2175Xss-1 Parts

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

This nut is most commonly used with gas-powered chainsaws. The nut is used with a bolt, which is sold separately, to secure the carburetor and air filter together. It is a fastener that comes with a threaded hole. The bolt helps fight against rotation and vibrations that can pull the nut loose.Nuts can experience wear and tear and may become damaged or broken over time. If the nut has broken in half, has significant damage, or has been exposed to corrosive materials, it will need to be replaced. A wrench can be used to remove the damaged nut. Once that nut is removed, the new replacement part can be installed. Make sure to use work gloves and tighten the nut before using the lawn and garden equipment in the future.This is a genuine replacement part that is directly sourced from the manufacturer. It can be used with a variety of chainsaws, string trimmers, edgers, hedge trimmers, leaf blowers, and brush cutters created by Poulan, Poulan Pro, Craftsman, and Husqvarna. It is sold as an individual component. This part is sold individually.

This clip is a genuine Husqvarna part. It is a clip for a high tension lead. It is made for use with chainsaws. The high tension lead clip helps maintain the tension of the chain portion of the chainsaw.It is possible for the high tension lead clip to become worn over time, and it is also possible that the clip can become disconnected and lost as well. In either case, it must be replaced to safely operate the chainsaw.This clip is a genuine OEM part sourced directly from the manufacturer, and it is sold individually. It is made to be compatible with chainsaws made by Craftsman, Husqvarna, McCulloch, and Poulan.

Mounting screw for chainsaws, hedge trimmers, and leaf blowers. Secures internal and external components. Replace if stripped, missing, or damaged.

Chainsaw not oiling chain or bar? This worm gear spring engages the oil pump gear on the crankshaft. Simple fix when oil isn't transferring properly.

Loose or misaligned chainsaw bar? This bar adjustment retainer secures the adjustment screw mechanism. Simple metal clip replacement takes minutes.

Chainsaw won't start or has no spark? The ignition module creates the spark to ignite fuel. Simple 15-minute replacement restores reliable starting.

Fix chainsaw bar oil starvation with this oil pickup assembly. Draws oil from tank through mesh strainer to pump. Direct replacement component.

This oil pickup elbow is a genuine Husqvarna part, sold individually. This oil pickup elbow can be used as a replacement part for chainsaws. The function of the oil pickup elbow for a chainsaw is to fasten around the fuel line and prevent the fuel line from being yanked from the fuel tank by force during inspections or while operating the chainsaw. An oil pickup elbow might have to be replaced if it no longer effectively keeps the fuel line in place and attached to the fuel tank. If the chainsaw user can pull the fuel line out of the machinery, the oil pickup elbow needs to be replaced with this genuine OEM replacement part. This could be as a result of damage to the oil pickup elbow in the form of general wear and tear or loosening over time. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer, and it is sold individually. This oil pickup elbow is compatible with the following brands: Husqvarna, Craftsman, and Poulan.

Seals the carburetor adapter to prevent dirt and debris from entering your chainsaw engine. Replace if cracked, brittle, or leaking. Confirm fit by model.

This ball bearing and seal are used in a range of chainsaw models. It acts as part of the blade assembly and is designed to both lessen friction and stabilize moving parts. This bearing is also set within a race and the entire race/bearing/seal assembly must be replaced at the same time. The bearing is encased with a rubber seal, which prevents fuel leakage and keeps the engine working smoothly. It does not impede the bearing as it turns. Ball bearings are placed in high contact areas and wear down due to friction. They need to be regularly replaced for optimal performance. If the engine shows difficulty while running, or is louder than usual, the seal or bearing may have worn down. This OEM replacement part is sourced from the manufacturer and works with certain models of Poulan small engines, including the Poulan/Poulan Pro 2900, and Husqvarna chainsaws. This part replaces parts 530019259 and 530047827, both of which are obsolete.

Fix a broken or missing pull start handle that prevents engine starting. This chainsaw starter handle works with the recoil assembly for reliable starts.

This is a small filter screen that sits in the oil supply line of a chainsaw, filtering debris from the bar and chain oil before it reaches the oiler mechanism. It ensures clean oil flows to the bar and chain for proper lubrication. Replace this filter if the chain is not receiving adequate oil, the bar is overheating, or the filter screen is visibly clogged or damaged.

The oil tank cap helps keep dirt, insects, and flying debris out of the tank and oil inside of it. Contaminated oil can wreak havoc on the inner workings of your engine because of foreign particles gumming up the mechanics. Keeping the lid tightly shut is the best way to keep your oil clean. Oil caps attach to the outside of a machine, so they are susceptible to physical damage and the elements. It is time to replace the oil cap if it will no longer connect completely to the oil tank. With this genuine OEM product from the original manufacturer, quickly and easily swap out the oil cap before anything can fall into the tank. Just remove the broken cap, feed the blocker into the tank, and screw the new cap on. Compatible with string trimmers and chainsaws made by Craftsman, Poulan, and Poulan Pro. Sold individually.

Complete engine gasket kit for chainsaws. Provides tight seals between connected parts to improve performance and prevent carburetor leaks. Confirm fit by model.

If your chainsaw won't start, runs rough, or stalls frequently, this carburetor repair kit restores proper fuel-air mixture. Includes all components needed.