Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice dispenser not working or just humming? The auger motor drives ice from the bucket to the chute. Moderate DIY repair with step-by-step video guide.
My problem started with a rusting condition in the ice bin that spiraled out of hand. I took apart the ice bin and all the hardware thinking I could clean it with the suggested baking powder. Plastic parts cleaned up like new, metal parts were pitted. I wire brushed and sanded the parts put it all back together and gave it a try. All appeared fine then two days later the ice dispenser stopped. I watched a couple of videos and most pointed to the ice auger motor. One video specifically said you... Read more
Fixes frost buildup on evaporator coils causing warming or ice accumulation. Test with multimeter for continuity. DIY-friendly repair component.
I replaced it with the Mfg. parts bought from AppliancePartsPros.com. The job went very smoothly, I received the parts a day and one-half after ordering them from your website. I am an HVAC contractor and was so pleased with your service that I'll use you again and again. Read more
The Icemaker Kit is an OEM part for Frigidaire refrigerators. This kit includes everything needed to install or replace the icemaker in the freezer, ensuring a steady supply of ice.
Causes of a bad icemaker can include wear and tear over time, water line blockages, electrical failures, or mechanical issues within the icemaker components. Regular use and exposure to hard water can also contribute to the icemaker's decline.
Symptoms of a bad icemaker include:
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Note: The icemaker used in this kit is 241798231 and the water valve is 242252603.
Ordered part and replaced in 10 minutes. Works great and if need future part I know where to go. Read more
Rubber ice dispenser door center seals the ice chute on your refrigerator. Replace if cracked, worn, missing, or not sealing properly to stop frost buildup.
I wasn't sure if it was the door being warped, the spring return being worn, or the rotary damper failing, so I ordered all to update the door mechanism. I also ordered a new micro switch since one of the switches had started to require more and more pressure to actuate. Figured I'd fix it at the same time. Repair was very straightforward and the videos available on this and other repair sites were very helpful. I found a video that showed replacing the door mechanism on a nearly identical... Read more
Plastic mounting block that anchors the refrigerator door handle assembly. Replace if cracked, broken, or causing a loose handle from repeated use.
No problem, 1 min to fix Read more
Evaporator coils frozen solid? Defrost thermostat senses coil temperature and triggers the heater to melt frost buildup. Straightforward replacement.
Checked compressor windings - ok. Start relay looked no rattle or burning. Start capacitor seamed ok but hard to check. No 120VC to start relay at any time. Ordered thermistor, and electronic control unit. Figuring it was a bad thermistor not telling the ECU it was warm and to turn on the compressor. Or the ECU was damaged and was not sending the 120v to the compressor. Changed the thermistor first (cheapest part and as Appliance parts pros has a return policy I wanted to start there). ... Read more
This thermistor is a temperature sensor that monitors the internal temperature of the refrigerator or freezer compartment and sends readings to the control board. The control board uses this data to regulate the compressor and maintain the correct temperature. Replace this sensor if your unit runs too cold, too warm, or cycles on and off erratically, or if a diagnostic code points to a faulty temperature sensor.
Adjustable hinge kit for refrigerator doors. Includes components to secure and adjust door hinges. Replace if worn, broken, or door won't seal properly.
Ordered the replacement parts and had them the next day! Very nice. Read more
Replaces cracked, broken, or missing dairy compartment door on your refrigerator. Installs on the inside of the main door to restore access and freshness.
Simple... I called Appliance Parts Pros. I´ve used them on several other occasions for other appliances parts and I´ve always received fast and efficient service. Thanks guys & gals. Great job...!!! Read more
Glass insert that covers the crisper or snack pan in your refrigerator. Replace if cracked, shattered, or broken during cleaning or handling.
Looked up Refrig. model number on your site, then went to parts map, located part number, checked part to make sure the correct size, ordered part. As simple as that! Also, shipped on same day as ordered and received in 2 days :) Read more
Storage bin that installs inside your refrigerator door to hold bottles, condiments, and containers. Replace if cracked, broken, or missing.
Ordered from a.p.p.com, Great Customer Service, delivery! Read more
Replace your worn freezer door gasket to restore an airtight seal, prevent cold air loss, and reduce frost buildup. Confirm fit by model number.
Loosened the top half screws, pulled the old seal out, put new seal in, snugged top screws, repeated process for the bottom. Went well, no problems. Read more
Specs: 10-16 X 0.500
Supports the refrigerator door for smooth opening and closing. Installs at the bottom hinge. Replace if cracked, broken, worn, or causing noise.
Removed door, pulled out old hinge bearing and replaced with new one. Read more
Interior door storage bin for refrigerators. Hangs securely inside the door to organize food and beverages. Replace if cracked, broken, or missing.
Ordered replacements Read more
The Dispenser Cover Overlay is an OEM part for Frigidaire refrigerators. This part fits over the front of the dispenser, providing a protective and decorative cover for the control panel and dispenser mechanisms.
Causes of a bad dispenser cover overlay can include physical damage from impacts, wear and tear from frequent use, or fading and discoloration from prolonged exposure to sunlight and cleaning chemicals.
Symptoms of a bad dispenser cover overlay include:
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
So I ordered the face plate and other parts that went with it and fixed it myself. The repair man wanted around $600 to do it. I believe kt cost around $160 to fix it myself. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.