Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Agd4675yq Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Console Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8312709

The Console Clip is an OEM part compatible with Whirlpool dryers. This clip secures the control console assembly to the top panel, ensuring it is firmly mounted during operation. Properly functioning clips are necessary to maintain the correct alignment of controls and prevent detachment. 

Causes of a bad clip can include wear and fatigue from repeated opening and closing of the dryer door. Excessive force or impact could also bend or break the clip over time.

Symptoms of a bad clip include:

  • Loose console assembly that is not securely fastened  
  • Misaligned or dangling controls that do not sit flush
  • Dislodged console at risk of detaching from housing
  • Missing clip leaving an open mounting point

This OEM Whirlpool replacement clip is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You My kenmore washer model 11029828801 was agitating during the fill cycle and the tub would only partially fill also at the end of the spin cycle rinse water was spraying in resoaking the clothes   Jay S. • Hammond , IN • February 07, 2017

I read the FAQ section of Appliance Pros parts web site. I found out I needed to replace the temperature control switch, WPW10248240, to correct my problem. This switch also controls the tub filling water level based on air pressure via the attached vinyl tubing. I ordered the switch and the tubing, WP353255, in case mine was no longer any good, and I also ordered the retaining clips for the control cabinet, (2) of WP8312709, because they can be damaged when accessing the controls. My new... Read more

More
$20.38

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Gas Burner Tube With Adjustable Air Shutter
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693140

If your dryer won't heat or flame won't stay lit, a corroded burner tube may be the cause. This assembly includes an adjustable air shutter for proper combustion.

Do-It-Yourself Stories from Customers like You Dryer not heating   Ray M. • Marissa , IL • October 03, 2014

I removed the kick panel/door and confirmed there was no flame. Inspection with a flashlight revealed the igniter was damage - partly broken away. Using a 1/4" socket set I removed the burner assembly. Inspection showed the burner was rusted and the flame deflector had fallen off. I ordered both the "Dryer Igniter and Bracket" and a burner. They arrived in about three days. I had to attach the igniter to the bracket (one screw) and then the bracket to the burner (one screw). The only... Read more

More
$87.40

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Gas Regulator Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694422

Spring installs inside the gas pressure regulator assembly on gas dryers. Replace if lost during conversion between natural gas and propane fuel types.

Do-It-Yourself Stories from Customers like You I needed to convert from lp to natural gas   Mark S. • Raleigh , NC • June 01, 2015

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

More
$17.48

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Natural Gas Regulator
Genuine Whirlpool part
By: Whirlpool
Part Number: WP694423

Dryer making high-pitched sound when igniter turns on? This natural gas regulator maintains proper gas pressure to burners. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You I needed to convert from lp to natural gas   Mark S. • Raleigh , NC • June 01, 2015

Removed LP Orifice and LP Gas limiter. Orifice was easy, however the gas limiter was the tricky one because I had no instructions to what went where. I could not find anything online as to how to convert from LP to Natural Gas, but you could find several things as to how to convert from Natural to LP. I ended up finding the Dryer schematic on line for the Whirlpool Duet natural gas dryer and was able to figure out what sequence the Spring, regulator and limiter went in. The order I just... Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Gas Valve Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: 279923

Dryer won't heat or pilot lights but shuts off? This gas valve assembly controls burner ignition and flame. Typical DIY repair in 45-60 minutes.

Do-It-Yourself Stories from Customers like You The gas Dryer would not dry clothes because the pilot would ignite but the gas would turn on for a moment then turn off. Eventually the gas would not come on at all.   Kenneth S. • Columbus , MI • March 24, 2014

I decided the problem was with the gas valve and I found the part on your web site. I ordered it and received the part in 3 days. I replaced the valve and the dryer works like new! This also gave me an opportunity to vacuum out the dust/lint that collects in and around the dryer. Read more

More
$158.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Screw (8-18 X 5/8)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP693995

This 8-18 x 5/8-inch screw secures dryer panels, brackets, and covers. Replace missing or stripped fasteners to restore a tight fit and stability.

Do-It-Yourself Stories from Customers like You There was no power cord and accessories to attach it   Terry C. • Martin , TN • December 27, 2016

I put all pieces that I ordered on the dryer and plugged it in. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Dryer Door Handle
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10549553

Replace your dryer's broken, cracked, or missing door handle. Mounts to the front of the dryer door for easy grip when opening and closing the drum.

Do-It-Yourself Stories from Customers like You Broken dryer handle   Lester B. • Phoenix , AZ • October 19, 2015

Watched the repair video and the job was very easy. Read more

More
$11.12

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3390631

10 - 16 x 1/2

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing   Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Support Washer (1-1/2-In Dia)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3388703

This flat support washer provides a stable bearing surface under a fastener. Its 1-1/2-in diameter helps distribute load, maintain spacing, and keep components aligned so hardware stays tight and assemblies operate smoothly. What it does:

  • Distributes clamping force to prevent pull-through and gouging
  • Maintains proper spacing and alignment between mating parts
  • Helps reduce vibration, rubbing, or wobble from a loose assembly
  • Replaces a cracked, deformed, or missing support washer
What's included:
  • One support washer
Install notes:
  • Disconnect power and shut off water/gas before servicing.
  • Note the order and orientation of any washers/spacers during disassembly.
  • Inspect mating hardware and surfaces; replace any worn or damaged parts.
  • Tighten fasteners to manufacturer specifications—do not over-tighten.

Do-It-Yourself Stories from Customers like You Drum support bearing failure.   Myron D. • Covington , KY • July 13, 2018

Simple fix, right parts fast. Read more

More
$4.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Clip Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 279220

Includes two bumpers and two locking clips. You will use one or the other depending on hole size.

Do-It-Yourself Stories from Customers like You Gas dryer did not heat and excessive lint inside the unit   James C. • New Boston , MI • July 20, 2017

Our 19 year old Whirlpool dryer quit heating. After checking the thermal fuse, I found the ignitor electrically open. I bought an ignitor at a local store as there was a national holiday the next day and I did not want the dryer inoperative waiting several days for shipping. I can say AppliancePartsPros is MUCH cheaper for the identical Whirlpool genuine part. While changing the ignitor, I noticed there was an excessive amount of lint in the dryer, which was caused by worn drum seals. I ordered... Read more

More
$12.32

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Drum Baffle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP692490

Plastic drum baffle that lifts and tumbles clothes during drying. Replace if cracked, broken, detached, or missing from inside your dryer drum.

Do-It-Yourself Stories from Customers like You Baffle detached stripped screw holes   Judith R. • Chandler , AZ • August 09, 2014

I installed it my self by watching your video Read more

More
$71.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Front Top Panel Lock
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8066092

Fix rattling or gaps at the top of your dryer with this front top panel lock. Secures the panel to the cabinet frame for a tight, aligned fit.

Do-It-Yourself Stories from Customers like You Switch was bad   Barbara W. • Houston , TX • November 01, 2026

Purchased a new switch and installed it Read more

More
$19.31

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Motor Mount Clamp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3404162

Fixes excessive vibration and rattling from dryer motor movement. This clamp secures the motor to its bracket, restoring stability. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Motor locked up and was buried in lint due to the felt seal failing and letting lint into the motor area.   Steven O. • Shrewsbury , MA • February 06, 2022

Replaced the motor, blower, rear drum felt seal, and drive belt. Vacuumed up the lint everywhere, cleaned extra lint out of the chute, around the blower, and rear vents. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Dryer Timer
Genuine Whirlpool part
By: Whirlpool
Part Number: W11043387

Dryer won't start, stops mid-cycle, or runs continuously? A faulty timer disrupts cycle sequencing. This mechanical timer restores proper operation.

Do-It-Yourself Stories from Customers like You Timer would not start heat on automatic setting   Nikita P. • Glen Ellyn , IL • July 26, 2026

Replaced timer Read more

More
$138.41

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Nut
Genuine Whirlpool part

Nut

By: Whirlpool
Part Number: WP357213

Push-in.

Do-It-Yourself Stories from Customers like You Agitator wasnt sloshing   Paige B. • Clarksville , TN • January 30, 2015

I looked inside and saw the teeth were worn off the "dogs" so I purchased the Cam Agitator repair kit and a new bolt. Getting the old bolt out was the hardest part since it was worn and rusted. I ended up having to buy a set of socket extensions and a set of stripped bolt sockets so $45 in tools and it took me an hour to get the old bolt out but putting everything back together was a breeze. I was very proud of myself, as a woman, that I fixed this problem myself and didnt have to pay a repair... Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Bracket
Genuine Whirlpool part
By: Whirlpool
Part Number: W11684613

Replace a cracked or missing bracket to keep appliance components securely mounted and aligned. Restoring this support helps prevent movement, vibration, and premature wear, so the connected part operates as intended.

  • Provides a rigid mounting point for an associated component or assembly
  • Maintains correct alignment and spacing within the appliance
  • Helps reduce vibration, rattling, or shifting during operation
  • Replaces brackets that are cracked, bent, or broken
  • Common signs: loose or wobbly parts, misalignment, rattling noises, or visible bracket damage
What's included: 1 bracket Installation notes:
  • Disconnect power; also shut off the water supply before servicing
  • Wear cut-resistant gloves—bracket edges can be sharp
  • Reuse original screws/clips unless replacements are specified
  • Hand-start fasteners, align parts, and tighten evenly without overtightening

Do-It-Yourself Stories from Customers like You Drive belt support rollers and idler pulley worn.   Carlos W. • Port Orchard , WA • May 30, 2020

Disassembled dryer, replaced worn parts and reassembled dryer. Removed top cover, disconnected front connector, removed front panel, removed belt from idler pulley, removed washer drum and belt, replaced push clip, retaining clips, 2 support rollers and idler pulley. Reassembled in reverse order. Read more

More
$13.66

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google