Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Spring Tension Hose Clamp is an OEM part for Whirlpool washing machines. It is designed to secure hoses in place, preventing leaks by maintaining consistent tension on the hose connections.
Over time, spring tension hose clamps can lose their effectiveness due to metal fatigue, corrosion, or damage from frequent tightening and loosening. This can lead to leaks and improper hose connections.
Symptoms of a bad spring tension hose clamp include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Took off cover, installed new parts. Read more
If your detergent dispenser is loose or falling off, this bracket secures it to the door panel. Moderate DIY repair requiring door disassembly.
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself! Read more
The Screw is an OEM part for Whirlpool dishwashers. It secures the spray arm to the dishwasher, ensuring it rotates properly to distribute water evenly throughout the dishwasher during cleaning cycles.
Common causes of a faulty spray arm screw include wear and tear from regular use, corrosion from exposure to water and detergents, or damage from improper installation or removal.
Symptoms of a bad spray arm screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
We bought replacement parts from you and my daughter fixed it. It is working now. It would have been nice if all the parts came in a set. Read more
Color: Black. Screw for lower toe panel. For Biscuit screw use 3400865, for white screw use WP3400836.
I had no hope of separating the panel from the frame without damaging the frame since the two parts were rusted pretty badly and the screws holding the panel to the frame were completely beyond salvage. So I had to replace both the panel and the frame. I ended up removing the electrical/electronic connections, removing the panel/frame from the hinge and then replacing it with the new parts. Took about 90 minutes but the hardest part was removing other items from the rusting frame without... Read more
Replacement door spring for dishwashers. Installs behind the lower panel to counterbalance door weight. Replace if broken, snapped, or worn from metal fatigue.
A shout out to A.P.P.: Quality parts always come quickly and are what I ordered. No, they are not always the cheapest nor do they have all parts for everything (who does?) but their website is the easiest to use and cost differences are usually slight. I have found A.P.P. trustworthy and reliable for the ten or so purchases I've made. This repair process requires that the DW be completely free from cabinet sidewalls. For me that meant pulling the DW from its installed undercounter space. I... Read more
The Screw Hole Cap is an OEM part for Whirlpool dishwashers. It covers the screw holes, providing a clean and finished appearance while preventing moisture and debris from entering the screw openings. This helps maintain the dishwasher's aesthetic and ensures that screws remain protected from rust and corrosion.
Causes of a bad screw hole cap can include regular wear and tear, accidental impacts, or misplacement during maintenance.
Symptoms of a bad screw hole cap include:
I ordered the part and it was delivered the next day! Amazing experience! Read more
Replacement hinge brace for dishwasher doors. Anchors the door hinge assembly to the tub. Install if original is cracked, warped, or missing.
Received your parts very fast & installed them with some youtube video assistance. The leak is gone. The dishwasher is once again operational. Beats a $150+ service call where the repairman breaks more than he can fix!!! Read more
Dishwasher won't advance to dry cycle or runs too long? The turbidity sensor monitors water clarity to control cycle length. Accessed from underneath.
Dishwasher not completing cycles, won't turn on, or not draining? The control board manages all dishwasher functions and often causes these issues.
Ordered the controller and installed it. Now it works like a charm. Read more
Door won't latch or close properly? The door latch strike secures your dishwasher door for a watertight seal. Simple 5-minute snap-in repair with video.
I ordered this part and switched the previously used one. Read more
Decorative cap that conceals exposed screw heads on dishwasher panels, console, or cabinet. Replace missing, cracked, or damaged covers for a clean finish.
This mounting bracket secures an appliance component in the correct position, providing stable support and alignment. Replacing a damaged bracket helps stop looseness and vibration that can lead to noise, poor fit, or premature wear.
The original gasket was popping loose and not always noticeable when loading. Followed video for removal, cleaning channel with q-tips, and installation of new gasket. Read more
Gasket for upper wheel.
With the basket out of the dishwasher, the plastic parts basically snap on and off... popped the broken parts off and the new parts on. The 2 wheel and mount assemblies were a little more complicated. The video on the website advises to disconnect the supply line and drain line... I didn't have to do this. I just pulled the dishwasher out of its cabinet a little over a foot and removed the 2 screws holding each assembly in place and removed them. The previous gaskets (2 PER ASSEMBLY)... Read more
Dishes tipping or rattling in your dishwasher rack? This tine positioner clip holds rack tines in place to keep plates stable and properly spaced during wash cycles.
Replaced panel Read more
Wheel mount assembly for dishwasher upper rack. Attaches to rack and glides along side rails. Replace when cracked, broken, or worn for smooth rolling.
Replaced both wheels after watching your video. easy repair Read more
Fix dishes not cleaning or low spray arm pressure by replacing the water supply diverter. Directs water to upper and lower spray arms. Video guide included.
Since I was already taking the sump seal out, I decided to replace the two motors that looked nasty and was making noise too. The ease of ordering these parts with your site made this repair much faster including the repair videos you offer. Thank you for your help. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.