Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Controls airflow through your microwave's ventilation system. Installs at exhaust opening to prevent air backflow. Replace if cracked, missing, or damaged.
We bought a house with an over-the-range microwave, which just recirculated air into our house--not effective for smoky meals! We removed the microwave and cut a hole to send the exhaust out the back of the microwave (and out of our house), but realized we were missing this damper and frame that go on the back of the microwave for rear exhaust. The parts fit perfectly and now we can enjoy a smoke-free kitchen! Read more
Anti-tip bracket kit secures your range to the floor or wall, preventing tipping when the oven door is opened or heavy cookware is placed on extended racks.
Installed the new bracket as per instructions with template enclosed and it was perfect. Read more
Restores the finished look around your range door perimeter. Replaces cracked, discolored, or rusted trim that frames the door and secures outer components.
Replaced the door trim by removing the 2 screws holding the oven handle on, then removing the 4 screws across the bottom of the door. lifted off the door trim with the plastic door cap. removed the door trim from the cap by sliding it out. attached the new door trim with the 4 screws that had been removed before. then slid the new glass into place. next i slid the plastic door cap onto the new door trim and the glass and centered the glass evenly over the door trim. finally reattached the... Read more
Fix a dishwasher that won't start or run because the door won't latch. This strike receiver allows the latch to engage and signal a closed door.
I have a Kenmore dishwasher and this is the second time doing this repair. The dishwasher door wouldn’t click in place when closed and the lights on the control panel wouldn’t turn on. My kids like to push on the handle to get onto the counter causing the latch assembly piece to break after awhile. It’s a simple fix with the hardest part being getting the front panel lined back up to put back on. I ended up not needing the strike piece but got it just in case it had been bent. Read more
This truss-head machine screw secures a switch to its mounting bracket or panel. Replacing a worn or missing screw restores a solid, aligned switch fit for reliable operation.
I replaced the Switch for the burner. Works fine. Read more
Replacement dishwasher mounting bracket that secures internal components. Install when original bracket is cracked, bent, missing, or no longer holds firmly.
Replaced rusty pieces with new parts. Read more
The Door Latch is an OEM part for Frigidaire microwaves. It is a component that secures the microwave door closed during cooking functions and prevents it from accidentally opening. The latch is designed with a sturdy spring-loaded mechanism to provide a secure seal around the door opening.
Causes of a bad latch can include wear and tear over time, damage from repeated use, or failure of the latch spring or locking mechanism.
Symptoms of a bad microwave door latch include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Replaced door switch block and door latch which were worn. Read more
Secures components and panels inside your dishwasher. Replace if cracked, broken, or missing to restore proper alignment and prevent rattling or shifting.
Ordered a new bracket for the heating element because of all the melted plastic on it. Also ordered a new lower washer arm. Both came quickly and the lower arm I can no longer get from the manufacturer. Both installed quickly and worked like there was never anything wrong. Saved me a lot of money and didn’t have to replace the dishwasher. Will order from here anytime I need to replace parts for any of my appliances. Read more
Guides the door balance cable in your dishwasher's hinge system. Replace if cracked, broken, or causing squeaking when opening the door.
Easy fix, just pull out dishwasher a little for side access. Just make sure you get left & right pulley's. And change both while you're there. Read more
Chrome screw secures handles, door trim, and internal components in ranges and ovens. Replace if lost during cleaning, stripped, or missing after moves.
Got new pieces, put it back together like it never happened. Read more
Guides the dishwasher door balance cable for smooth operation. Replace if cracked, worn, or causing squeaking when opening or closing the door.
Set of 8 screws and washers.
Dishwasher worked fine except the top rack would keep coming off the rails, could see the rollers needed replacement. Washer is 10 years old, and in that time the rollers had become brittle and broken. At first tried to use old screw and washer, but washer was impossible to remove from screw as I have hard water and the calcium deposits seemingly cemented it. Order this screw and washer set and within 5 minutes of getting easily replaced the old rollers. The video was very helpful, as was the... Read more
This dishwasher turbidity sensor measures how dirty the wash water is and reports to the control. Replacing a faulty sensor can restore proper cycle times and cleaning performance for consistent results.
I replaced the sensor and the seals around the door. Read more
Element won't heat or overheats? This infinite switch kit restores precise temperature control to your cooktop's burners. Fixes erratic heating issues.
Seals the connection between the dishwasher tub and sump assembly. Replace if water leaks from the base or the gasket appears cracked or flattened.
Following the great video on the site, I pulled the motor off and was about to put the o-rings on when I noticed there was rust on the motor shaft. Very close inspection showed the o-rings were still good. Not having time to order a motor, and a local store was having a sale, I replaced the whole unit. Read more
This mounting nut kit secures a threaded connection or component inside your appliance, keeping it tight and stable during operation. Replacing a worn or stripped nut restores a solid hold and helps prevent leaks, rattling, and poor performance. What it does:
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.