Dmt400rhsxxa Parts

Very smooth. I ordered the door and the control panel. It is helpful to have an extra set of hands when removing the screws from the door or place something under it so it doesn’t drop. The door comes off with about 10 screws. They are different length. Short screws go into steel, long go into plastic. Remove the door and upper facia/control panel. You’ll need to disconnect the wires. The panel has two parts that need to be transferred. 1. The electronic panel. It’s white and has a row of... Read more

• Leaking

I just had to pull the old out and push the new one in. Read more

• lights flashing or blinking

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

• Will not fill with water
• overflowing

Initially we discovered the LE code was due to water in the base due to the over flow. Of course my warranty was up and 1 month later the DW finally stopped with this error. We pulled out the DW and soaked up the water in the sensor on the right side base where it collects water. This got rid of the LE error code. The LE error kept making the drain go constantly so we had to turn off the power in order to stop the draining. The drain activity would go constantly even after opening the door... Read more

Bought 2 new wheels and it works perfectly. Yay! Read more

I replaced the water level sensor on the side of the dishwasher. Had to completely take out dishwasher and set on its side. Removed three hose clamps and three electrical disconnects. I have hard water and it looked like the float inside of the sensor wasn't moving properly. Read more

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

Replaced both left and right ropes Read more

After researching the Internet, I thought the drainage hoses were my problem. First I changed both drainage hoses. That didn’t solve the problem. I had to look for another area that was causing water to drip into the pan. I found water leaking from behind the brake assembly. Since I didn’t get an oE error code, I eliminated the brake assembly as causing my problem. I ordered a brake gasket and cover. Once I got it properly installed, problem solved! Read more

Parts arrived faster than promised. I unscrewed both holder screws. The new arm snapped right in the new holder. Then screwed the new arm holder assembly back in to the dishwasher. The repair took only a couple minutes and dishwasher is working again. I am very satisfied with purchase and shipping speed. Read more

We took apart the filter and scrubbed out all effected areas. During the process we ended up damaging the original filter and needed to order a new one which is where APP.com came in. We were able to restore our dishwasher to working condition the next day as the shipping was extremely quick. Read more

Since my Samsung Dishwasher would not drain and had a flashing quick light, I removed the racks and both spray wands. Which allowed me to remove the lower screen assembly. This revealed a worn and broken check valve and broken grinder blade. I cleaned the inside of the dishwasher and removed the unit from under the counter. I removed and cleaned the brake assembly ( large transparent plastic section on left side of the dishwasher). I cleaned this for preventive maintenance by taking the float... Read more

I had a over level water alarm. First I installed the level sensor and that did not fix the problem. Second I installed the Brake;DMT800,R. After installing the brake I had a leak detection alarm and could not get the dishwasher to reset so with the dishwasher still out of the cabinet and the metal plate off of the side. I then placed a fan pointed in the area of the repair and let it run over night to dry out any water that came from changing the part and may be causing the alarm. The next day... Read more

Research indicated that it may be a moisture sensor failure or a leak. It ended up being a leak from the oil seal on the motor shaft. A small piece of plastic made it's way into the system. The hot water softened it enough that it wrapped around the motor shaft, re-hardened, then tore into the shaft seal. I fixed it by replacing the shaft seal, moisture sensor (corrodes when it gets wet), and replaced the sump seal since I had it disassembled. Read more

Took off access panel, found leaking part. Looked it up with appliance pro and ordered the part, a new valve. Valve arrived in 2 days. I put the new valve on and we're back in business! Fast shipping, reasonable prices and the shipping charges were not more than they should be. excellent experience, will do business again! Read more