Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Installation instructions included.
Found the motor switch was fried. So replaced that and the capacitor. Starts fine now. Read more
Liquid-filled balance ring mounts on top of the spin basket. Replace if cracked, leaking, or detached to restore smooth spinning and reduce vibration.
I found that the balance ring had popped loose from the top of the inner metal tub and had been scored so that the fluid was leaking out. So, I removed the metal shell of the washer, then the top plastic cover over the outer tub. I pulled out the old part and put on the new one. I had to give it a pretty good push downward to engage the clips and get it fully seated. I ran my hand along the inside of the metal tub to feel that the new balance ring was fully seated. I also used a short level to... Read more
This tub support assembly holds the washing machine drum in place and includes the spin tube for water drainage. It replaces worn supports that cause excessive vibration, loud noises, or drum movement during operation. Install when your washer shakes violently, makes grinding sounds, or the drum feels loose.
I installed all the necessary parts that I received from you and it works great, now. I received the parts in good time without overnighting them. I had the whole washing machine apart and went through it all before ordering parts. Tear down and assembly was easy. I just took my time. The washer is 17 years old and was well built. It was worth it compared to what is on the market today, and cheaper. Read more
Used for control panel.
Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone. Read more
The washer lid switch actuator is a small component that triggers the safety switch when the lid is closed. Located on the washer lid, it presses against the lid switch to signal that it's safe to operate. Replace if the washer won't start even with the lid closed, or if it continues running with the lid open.
I ordered a door/lid switch kit and an actuator and replaced them both. I probably didn't need the actuator, but it probably didn't hurt to replace it. The only issue I had was that the switch didn't seem to fit that well when installed on it's own, along with the actuator. So, I used the plastic shield which I had, along with the switch and actuator, as well as the old screws, as the screws that came with the kit were not long enough to accommodate the switch, actuator, and... Read more
I found the parts on your website and watched the video and it was fixed in no time. This parts site is always the one I go to first. I've done a number of projects and have never been disappointed. Read more
Use only in brake shoe assembly on roller & pin. Color: White/Grey.
This protective component secures the power cord where it enters the washer cabinet, preventing wire damage from movement or strain. Replace if the power cord pulls loose, shows signs of damage at the entry point, or the washer intermittently loses power.
Catches lint, threads, and strings.
This genuine OEM part is an outer tub for washers. The outer tub is the main tub where clothes are set to wash. If the tub is no longer spinning properly or is making a loud noise as it rubs against the washer, it will need to be replaced. Thankfully, replacing this part is a relatively simple process.To replace the outer tub, start by making sure the washer is unplugged. After that, remove the front panel of the washer. Once removed, lift up the top panel so that it is no longer covering the outer tub. Next, locate the mounting bolts that secure the tub and unthread them using a socket wrench. Once removed, lift the tub out from the washer. Replace with the new tub and secure the mounting bolts. Reinstall the front panel and plug the washer back in. This replacement part is sold individually and is compatible with Whirlpools, Maytag, Kitchenaid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand washers.
Replacement of the tub ring using a part from Appliance Parts Pros and a video from the same on YouTube! Went easy peasy. Read more
Researched this kenmore washer on-line and found the problem to be the lid switch. Saw a diagram on how to jump this switch by connecting a wire to both outside wires on the harness and voila! It worked! This is not a fix but it allowed me to finish the load of unwashed clothes and told me which part was bad (do not run washer jumped like this.......fire hazard!) Ordered the lid switch and it was an easy repair. A $14.00 switch was a lot cheaper than a $450.00 washer. Thanks appliance parts... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.