Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Quantity of ONE. Size: 8-18 x 5/8 inch. (#8 screw, 18 threads per inch, 5/8 inch long)
I ordered new seals from AppliancePartsPros.com. Finding the right seals was very easy, all based on model number of the appliance. While looking my unit over for other signs of wear, I noticed that a repair done by the prior homeowner to the lower wash arm was done improperly: a seal there was set protruding from the cover, the cover was missing screws, and the arm was missing the upper bushing. So I ordered a new seal, the missing screws, and both the top and bottom bushings (just to be... Read more
This replacement screw secures panels, brackets, and other components in your appliance to keep them aligned and rattle-free. Replacing worn, stripped, or missing hardware restores a tight fit and helps maintain safe, quiet operation.
I ordered two replacement baffles and screws, then lifted the top of the dryer to access the drum and installed the two new baffles. Read more
The Hex-Head Screw is an OEM replacement part for use in Whirlpool dishwashers. This metal screw measures approximately ¾ inch long. Its primary purpose is to secure the dispenser bracket in place, ensuring stable operation. This hex-head screw is designed for use with compatible hexagonal tools. This makes installation and removal straightforward. This part is sold individually and is guaranteed to fit your dishwasher door panel. This screw is compatible with select Whirlpool brand models including Amana, Crosley, Estate, Inglis, Jenn Air, Kenmore, Kitchen Aid, and Maytag.
Pulled a video from online and ordered my parts from Appliancepartspros.com. This was the second repair I've done with your help, the last being my washing machine. This time I replaced the dishwasher detergent dispenser on my Kitchen Aid. You guys make it so simple and give me the confidence to do it myself! Read more
Guides humid air out of the dishwasher tub during drying. Replace if dishes stay wet or no steam vents. Verify fit with your model number.
Grey vinyl touch-up paint for repairing chipped, rusted, or damaged dishwasher rack coating. 4oz bottle with brush. Restores protective coating.
Used the vinyl touch up paint on the tops of posts and slid vinyl tips over 130 posts. The paint acts as an adhesive to keep the tips secure. Read more
Dishwasher door seal prevents steam and moisture from escaping to cabinets. Replace if cracked, torn, or loose. Confirm fit with your model number.
Dishwasher water manifold distributes water to spray arms. Replace if cracked, broken, or leaking. Connects main water supply to dishwasher arms.
Replaced manifold. Remove and replace by hand. No tools needed. Read more
Fixes weak spray and poor cleaning caused by a worn impeller. Mounts on the circulation pump to drive water through spray arms. DIY-friendly repair.
Motor shaft was stripped, replaced with new shaft from Motor Seal Kit. Impeller was also cracked, so replaced it as well. I did run in to a small problem, the chopper blade was pressing against the metal grate on the piece that goes back over the motor seal. I spent about an hour messing with it, but thought maybe once it's all together it'll be fine. When you screw the impeller on, it pushes down the seals, which pushes down the chopper blade. Video on Motor Seal Kit page made it an... Read more
Dishes not cleaning evenly or spray arms not working? The diverter disc routes water to spray zones. Common issue, straightforward 5-10 minute fix.
Replace the leaking seal. Part fitment was original and easy to replace. Read more
Fix a dishwasher not filling with water or filling too slowly. This inlet valve controls water flow into your dishwasher. DIY repair with video guide.
Replaced the water inlet valve and float switch. Read more
Secures the wash arm to its support hub. Replace if cracked, broken, lost, or no longer holding the arm firmly in place during wash cycles.
Ordered a new pump Read more
This mounting screw secures the freezer door handle to the door panel, ensuring the handle remains firmly attached. Replace it when the screw becomes stripped, corroded, or lost, causing the handle to become loose or fall off.
Rather than fighting the set screw, I ordered a new handle and extra parts to fix it. My father taught me to use anti seize which I used on all the threaded materials. Appliance parts and all the parts listed easy to see and Order Read more
Fix a dishwasher that won't start or respond to buttons with a new electronic control board. Controls wash cycles, pumps, and heating functions.
Ordered new latch and control board. Received and Replaced both. Turned the power back on.. Everything is working perfectly. Again. Read more
This is the support tube that connects the upper spray arm to the water supply inside a dishwasher. It channels pressurized water from the circulation pump up to the upper wash arm, allowing it to spin and clean dishes on the top rack. Replace this part if the upper spray arm wobbles, falls off, or if dishes on the top rack are not getting clean due to reduced water flow.
The tray was delivered with the back fence badly bent inward, as if dropped in shipping with some force. The tray was reshipped overnight and all the parts were replaced easily. Read more
Color: White. 4oz bottle with brush used for touching up damage to your dishracks. For blue use W10840471. For grey use WP676455. For tips use 675679
Ordered dishwasher rack tine tips and bottle of vinyl touch up paint. I applied the paint to each tine and then placed the tips on the tines. I waited a few hours before using my dishwasher to allow the paint to dry and allow the tips to stick to the tines. Read more
Connects the user interface to the main control board in your dishwasher. Replace if damaged, heat-stressed, or causing communication issues.
The dishwasher control panel was acting funny, not showing cycle times. So I pulled the plug and restarted it. Then it gave the E2/F2 code. Some googling turned up some ideas, beginning with checking the wires and voltages. I checked those, and found that the control panel was giving the proper voltage. The next step is to replace the user interface. I found the part on AppliancePartPros.com at a reasonable price. They sent it quickly. It was a fairly straightforward install, but you do... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.