11021302012 Type 588-10 Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: WP54583
Right hand side. For screws use WPW10119828.
Do-It-Yourself Stories from Customers like You
Whirlpool washer David L. • Linn , MO • August 31, 2015
With the parts supplied from your company. The lady that took my order was good at her job. All the parts were correct and fit. I thank you for the service that recieved.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10846509
The Screw is an OEM component compatible with Whirlpool washing machines. This screw secures the rear bulkhead to the tub, ensuring vibrations are reduced through solid mounting points. Properly installed screws dampen oscillating movement.
Causes of a bad screw include damage from water exposure like corrosion or breakage from stress concentrations if the tub bangs around during imbalanced loads.
Symptoms of a bad screw include:
- Loose or detached rear bulkhead allowing side-to-side play
- Excessive noise and shaking felt through the surrounding walls
- Development of micro-cracks around screw holes over time
- Potential leak paths if holes are no longer sealed
This Whirlpool replacement screw restores a stable suspension system. It is compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Whirlpool direct drive washer major repair drive/brake assembly clutch suspension outer tub etc Carter H. • Oak Ridge , TN • July 11, 2015
Watched several repair videos on YouTube produced by AppliancePartsPros.com for this model Whirlpool washer (videos quite well done). Purchased parts from AppliancePartsPros.com; order correctly filled and parts arrived by FedEx within two working days. Performed repairs as instructed. "Plastic welded" holes in poly outer tub using similar plastic (PP) using a cheap soldering iron - worked perfectly, saved >$150 for new tub. Washer now like brand new. Suggestion - buy the spanner wrench,...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10327522
This timer knob mounts on the appliance's mechanical timer shaft and lets you select cycles and settings. Replace a cracked or stripped knob to restore smooth, positive control of the timer and accurate cycle selection.
- Attaches to the timer shaft so you can set cycle and time
- Provides a secure grip for selecting and adjusting settings
- Common symptoms: knob spins without moving the timer, feels loose, cracked, or missing
- Helps restore proper engagement when the hub is worn or stripped
What's included: 1 timer knob Install notes:
- Disconnect power before servicing
- Pull the old knob straight off the timer shaft
- Align the flat/splines of the new knob with the shaft and press on firmly
- Rotate through a full turn to confirm proper engagement
Do-It-Yourself Stories from Customers like You
Timer wasn't working Susan C. • Painesville , OH • October 25, 2014
BOUGHT NEW TIMER AND INSTALLED IT.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285835
Connects washer drain hose to extension hose. Includes coupling and clamps. Replace if cracked, broken, or when extending drain hose length to reach pipe.
Do-It-Yourself Stories from Customers like You
Washer drain hose not long enough Ray P. • Frankfort , IL • February 07, 2016
I ordered the drain extension kit and the hose connector kit.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: W10843780
Clothes not getting clean? Worn washplate grooves reduce agitation. This washplate restores water flow and detergent distribution for proper cleaning action.
Do-It-Yourself Stories from Customers like You
Wash plate grooves were worn Anthony M. • Menomonee Falls , WI • September 24, 2016
Replaced with a new wash plate.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP90016
Used from harness to top.
Do-It-Yourself Stories from Customers like You
A broken lid switch on my whirlpool stackable twin washer Joseph P. • Indialantic , FL • October 25, 2016
Fixing the problem was quite simple. First, I removed the lid assembly (thanks to the diagrams supplied by AppliancePartsPros.com!). Getting the back two screws out was very difficult because I couldn't see them from the front and I could not move the unit out of the enclosed space. After some trial and error, I located the screws which were 5/16 hex head screws and removed them with a MAGNETIC nut driver. (The magnet assures that the screw will not drop down into the mechanism). Second, I...
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP91770
Right hand side
Do-It-Yourself Stories from Customers like You
Lid was rusted bad Mike S. • San Lorenzo , CA • December 06, 2016
New parts easy fix
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251309
This is a push button switch used to start and stop the wash cycle on a washing machine. It mounts on the control panel and engages the machine's control circuit when pressed. Replace this button if it feels loose, does not click properly, or the washer fails to start or stop when pressed.
Do-It-Yourself Stories from Customers like You
Start/pause rubber button was worn out. Loretta B. • El Cajon , CA • August 31, 2020
Replaced the rubber button.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP285195
This is a small tube of silicone-based gasket sealer used to bond and seal gaskets during washer repairs. It creates a watertight seal between mating surfaces to prevent leaks around tub components or pump housings. Use this adhesive when replacing gaskets or resealing joints where the original sealant has deteriorated and water is leaking.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10285511
Fix unresponsive or erratic cycle selection with this rotary encoder switch. Mounts behind the control knob to restore accurate cycle settings and indicators.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WP489128
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8533928
Machine screw that secures panels, brackets, and components in appliances. Replace when worn, stripped, or missing to restore tight fit and stability.
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 285448A
Hardware washer distributes load under fasteners to prevent loosening and reduce vibration. Replace when missing or damaged to restore secure fit.
Do-It-Yourself Stories from Customers like You
Wash machine water inlet valve Larry E. • Coleharbor , ND • February 18, 2017
Watched a video online, the project took about 20 minutes, went well, parts fit good, the video was very helpful in getting the wash machine up and running.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 350938
Color: Gray. Size: 13 oz. can. Used for coating the dryer drum interior. Acrylic appliance paint.
Do-It-Yourself Stories from Customers like You
Dryer drum completely wore off all coating Larry W. • Ubly , MI • July 01, 2016
Completely removed dryer drum cleaned surfaces ready for paint applied paint acquired from you it did a wonderful job with one can of paint will use for a while and acquire another can of paint for second coat thank you so much for your help the whirlpool dryer drum paint was exactly what it said it would do
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212545RP
Connect hot and cold water faucets to your washer's inlet valves with this 2-pack of 5-foot fill hoses. Replace aging, cracked, or leaking supply lines.
Do-It-Yourself Stories from Customers like You
Leaking water from center bottom of machine Thomas N. • Pleasant Mount , PA • April 05, 2026
- Didn't see any other leaks in machine. No grinding transmission noise. Assumed seal on transmission shaft was bad, since it was a central leak down the rotor. It was a little more difficult to dissemble than the video showed, but not too bad. Got it all back together and seems to be working well. No leaks yet. Didn't need washer in parts diagram - was already on the transmission. Also the drain pump filter was not necessary, it can just be cleaned.
Read more
More
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10249633
This replacement 7-2-1 screw secures components in compatible Whirlpool appliances, providing a dependable fastener for panels and assemblies. Use it to restore proper fitment and reduce rattling or loose parts. What it does
- Fastens trim, panels, brackets, or internal assemblies to keep parts secure
- Helps stop vibration-related noise from loose components
- Restores correct mounting where the original screw is missing or damaged
- Matches the form and fit of the OEM fastener for intended attachment points
What's included
- One replacement 7-2-1 screw
Install notes
- Use the correct driver to avoid stripping the screw head
- Hand-start threads before tightening to prevent cross-threading
- Tighten until snug—do not over-tighten to avoid damaging plastic or sheet-metal parts
- Disconnect power to the appliance before accessing internal areas
Do-It-Yourself Stories from Customers like You
Gear assembly was bad Lewis S. • Cumming , GA • November 06, 2018
Replaced it with a new gear housing assembly. It was some what difficult removing the spindle hub.
Read more
More