Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement silverware basket for dishwashers. Holds utensils securely during wash cycles. Order when original is cracked, has holes, or handle broke.
Ordered new basket Read more
The Latch Switch Kit, an OEM Replacement Part is designed to ensure the safe operation of your Whirlpool dishwasher. The kit includes two microswitches and a wiring harness. It prevents the appliance from running when the door is open. If defective, the door switch may prevent the dishwasher from operating even when the door is closed.
Causes of a bad door switch can include wear and tear, exposure to moisture, or a broken actuator.
Symptoms of a bad door switch include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I ordered the Door Switch Kit, along with a few other items. However, the switch kit was all that was needed. Isimply followed the instructions that came with the kit. It was necessary to cut the wires which connected to the wire assembly in the door of the dishwasher. I then connected the pieces from the switch kit and then connected the end pieces to the door. I closed the door, and started up the dishwasher. It worked as well as before. Read more
The Dishwasher Drain Pump is an OEM part for Whirlpool dishwashers. It is responsible for removing water from the dishwasher at the end of each cycle, ensuring that dishes are properly cleaned and dried.
Causes of a bad drain pump can include wear and tear from regular use, blockages from debris, or electrical malfunctions.
Symptoms of a bad drain pump include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
When the wife told me the dishwasher was leaving water in the bottom of the tub I hoped it'd be that the filter was just clogged. Nope. We usually clean our dishes before cleaning them which always makes me laugh but the drain was clear after 9 years of use, so I figured it was the pump. This was a $200 minimum for the appliance guy to replace, so I thought I'd try and do it myself. Job wasn't too bad. Found a youtube video from another machine than mine which I hoped would help.. these... Read more
Seals the pump housing to prevent water leaking from the tub onto the motor. Replace if you see leaks around the circulation pump area. Confirm fit by model.
1. To fix the leaks from around the door, I replaced the upper and lower door seals. These were purchased in a separate transcation, so they are not the parts shown here. The upper door seal worked as intended, but the lower seal would not stay in place on the lower edge of the door during a wash. Therefore I cleaned the grease and detergent off the old seal, and installed using silicone sealer/adhesive. The plastic edge pieces for the lower seal were supplied with the kit, and they installed... Read more
Very easy to repair. All the parts fit perfect. Entire repair took 20 mins. Read more
This temperature sensor monitors water temperature inside your dishwasher and sends signals to the control board for proper cycle operation. It ensures water reaches the correct temperature for effective cleaning and sanitizing. Replace this thermistor if dishes aren't getting clean, water isn't heating properly, or the dishwasher displays temperature-related error codes.
Unplug the old twist remove. Push the new one in twist,plug the wires in. Flop around on floor under sink to hook every thing up. Read more
Husband replaced them with new parts we purchased from Appliancepartspros.com. Read more
Cleared out trash from pump. Made E-Z by your exploded views and videos. Replaced worn parts. Read more
Replaced upper and lower spray arms and a few other parts. Read more
Adjuster kit for upper dishrack. Also order retainer part number WP3400918 as needed
I ordered the parts and put them in and it fixed it. Read more
Color: Black. Includes insulation. Other colors: For almond use WP3384157, for biscuit use WP3384157, for white use WP3379921.
Replace filter unit and pump seal kit. This is a pretty straight forward repair. Removal requires a few tools: small socket set, a few torx bits, and a little patience to clean out the extra soap and crud that collects below the filter assembly around the impeller and pump. Diagnosis is also fairly straightforward as you will begin to see and feel grit on your dishes, especially on the top rack and you will see that the filter is full of the same grit. To access the filter, simply remove... Read more
Access panel insulation with glue is the foam or insulating material that attaches to the inside of your appliance's access panel to reduce heat transfer and improve energy efficiency. The pre-applied adhesive allows it to bond securely to the panel without additional materials. Replace this part if the insulation is torn, missing, or falling off, which can lead to temperature inconsistencies or reduced efficiency.
Replaced broken parts. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.