71003237 Parts

This is a high-quality retainer that is typically used in string trimmers. It is made of durable metal and fits in the area between the outer spool assembly and the spring on the trimmer. The purpose of the retainer is to ensure the spool stays in the correct location while the string trimmer is being used. This component can become damaged, break, or be lost and will need to be replaced in order to be sure the spool is supported and secure.If there is an issue with the string trimmer retainer, it can cause excessive noise during use. It also may prevent the trimmer from starting if other components are affected. A wrench and work gloves may be required to replace the part. Gain access to the retainer and remove it using the wrench. The new replacement part can be installed in the same place. Reassemble other parts, and the trimmer will be ready to use.This retainer is designed to fit string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Yard Machines, Bolens, MTD, and Yard-Man. It is sold as an individual part. It is an authentic OEM replacement part that is sourced directly from the manufacturer.

This is a genuine replacement for MTD engines in select models of lawn and garden equipment. The carburetor gasket is situated between the carburetor body and the engine to provide a secure seal to keep air from leaking out. The engine needs proper compression to run and that is ensured by gaskets and seals like this one. Over time, however, these are exposed to constant heat and pressure and can shrink or become damaged as a result. Replacing gaskets is typically considered a part of routine maintenance on most equipment. Gaskets should be replaced immediately when they fail, and inspected any time work is done on the carburetor. This OEM carburetor gasket is designed to work with more than 150 different models of blowers, trimmers, cultivators, and edgers. It can be used in products from brands like MTD, RYOBI, Bolens, Troy-Bilt, Cub Cadet, Husky, Yard Man, and Yard Machines. The gasket is made of durable metal material and is sold as a single unit. Hardware is not included with this item. Be sure to cool the engine before performing repairs and drain the fuel system to prevent leaks and spills when working on the carburetor and its components.

This tiller shaft is a genuine MTD part, sold individually. This tiller shaft can be used as a replacement part in a tiller. The purpose of a tiller shaft in a tiller is to transmit the power of the engine evenly across the appliance while in use, facilitating the rotation and power of the wheels to drive the tiller across a variety of surfaces.The tiller shaft might be subject to various forms of damage that can necessitate its complete replacement at some point within the typical lifespan of a tiller. Damage can include puncturing, scraping, denting, cracking, warping, or eroding, and if this damage is sufficient enough to reduce or negate the functionality of the tiller shaft, it should be removed and replaced by this genuine OEM replacement part to guarantee the safe continued use of the appliance. Always unplug the appliance before performing any kind of repair or replacement.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This tiller shaft is compatible with the following outdoor appliance brands: MTD, Craftsman, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, and Yard Man.

This part is a replacement wheel assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part will replace a broken or defective wheel assembly in several tiller models.The wheel assembly ensures that the tiller can be maneuvered efficiently by the equipment operator. Wheels are particularly subject to wear and tear and may require replacement before the standard lifespan of the equipment. A wheel that is punctured, dented, flat, or worn may prevent the tiller from proper operation. It's important when working on or near an engine to make sure the equipment is powered off and completely cooled down before starting any repairs. Access to proper tools is recommended before attempting this part installation. For more accurate information on how and where to install this wheel assembly, reference the appropriate owner's manual and specific equipment diagrams.This is an authentic OEM replacement part made of high-quality materials. This wheel assembly can be used with tiller models that have been manufactured by MTD, Troy-Bilt, Yard Machines, and Husky. Sold individually.

This reel spool assembly is specifically designed for use with string trimmers and comes with all necessary parts, including the trimmer line and the spool. The line itself is used when the trimmer is in use to cut grass and foliage. The spool is the component that the string is wrapped around to keep it secure while using the trimmer.If the reel spool or the line is damaged or broken, the reel spool assembly should be replaced. A wrench or a screwdriver will be needed to go through the process. When replacing the parts in the reel spool assembly, the spool cover will need to be removed. Make sure the string trimmer is on a sturdy surface and the spark plug wire has been disconnected. Place the spool assembly in the housing, feed the line, and replace the cap.This is an authentic OEM replacement part that is sourced directly from the manufacturer. It is sold as an individual component. The reel spool assembly is compatible with many string trimmers manufactured by Craftsman, Cub Cadet, Ryobi, Troy-Bilt, Murray, Yard Machines, MTD, Bolens, and Yard-Man.

This replacement forward drive v-belt connects to the transmission in certain types of lawn and garden machines and allows the machine to move forward when it is in use. Over time, the belt could start to have issues. In some cases, it may begin to crack and dry out. It could start to flake away and fall apart, which means it will need a replacement. Other times, the belt could simply snap or no longer fit properly. Owners should inspect the forward drive v-belt in their machine regularly to ensure it is in good condition. Before installing a new belt, they should clean the pulleys to ensure the best performance. The genuine OEM forward drive v-belt is sold individually, and it works well for many models of tiller and walk-behind mower. Compatible brands include MTD, Husky, Yard Machines, Troy-Bilt, and Cub Cadet. Buyers in need of a forward belt should always ensure they are getting the right belt for their machine.