Wap24200uc Parts

If your washer won't drain or water pools in the drum, this drain pump forces water out through the hose. Moderate DIY repair, about 1 hour to replace.

The Hinge is an OEM component specifically designed for Bosch front-loading washers. Comprised of precision-engineered washers and backing plates, it secures the tub and door connection for smooth, dependable operation. The hinge washer allows natural gliding movement without door alignment or cushioning issues.  

Causes of failure include wear from years of intermittent friction between heavy-moving components. Physical damage such as cracks around riveted fasteners weaken structural integrity as well over time.

Symptoms include:  

• Noisy or grinding sounds emanating from hinges during use
• Misaligned or leaning door unable to fully close/seal 
• Loose door requiring adjustment more often than expected
• Possible door separation calling for hinge replacement

Replacing with this genuine Bosch hinge washer restores balanced operation. Compatible with some Miele and Asko front-loaders also, smooth controlled movement provides consistent washing relief with OEM replacement.
 

Washer won't spin or shows F:43/E:21 error? Worn motor brushes are the likely cause. This repair typically takes 15-30 minutes with basic tools.

Delivers hot water from your heater to the washer. Replace if leaking, cracked, or damaged to prevent water damage. Verify fit with your model number.

The Fastening Ring is an OEM replacement part for Bosch washers. This part is responsible for securely fastening the boot seal to the washer's drum, ensuring a watertight seal and preventing leaks during the washing cycle.

A bad fastening ring can occur due to wear and tear, damage from foreign objects, or improper installation. Signs of a faulty fastening ring include water leaks around the washer's door or visible damage to the boot seal.

Symptoms of a bad fastening ring include:

• Water leaks around the washer's door
• Excessive noise or vibration 
• Visible damage or deformation of the ring

Replace your worn-out or damaged fastening ring with this genuine OEM Bosch part to restore your washer. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Shock absorber that cushions vibrations during spin cycles. Mounts between the drum and base. Replace if cracked, leaking, or worn to restore stability.

This is an electrically operated solenoid valve that connects to the household water supply lines and controls the flow of hot and cold water into the washing machine tub during fill cycles. It opens and closes in response to signals from the control board to deliver the correct amount of water at the proper temperature. Replace this valve if the washer is not filling with water, filling slowly, leaking at the back, or continuing to fill when it should stop.

Adjustable leveling foot that installs on the bottom of your washer to provide stable support. Replace when cracked, worn, or missing to restore balance.

This is a tub bearing kit for a front-load or top-load washing machine that supports the spin basket and allows the inner tub to rotate smoothly. The kit typically includes the bearings needed to restore proper tub operation. Replace this bearing set if the washer makes loud rumbling, grinding, or squealing noises during the spin cycle, or if the inner tub wobbles excessively.

Fix a washer that leaks or fills when off with a new valve magnet coil. This electromagnetic solenoid controls water flow during wash cycles.

Routes water between internal washer components. Replace if cracked, brittle, or leaking to restore watertight connections. Verify fit with your model.

This is a drain hose that connects the washer's sump to the drain pump or external drain line, allowing used wash water to exit the machine. It is a flexible hose designed to handle the flow of water during the drain cycle. Replace this hose if you notice water leaking beneath the washer, slow draining, or visible cracks and deterioration in the hose material.

The washer water inlet filter is a small mesh screen that sits at the water inlet valve connection point and catches sediment, debris, and mineral particles from your home's water supply before they enter the machine. Keeping this filter clear ensures proper water flow into the washer. Replace this part if your washer is filling slowly, not filling at all, or if the existing filter is torn, corroded, or too clogged to be cleaned effectively.

Suspension spring for washer drum support system. Attaches between tub and cabinet to absorb vibration. Replace if broken, stretched, or detached.

Secures and stabilizes washer components to maintain proper alignment and sealing. Replace if worn, cracked, or causing leaks. Confirm fit with your model.

Front drum motor mounting bushing for washers. Supports the drum shaft for smooth rotation. Replace if worn, cracked, or causing misalignment issues.