Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Links the dispenser solenoid to the ice chute door in your refrigerator. Replace if the crank is broken, cracked, or worn, preventing proper closure.
REPLACED DISPENSER CRANK ARM, SPRING, FLAPPER FOR DISPENSER. THE REPAIR WAS VERY SIMPLE WITH NO PROBLEMS AT ALL. Read more
Replaced Ice maker very easy. Read more
The Drive Cup is an OEM part for GE refrigerators. This part engages with other parts to drive the ice out of the molds and into the storage bin.
Causes of Drive Cup failure can range from physical wear and tear from regular use, which may lead to cracks or deformities in the part, to accumulation of frost or ice that hinders its movement.
Symptoms of a malfunctioning Drive Cup include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered new auger and installed it and now we have clean ice for our drinks. Read more
The Ice Door Spring is an OEM part compatible with GE refrigerators. It is responsible for providing tension and support to the ice chute door, allowing it to open and close smoothly. When you activate the ice dispenser, the spring helps to release the door and allow the ice to pass through. After dispensing, the spring assists in closing the door to prevent cold air leakage and maintain the desired temperature inside the refrigerator.
You should replace the ice door spring if it loses tension or breaks, which can happen due to regular wear and tear, frequent use, or accidental damage. A faulty spring can lead to issues with the ice dispenser's operation and overall efficiency.
Symptoms of a bad ice door spring may include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
The ice dispenser door was not closing tightly. As a result, there was frost build up in the ice chute, which also was allowing ambient air and temperature into the freezer compartment. Upon further inspection, there was black “schmutz” on the ice door, and the rubber ice funnel and deflector parts were deteriorating. Because the door was not closing tightly, I also assumed that the door-closing spring was week. The parts I ordered were: ice door assembly, ice funnel, ice deflector, spring and... Read more
Fridge was making clicking noise and not cooling. Ice dispenser wasn’t working either. Research lead me to believe main board was out. YouTube video said to also replace compressor start relay and overload as well. Replaced all 3 parts in 15 minutes and back up and running. Read more
I emptied door shelves and used plastic sheet to close off refrigerator. The repair was done with refrigerator running. I removed door and changed riser cam and shim. Then replaced door. It took maybe 45 minutes from start to finish. If I did the job again it would be completed in 30 minutes or less. The videos are informative. Thank You Read more
Refrigerator won't cool and compressor just clicks or hums? The start relay helps the compressor motor start. Moderate DIY repair, clean coils first.
I researched the problem and determined that the only thing that can cause this was compressor bad or not starting. Since it was cold the day before I felt it had to be the starter parts and ordered them. It was also very important to clean the coil which I believe caused the over heating. Read more
This is the ice container only.
Drilled out the rivets on the rear of the bucket shelf on each side (needed an angle drive drill for the left side) and removed the front screws. Installed the new shelf both sides with original screws in the front and 8-32 bolts and nuts in the rear. 3 screws to install the bucket to the auger assembly. Read more
Color: Black.
White plastic end cap for side-by-side refrigerator door handles. Replace yellowed, cracked, or discolored handle caps to restore appearance.
Replaced handles. Read more
This left-hand drawer slide assembly mounts inside the refrigerator's fresh food section. It supports the shelf/cover and guides the drawer on its track, restoring smooth operation and proper alignment when the original rail is cracked or worn.
I bought whole new ice bin and it it's now the ice is great. Read more
This replacement part is a snack pan slide rail, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. This part is able to hold up other trays and racks in the refrigerator and freezer so that extra shelf space can be utilized. These slide rails can also hold up trays that can support heavy bottles and drinks. A new snack pan slide rail might be needed if the current ones have become stripped and are unable to latch onto the shelving to support it. It is common that these parts can become brittle over time as exposure to low temperature wears down the plastic. Be sure the shelving of the appliance is clear before attempting to replace the slide rail. This is an OEM part sourced directly from the manufacturer. It is sold individually. This replacement part is compatible with different types of appliances made by General Electric.
Ordered parts from appliance parts pros and completed installation myself Read more
From the AppliancePartsPros web site I found that 80% of the time either one or both of the defrost heater or timer caused these symptoms. Ordered and received the parts in less than 2 days. Replaced both parts in less than 2 hours without any hassles. Only 48 hours have past but all is operating with the proper temperatures. The most likely failure was the defrost heaters, they were totally blackened when removed and the new ones were clear glass when installed. I have no way of knowing... Read more
Changed the washer behind fan blade and it quieted right down. Read more
Color: white. It measures about 2 inches high by 1 inch deep.
The web sight was a snap..enter the model number and diagrams pop up so you can see exactly what parts you need to match. The parts arrived quickly and were well packaged. Thank you Read more
Replaces a broken, cracked, or worn refrigerator door hinge assembly. Restores proper door alignment and eliminates sagging, rubbing, or uneven gaps.
Did a Google search for the model number of the refrigerator and looks like I got a hit on common parts from a variety of locations. I got online on a Sunday and chatted with the AppliancePartPros team and decided to order it in a couple days. Ordered the part and removed the old one and installed the new one. Fit perfect. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.