17822000 Parts

This camshaft assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. A camshaft assembly is a very important piece of hardware designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as snowblowers, snow throwers, and log splitters. It is compatible with products by brands such as Yard Machines, Troy-Bilt, MTD, and Cub Cadet.The camshaft assembly is a crucial part that rotates in conjunction with the crankshaft of a machine. It performs an important service that involves combining air and fuel as they enter cylinders and the gasses released from them.The replacement or repair process of the camshaft assembly should be straightforward, but the user replacing the part should always be sure to wear gloves during any assembly, replacement, or installation processes. The user should also refer to the owner's manual of their equipment and any guiding diagrams that clarify the placement location.

This is an ignition coil assembly that makes up a major component in several log splitters and snowblowers. The ignition coil assembly is located near the flywheel. It is used to create an electrical charge when the magnet at the edge of the flywheel comes near the coil. The charge is sent on to the spark plug which will ignite a mixture of fuel and air inside the cylinder. Symptoms of a bad ignition coil include an engine that does not start or which turns off at random.If the ignition coil assembly is broken or damaged, it will need to be replaced. A broken ignition coil may not allow the spark plug to create a spark so the engine will not turn on. Remove the ignition coil assembly using a screwdriver and wrench. The fuel tank and other parts will also need to be removed. Replace with a new ignition coil assembly and reassemble the other components.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual part. The ignition coil assembly is created to be used with snowblowers and log splitters manufactured by MTD and Cub Cadet.

This is a recoil starter assembly, also sometimes called a rewind starter assembly, that is a part of many log splitters and snowblowers. The purpose of the starter assembly is to allow a user to crank the tool to start the engine. The recoil starter assembly comes with the plastic housing, a starter spring, a pull rope, a starter pulley, and the hardware needed to install the assembly. If the starter assembly is faulty or broken, it will need to be replaced. The most common symptom of an issue is a broken rope when pulling the starter to turn the engine on.A wrench is needed to replace a broken recoil starter assembly with a new component. The tool the assembly is located on should be turned off and placed on a sturdy surface. Take the spark plug wire off for safety purposes. Remove any nuts and screws that hold the old recoil starter assembly to the tool. Take off the original assembly and install the new one before replacing the nuts and screws.This is an authentic OEM replacement component that is directly sourced from the manufacturer. The recoil starter assembly is sold as an individual item. It is designed to be compatible with log splitters and snowblowers manufactured by MTD and Cub Cadet.

This is an external gasket kit that comes with a variety of gaskets that are used in log splitters made by Cub Cadet and MTD. The kit includes an oil drain plug washer, a carburetor insulator plate, an exhaust pipe gasket, a carburetor insulator gasket, a valve cover gasket, a carburetor gasket, and two carburetor gasket kits. If these parts start to wear out, it can cause leaking of fuel, oil, or air. If the parts aren't replaced, worn-out gaskets can create engine problems and the log splitter may not start or run.A socket wrench and a screwdriver will be needed to replace any of the gaskets in the log splitter. Put the log splitter in the off position and place it on a stable surface before disconnecting the spark plug wire. Depending on the location of the faulty gasket, the engine or carburetor may need to be removed to replace the part. Remove the old gasket, clean the surface, and replace the part with a new component.This is a genuine OEM replacement component that is sourced directly from the manufacturer. The external gasket kit is sold as a single item. It is designed for use with log splitters manufactured by MTD and Cub Cadet.

An exhaust valve is located on many engines found in an assortment of lawn and garden equipment. The function of the exhaust valve is to releases gases from a cylinder after they have been burned. During the induction stroke, the valve closes initially. The engine may misfire, lose power, puff and putter, or perform poorly if the exhaust valve is bad or starting to fail. It will happen with regular use or if damage occurs accidentally. The exhaust valve kit has to be replaced in order to keep the machine running properly.Replacing an exhaust valve kit is a simple project. It requires the use of protective gloves and safety glasses. A valve spring install and remover tool is recommended, along with a small magnet and adequate lighting.The exhaust valve kit is a genuine OEM replacement part. The component is supplied directly from the manufacturer. The exhaust valve kit is sold as an individual unit. The piece is made of durable, high-quality materials. The exhaust valve kit can be installed in MTD, Troy-Bilt, and Cub Cadet machines. It is compatible with various engines found in log splitters and other lawn and garden equipment.

When performing overhauls or repairs of engines, a gasket kit is often required. Gasket kits for lawn and garden equipment include the replacement parts necessary to reassemble the engine cylinder head or block. If the engine is getting repaired or replaced, a gasket kit should be purchased as the original parts are frequently unable to be reused. The gaskets and seals are what ensure the engine is adequately secured and no fluids or air leaks out in open spaces where various components of the engine meet.Working with a engine requires protective gloves for safety. The machine or motor should be allowed to cool completely before starting any repairs. Lay out all pieces of the gasket kit and identify them prior to beginning for an easier repair. Replacing gaskets and seals from a gasket kit is a simple DIY project.This gasket kit is a genuine OEM replacement part. It is supplied by the manufacturer and compatible with only MTD brand lawn and garden equipment. The gasket kit pieces are made from high-quality, durable materials. It contains all the necessary gaskets and seals to complete a engine rebuild or extensive repair. It is sold as an individual unit.