911-93481991 Parts

• Little to no heat when baking
• Oven not heating evenly
• Won't start

It took a few of us. One to vacuum up the fire extinguisher residue. One to trip the breaker. One to provide light. One to clean out under the stove while it was pulled out. I disconnected the bake element. I needed help to disconnect one of them because it was very tight. I put the element into the oven and reconnected the right side, very easy. The left side fell back into the slot. Curses ensued. I removed the back plate and it was very easy to thread the left wire back into the oven and... Read more

I spent hours searching for the right trays, knowing only that the stove is GE, and what the trays look like, including exact dimensions. I ordered one set that had exact measurements, and they even explained how the measurements are taken. But the trays were larger than described by 3/8 inch, and I had to pay shipping to return them. I suggested that they correct their description, but the lady did not think I was right. I said just measure them yourself, as per the method that your... Read more

I spent hours searching for the right trays, knowing only that the stove is GE, and what the trays look like, including exact dimensions. I ordered one set that had exact measurements, and they even explained how the measurements are taken. But the trays were larger than described by 3/8 inch, and I had to pay shipping to return them. I suggested that they correct their description, but the lady did not think I was right. I said just measure them yourself, as per the method that your... Read more

• Element will not heat
• Won't start

I ORDER THE TERMINAL BLOCK KIT, AND FOLLOW THE VIDEO HOW TO REPAIRE. IT IS VERY EASY.IT TOOK ME 10 MIN. Read more

• Little to no heat when broiling

Easy fix. Both elements replaced while I was at it, so all new. Figured if one went the other was going to follow. CIRCUIT BREAKER OFF. Removed the back metal panel with my nut driver for the hex head screws. Note where the panel may slip under tabs for support. Remove slip on electrical connections on upper and lower elements. May need a pliers. (I did not want to just pull the element and the wires into the oven with the element and remove them there, like a technician would do. After 15... Read more

I removed the door, mostly so we could really clean the all the nooks and cranny's of the stove, and make the handle and gasket replacement easier. Attaching the new handle was not difficult, but did require some minor door dis-assembly. Removing the old gasket and putting on the new gasket was a breeze. The hardest part of the job was putting the door back onto the stove, but we got it done and the stove looks and works great. Read more

I pulled off the retaining clip with pliers then removed the old knob and timer dial. I replaced all the parts with the new ones and used pliers to reinstall the clip. The teeth on the new knob engage to select the cycle. https://www.youtube.com/watch?v=cQwLtRcHx9k Read more

I measured my oven racks which are 24"X18" and ordered two new ones and had them within three days of my order! They are perfect! Read more

Tested the power to the unit by turning on the cooktop portion and saw that I had power to all of the burners. Turned the selector knob to broil and saw that the top element would heat up. I then turned off the breaker to the unit. I then decided to take out the baking element to do a continuity test. When I touched it, a 1.5 inch section fell out. Since that concluded my continuity test, I assumed I needed a baking element. After receiving the parts the NEXT DAY (amazingly great service... Read more

• Oven is too hot
• Little to no heat when baking

I was able to find the model number on the lower right hand side of the range/oven, a GE True Temp. I Googled it to find parts, and thought I had found the correct sensor, but was very pleased that the ApplianceParts sire suggested I check compatability again before the order. I would have ordered the wrong sensor kit other wise. I DID get the correct one order. It arrived on time. The tricky part was get the old sensor out without having to pull the oven/range combo out form the wall over... Read more

Replaced the large burner control switches for the ones giving trouble. Since the other two switches had seen as much use as the faulty ones, replaced them too. After putting in new switches, found that one large burner had burned out so replaced it also. Range now cooks as good as new Read more

Fast delivery, great service Read more

Replaced the switch infin by watching the video Read more

Got the window and replaced it no time Read more

Called Appliance Parts - service agent was extremely helpful. Tried to find an assembled piece was unable to do so. Send me the individual parts which were very easy to assemble. Was able to replace entire light assembly, reconnect wire with new terminal end. Light works find just now. Would definitely call again if I needed assistance. Read more

All of the information on the web repair sites said "replace the hinges as the springs are worn out." Didn't fix the problem. The top of the door still wouldn't seal, and the. Leaning latch wouldn't catch the door unless you pressed on the door. The inside panel of the door was fatigued. Too many turkeys were set on the door over the years. The hinges are attached to that inside panel, so the stress points were bent over time. I replaced the inside steel panel. Took about an hour. Was able... Read more