6657502103 Parts

Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more

Replaced glass and trim Read more

Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble ! By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!? While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will... Read more

Primarily, removed oven door. Be cognizant of how you disassembled ... Very important when you reassemble ! By-the-way,this was ALL PRECIPITATED by wanting to clean the interior side of oven door glass after my wife self-cleaned the oven! How in-the-world did grease get there in the first place!? While disassembling door, after removing from body of oven , the right side trim piece (being Very brittle) Broke ! Than, due to the same reason, the left side trim piece Broke ! Yippee ! That will... Read more

• Door won't close

This oven was a Kenmore model #66595822003. I replaced both spring hinges. This oven was a white oven so it took the MFG# WP8053807 hinge (order two of them). They are the same hinge. No left or right. To get the door off the oven, open the door all the way open, I installed pins (preferably only 1/4" long) in the holes of both hinges. Then remove the spring steel retainers above old hinges in the oven frame. These holds hinges in place. Now close the door until hinge stops on pins. Lift up... Read more

After being told by a service repairman that it would cost me close to $200 to repair, I resolved to just not use the dispenser. After about a year, I had decided that I wanted to repair it and would look at the options myself. At the least, I could figure out which parts were needed to repair it and have them on hand for a service guy if I determined I could not do the job myself. The more I studied it, the more I felt confident that I could do it, and sure enough, when the part arrived - a... Read more

Could not level stove. Front leveling legs had pieces broken out where leg contacted floor. Back leveling legs were worn and did not stay at corrected height when stove returned to full weight on floor. Replaced both front and back leveling legs, and stove was able to be leveled. Also bought Touchup Paint for numerous nicks and scratches - color matched perfectly. Read more

I searched on your website for a replacement stem. Unfortunately the stem is not sold separately. I purchased the entire valve after confirming with your online rep that I was ordering the correct part. I received the valve in 2 days removed the stem and inserted it directly into the existing burner valve. Perfect fit easy installation and burner works as it should. Simply repair and I probably saved $100 by not calling a repair tech to come to my home. Read more

REPLACED. Read more

We gave ApplianceParts the model# of the stove they checked their inventory they had the Burner Cap in the right color we ordered it and it arrived in three days, it was the exact replacement. Read more

I have a 10 year old Kitchenaid double oven with warming drawer below and electrical connection is located in cabinet below. I order a service manual from http://www.allrepairmanuals.com. If you have the service manual follow it, it walks a technician thru each step. If you don't have a manual here are a few highlights. Disclaimer the following is for my oven model KEBS208DBL8, your oven service steps may vary. IMPORTANT! First step turn-off the power to the oven (mine was a 40 amp breaker)... Read more

• Door won't close

Found the parts on Appliance pros (love the website navigation); ordered on a Sunday afternoon and they were delivered on Tuesday afternoon. I had the drawer repaired within 15 minutes of Fed Ex delivering the package. No tools required other than my fingers! The original part was riveted to the drawer, these replacements are bolts with nuts and lock washers. Makes me wonder why this was not the original design. The riveted design NEVER seems to hold up to consumer use. Why do it on an... Read more

Ordered 2 infinite burner controls from Appliance Parts Pros and watched the online video on the replacement of them at the same time. When they arrived promptly, I was ready to take on the job. The fix only took about 15 minutes because I was prepared after watching the video. Read more

I looked on line for a parts manual, then typed in a part, and this site came up. They had all the parts I needed. I never did a job like this, but the parts manual pictures made it simple, and then this site made it simple to order the parts. All together looking online, and tearing apart, ordering online, then putting it back together, about 3 hours. I do know how to use tools. Read more

Ordered new screws and door gasket. Replaced the old door gasket now the oven warms up faster and bakes the stuff easier. Replaced the missing door trim screws. Now the door close without making noises. Read more

I decided to replace the whole orifice instead of just the 'spark plug'. In doing so it became apparent that the screws would not come off easily and so I purchased a couple of those to make sure I had enough just in case. Good thing, 2 were messed up taking them out. It was also pretty dirty after 13 years of cooking so I took the time to clean up most of the bits. It was a difficult thing to do and took me a while to get thru all the screws in correct order to remove the part and... Read more