Need Help?
Call or text
Is your ice maker producing little or no ice? A cracked or warped blower fan duct disrupts airflow to the ice compartment. Moderate DIY repair.
Since it is difficult to get to the fans, I decided to replace both and avoid any future problems. I ordered the evap and duct fan motors and replaced both. I ordered the fans expecting it to take a week for delivery. They arrived the next day. The door of the freezer section must be removed, along with its slide rails to get to the cover panel in the rear of the freezer. Once the cover is removed, access to the motors is good and it's just unplug the old motors and plug in the new. I would... Read more
Fridge running warm or uneven temps? This air tower assembly channels cold air through the refrigerator. Restores proper airflow and consistent cooling.
After checking the defrost heater to confirm it was ok. I replaced the main electronic board. That wasn't it. After 1 1/2 weeks, it frosted up again. I called and talked to a tech person at APP and then ordered the air tower, defroster thermostat, and temp sensor. I installed them all and the frig works great. I know replacing all those parts at once didn't confirm which one failed, but I just wanted it fixed. The cost was less than having a service call. The parts arrived the day after... Read more
Ice maker stopped working or not filling with water? This assembly replaces a failed unit. Easy DIY repair—just two screws and a plug connection.
The ice maker stopped producing ice. The motor just made a periodic spinning noise and the ice maker never filled with water. I ordered a replacement ice maker and the valve just in case. I just ended up replacing the ice maker, which is just two screws and a plug. A couple hours later, the new Ice maker was making ice as good as new. Read more
Refrigerator not cooling or running constantly? This compressor powers your cooling system. Advanced repair, allow 2-4 hours for replacement.
Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.
Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more
Rubber grommet that mounts and cushions the compressor on your refrigerator or freezer. Replace if cracked, worn, or causing vibration noise from unit.
Installed new stainless steel pan replacing broken original plastic pan and installed new rubber grommets for the compressor Read more
Mounting screw for refrigerator doors, shelves, kickplates, and interior components. Replace missing, stripped, or corroded screws during repairs.
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Secures the evaporator fan assembly behind the rear freezer panel. Replace if cracked, rusted, or missing to restore proper fan mounting and clearance.
The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more
If your dispenser light stays off or won't turn on, this control board restores proper illumination. Moderate DIY, requires clip release and wiring.
Chatted online with a an individual from Appliance Parts Pros regarding replacement bulbs and instructions for our GE Profile PSHW6YGXCDSS Side-By-Side Refrigerator and our GE Advantium SCA2001 Cooking Tool. He gave me the part numbers for the bulbs and they were ordered and delivered very quickly. The bulbs for the the Advantium (WB36X10328 ) were easy to replace using just a screwdriver to remove and replace the protective covers under the appliance. However, the bulbs for the ... Read more
Replacement door bin that mounts inside your refrigerator door to store and organize items. Needed when original bin is cracked, broken, or missing.
Bought one. Read more
Fastens refrigerator panels, brackets, and internal components. Replace this screw if the original is missing, stripped, or damaged to restore secure mounting.
Quickly on the face grille. Dismantled ice tray and inserted auger. Everything is pretty obvious for dismantling except the spring in the rod on the bottom (pay attention to how it is attached to the rod) and the plastic screw on the front of the auger (use pliers to grip it and it is reverse thread). Read more
Plastic retaining clip that secures drawer divider modules in place. Replaces broken, cracked, or missing snuggers to restore proper fit and separation.
Bought two replacement pieces (one as a spare), and snapped it into place. Read more
Hex head screw for refrigerator panels, brackets, and assemblies. Replaces missing, stripped, or rusted fasteners to secure components properly.
You sent us the correct kit and my husband fixed it. Read more
Ice spilling outside the dispenser or jamming in the chute? A cracked funnel is often the culprit. This replacement guides ice cleanly into your glass.
Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.
Because I have had to replace this fan before, the process goes pretty fast.. I am impressed with AppliancePros for a number of reasons, the price for componets is always cheaper that other major parts suppliers. They go to great length to insure all ordered parts are shipped and in a timely fashion.. Also the live tutorials are a great help for the Doit yourselfer.. Read more
Secures the condenser fan motor in position. Replace this bracket if cracked, bent, or causing excessive vibration to restore stable mounting.