear on other components due to excessive vibration
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Shakes and moves
-
Noisy
-
Pumps but will not spin
See more...
Do-It-Yourself Stories from Customers like You
Loud knocking and rattle while in spin cycle. Daniel K. • Grafton , WI • July 30, 2017
18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and...
Read more
More
$9.95
- Compare At:
-
$11.84
- You Save:
-
$1.89
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35-6780
The Washer Drain Pump Assembly is an OEM part for Whirlpool washing machines. This component is vital for draining water from the washer drum during the wash and rinse cycles. The pump forces water out of the drum and through the drain hose, ensuring that clothes are cleaned and rinsed effectively.
Symptoms of a failing Washer Drain Pump Assembly include:
- Water not draining from the washer, leaving clothes wet
- Unusual noises during the drain cycle, such as humming or grinding
- Error codes on the washer's display indicating drainage issues
- Water leaks from the pump area or from the washer
- The washer stopping mid-cycle due to drainage problems
Causes of a bad drain pump assembly can include obstructions from debris, wear and tear on the pump motor over time, electrical issues such as short circuits, or damage from improper installation or usage.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Note: This pump has been redesigned and the mounting plate is no longer required. It now mounts directly to the base of the washer.
Do-It-Yourself Stories from Customers like You
The pump on my washing machine went bad William P. • El Paso , TX • April 26, 2014
It was a relatively easy fix. Removed the small access panel at the back of the washing machine after unplugging the unit. The pump is right there. Disconnected the two hoses to the pump, catching some water with towels. Removed three retaining screws, then realized I had not disconnected the belt from under the unit. Easy fix, tilted the unit and disconnected the belt. Put in the new pump , connected the hoses, then reconnected the belts. Works like new!
Read more
More
$74.23
- Compare At:
-
$91.11
- You Save:
-
$16.88
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001950
The Motor Assembly is an OEM part for Whirlpool washing machines. It drives the agitator and drum, enabling the machine to effectively clean and rinse clothes during the wash cycle. The motor assembly is crucial for the proper operation and performance of the washing machine.
Over time, the motor assembly can wear out or become damaged due to factors such as heavy usage, electrical issues, or mechanical failures. These problems can lead to a malfunctioning motor, affecting the washer's ability to operate correctly.
Symptoms of a bad Motor Assembly include:
- The washer not spinning or agitating
- Unusual noises during operation
- The drum not moving
- The washer failing to start
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The washing machine started squeeling and then would not spin agitate or drain at all Robert J. • Parma , OH • December 13, 2014
I removed the belt and found with no load the motor ran but made a grinding noise. I purchased a new motor and installed it. The fix was easy and quick.
Read more
More
$142.95
- Compare At:
-
$168.68
- You Save:
-
$25.73
Genuine Whirlpool part
By: Whirlpool
Part Number: 12002773
The Spring Kit (6 springs) is an OEM replacement part for Whirlpool dishwashers. It includes a set of six springs that are essential for the proper functioning of various components within the dishwasher.
Symptoms of a need to replace the spring kit include:
- Difficulty in opening or closing the dishwasher door
- Spray arms not rotating properly or getting stuck
- Excessive noise or rattling during wash cycles
Causes of faulty springs can include general wear and tear over time, corrosion or damage from moisture exposure, or physical impact or mishandling during maintenance or repairs.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwasher models.
Do-It-Yourself Stories from Customers like You
Out of balance on spin cycle Brian B. • Magnolia , TX • November 24, 2014
Replaced Snubber Ring installed spring kit. Watched installation video, found it very helpful to plan repair. The washer runs like new now.
Read more
More
$60.95
- Compare At:
-
$72.53
- You Save:
-
$11.58
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35-2044
The Lid Hinge is an OEM part for Whirlpool washers. It is responsible for supporting and allowing the smooth opening and closing of the washer lid. Fits the female end of the washer lid hinge. For the male end order WP35-2045 and if you're unable to use the old mounting screw, order WP25-7893.
A bad Lid Hinge can occur due to regular use, wear and tear, or accidental damage. If the hinge becomes loose, bent, or broken, it can compromise the function and safety of the washer lid.
Symptoms of a bad Lid Hinge include:
- Lid not staying open or falling shut unexpectedly.
- Difficulty in opening or closing the lid.
- Visible damage or deformation of the hinge.
- Excessive movement or wobbling of the lid.
This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
This part fixes the following symptoms
-
Lid or door will not open
-
Lid or door won't close
See more...
Do-It-Yourself Stories from Customers like You
Broken door hinge James F. • Brownwood , TX • April 01, 2014
The greatest thing about Appliance Parts Pros is that when I ordered the part, I watched the 2 minute video on how replace it. When the part arrived, the next day by the way, I simply did as the video did.
I love this site! I've repaired my washer and dryer and saved so much money simply by watching these videos and ordering the part. Customer service is amazing as well. They have always given me the correct information and I've never had to wait longer than a couple of minutes for...
Read more
More
$12.53
- Compare At:
-
$15.04
- You Save:
-
$2.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP596669
The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.
Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Leaks at the hose connection points
- Hoses slipping off the connections
- Visible rust or damage on the clamp
- Reduced appliance efficiency due to leaks
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
This part fixes the following symptoms
-
Will not stop filling with water
-
Leaking
See more...
Do-It-Yourself Stories from Customers like You
My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018
First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available....
Read more
More
$7.95
- Compare At:
-
$9.54
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: WP35-2045
The Lid Hinge Pin is an OEM part for Whirlpool washing machines, that connects the machine's lid to its body, allowing for smooth and secure opening and closing. This small part ensures that the washer's lid operates correctly, maintaining proper alignment and function during use.
Over time, lid hinge pins can wear out or become damaged due to excessive force, corrosion, or general wear and tear. This can lead to issues with the lid not closing properly, misalignment, or difficulty in opening or closing the lid.
Symptoms of a bad Lid Hinge Pin include:
- The washer lid not closing or opening smoothly
- Misalignment of the lid when closed
- Excessive play or movement in the lid when it is supposed to be secure
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
This part fixes the following symptoms
-
Lid or door will not open
-
Lid or door won't close
See more...
Do-It-Yourself Stories from Customers like You
Broken hinge pin on top loading washer lid William H. • Cathedral City , CA • September 15, 2014
Wrote down model and serial number. Went to The Google to find replacement part. Among other choices, A'pplaincePartsPros.com came up. Quickly found the part. More to the point (of appreciation) is that there was a video right there on the page about how to replace this part. I hadn't tought much about it, since the lid easily came off with the pin broken. Watched the video, which was well done, and followed those steps quickly and easily. All done. The postscript is that I found the part of...
Read more
More
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285655
The Hose Clamp is an OEM part for Whirlpool washing machines. This clamp secures the hose in place, ensuring a tight connection and preventing leaks during operation. It is essential for maintaining the integrity of the washing machine's water system, securing hoses that carry water to and from the washer.
Common causes of a bad hose clamp include rust, physical damage, or loosening from repeated tightening and loosening.
Symptoms of a bad hose clamp include:
- Water leaks around the hose connection points
- The hose slipping off the fitting
- Visible rust or wear on the clamp
- Difficulty in tightening the clamp to secure the hose
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Syphonbreak was leaking James O. • Bryant , AL • September 04, 2015
We ordered parts from appliance parts pros and I fixed it.
Read more
More
$9.95
- Compare At:
-
$11.74
- You Save:
-
$1.79
Genuine Whirlpool part
By: Whirlpool
Part Number: WP21001932
The Water Inlet Valve Assembly is an OEM part for Whirlpool washing machines. This valve controls the flow of water into the washer during the fill cycles, ensuring the right amount of water is used for washing and rinsing. It plays a crucial role in the overall efficiency and functionality of the washing machine.
Common causes of a bad water inlet valve include sediment buildup, electrical failures, or damage to the valve components.
Symptoms of a bad water inlet valve assembly include:
- The washer not filling with water or filling slowly
- Water leaking from the valve area
- The washer filling with water even when it's turned off
- Error codes related to water intake issues
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
This part fixes the following symptoms
-
Will not fill with water
-
No hot or cold water
-
Will not stop filling with water
See more...
Do-It-Yourself Stories from Customers like You
Water overflow from washer Arthur T. • Marshall , NC • June 09, 2014
I called Appliance pros and asked for a diagnosis. They gave one and sent me the part. It took 15 min. and it worked perfectly. Also got super fast delivery on the part. Thank you!!
Read more
More
$103.95
- Compare At:
-
$122.66
- You Save:
-
$18.71
Genuine Whirlpool part
By: Whirlpool
Part Number: WP22004376
The Motor Spring is an OEM replacement part for Whirlpool top-loading washing machines. This spring applies proper tension to the agitator assembly during wash cycles.
Causes of a bad motor spring can include damage from unintended impacts or fatigue after extended use. Over time, constant movement may cause the spring to weaken.
Symptoms of a bad motor spring include:
- Inadequate cleaning as clothes don't tumble vigorously
- Excessive noise or vibration from the off-balance agitator
- Stalling or failure of the agitator to rotate fully
This OEM Whirlpool replacement is also compatible with some Kenmore, Admiral, Estate, and Roper top-load washer models as well.
Do-It-Yourself Stories from Customers like You
Very noisy while in washing mode Stephen K. • Gunnison , UT • March 13, 2016
Replaced with thrust bearing kit. Watched your video and it took about 10 minutes to fix. Thanks
Read more
More
$5.95
- Compare At:
-
$7.08
- You Save:
-
$1.13
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90767
The Whirlpool screw is an OEM replacement part responsible for securing various components or parts on different types of Whirlpool appliances. The screw is designed to provide a secure and reliable fastening connection, ensuring that different parts of the appliance stay in place. It is commonly used in different locations within the appliance, such as the cabinet, panels, or other structural elements.
This part fixes the following symptoms:
- Loose or wobbly components within the appliance
- Panels or parts that are not securely attached
- Rattling or unusual noises due to loose parts
- Damaged or missing screw
The Whirlpool screw can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
Do-It-Yourself Stories from Customers like You
Certain buttons were'not working Brent T. • Easton , MD • November 17, 2014
One day my wife went to bake something and the bake/broil buttons as well as #3, #9, and oven light ceased to work. Local repair guy came by and wanted to charge $500 to fix it....YEAH RIGHT! Did a little homework and found this website, spoke with knowledgable staff who pointed me in the right direction. Took me all of about 20 minutes to install new control panel..everything works perfect...THANKS!
p.s. In doing my research come to find Maytag did little to insulate control panel from oven...
Read more
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489483
The Screw is an OEM replacement part for Whirlpool appliances. The precise threads allow screws to join or assemble other parts securely.
Causes of a bad screw can include stripping, cracking, or loss of threads due to repeated installation/removal over time. Corrosion is also possible depending on environmental conditions.
Symptoms of a bad screw include:
- Loosened or detached components that were once fastened
- Reduced structural integrity of connections or assemblies
- Potential safety hazards if critical parts become dislodged
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Missing hinges to hold the door up Sandra C. • Gardena , CA • June 05, 2016
Found the parts in the diagram of my fridge and simply installed it very easy
Read more
More
$11.95
- Compare At:
-
$14.10
- You Save:
-
$2.15
Genuine Whirlpool part
By: Whirlpool
Part Number: 207843
The Transmission Lower Lip Seal is an OEM part for Whirlpool washing machines. This seal plays a crucial role in preventing water leakage from the transmission area of the washing machine.
Symptoms of a bad transmission lower lip seal:
- Water leaks or puddles around the base of the washing machine
- Visible wear, cracks, or damage to the seal
- Rust or corrosion around the seal area
Causes of a faulty transmission lower lip seal can include general wear and tear over time, exposure to excessive heat or chemicals, or physical damage from impact or improper handling.
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore washing machine models.
Do-It-Yourself Stories from Customers like You
Bearings were worn out makeing a lot of noise Lawrence L. • Largo , FL • August 08, 2015
I had a lot of problems removing the spin hub, I had to use an air impact wrench to un screw it even then it was very hard, it did not go easy with the hammer & pipe wrench as shown in the video. It was also very hard to remove the bottom spin bearing I had to cut the bearing retainer with a dremel tool so I could get my puller on it. After I struggled to get it apart The repair went very easy, I used brake spring pliers to remove the springs it worked like a charm. I am very pleased with...
Read more
More
$16.95
- Compare At:
-
$20.34
- You Save:
-
$3.39