Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Sealing is an OEM part for Bosch dishwashers. It serves as a protective barrier between the control panel and the internal components of the dishwasher, preventing moisture and dust from entering and causing damage.
A bad sealing can occur due to wear and tear, exposure to moisture, or accidental damage. Signs of a faulty sealing include water seeping into the control panel, visible cracks or gaps, or a loose fit.
Symptoms of a bad sealing include:
Replace your damaged or worn-out sealing with this genuine OEM Bosch part to restore your dishwasher. This Bosch part can also be used on Thermador and Gaggenau appliances.
I replaced the controller, the thin seal @ the top and the cable in the door and has seemed to resolve the issue. I removed the three screws that were in the upper part of the door handle slot and took out the inner panel screws on the door. No need to take the screws for the hinges out. The door will spring shut once you take the inner panel off so be careful. You'll need a Torx screwdriver Read more
Fix E15 error code or water tap light on your dishwasher. The float housing detects water levels in the tub. Moderate DIY repair, typically 30-45 minutes.
Found your very helpful videos. I removed and replaced the float and the switch. Seems to have done the job. Read more
Seals the dishwasher sump to prevent water leaks during wash cycles. Replace if you notice leaking at the base or constant drain pump operation.
I replaced the gaskets with products from this site which I would not have been able to do without the video on this site. Hard job. The leak was still there though, so I have some hints with this kind of washer. 1) There is a float switch on the base that turns on the drain pump when there is a leak, that is why the drain pump runs constantly, it prevents catastrophic flooding in many cases. The float consists of a little styrofoam donut that lifts an arm, all white. The arm is connected to a... Read more
The Lower Dishrack is an OEM part for Bosch dishwashers. It provides the necessary rack space for washing dishes beneath the upper rack level.
As Bosch's signature FlexSpace design, it folds up for easy loading but must withstand heavy loads regularly. Causes of damage can include impact or misalignment bending the rack over time.
Symptoms of a problematic lower dishrack include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
We ordered the crockery basket (lower rack). It worked perfect. Read more
Fix a dishwasher that won't power on or reset with this on/off switch. Replaces worn or moisture-damaged switches. DIY-friendly installation.
Initially performed troubleshooting over the phone with Bosch customer support and did preliminary research on the web. Ultimately had to call out service technician to isolate/confirm problem. He confirmed the problem was most likely the switch (if not, the actually computer processor) and gave me the part number (since it was going to take 10 BD's for him to get the part). I ordered through Appliance Parts Pros and received the part in only 2 days. However, upon trying to install it, I... Read more
Replace your broken, cracked, or missing dishwasher silverware basket. Holds utensils securely in the lower rack during wash cycles. Includes handle.
After having seen the video I installed the new lid and it worked. Read more
Rotating spray arm distributes water across dish racks during wash cycles. Replace if clogged with mineral deposits, cracked, or damaged from impact.
Dishes were not getting clean, I tried cleaning the original arms but after a number of tries I just wanted clean arms. Changing arms was extremely easy and the dishes are getting amazingly clean! Read more
Cable harness for dishwasher base wiring system. Connects pump, controls, and electrical components. Replace if damaged by rodents or frayed wires.
Wire harness replaced Read more
Traps food particles and debris during wash cycles to keep water clean. Replace if clogged with buildup or if plastic retainer fails. Verify fit by model.
The wash arms and filters were plugged with calcium and no longer spraying. Needless to say this impacts cleaning. The replacement parts were top quality and fit perfect. This simple replacement of parts put new life in trusty Bosch. Read more
Adjustable leveling foot stabilizes your dishwasher on uneven floors. Replace if cracked, worn, or missing. Installs at base corners for proper alignment.
The parts were to complete the install. Not a repair really. Although this was my first dishwasher install DIY. and thanks to the very fast and accurate parts delivery I was able to get everything done right the first time. Read more
Replaces sliding rails that support and guide the upper dishrack along tub sidewalls. Needed when rails are cracked, worn, or broken causing binding.
I only needed a flat head screwdriver to remove the clips holding the parts in. It took all of 10 minutes and the dish washer is running great now. Read more
Mounting screw that secures the toe kick panel to the bottom frame of your dishwasher. Replace if screw is lost, stripped, or damaged during installation.
My order arrived very fast and was easy to install. Read more
Replacement crockery basket for your dishwasher. Holds plates, cups, and saucers at adjustable levels. Replaces cracked, broken, or damaged baskets.
The Heat Pump is an OEM part for Bosch dishwashers. This pump works to circulate air within the dishwasher during the drying cycle, helping to remove moisture from washed dishes. Causes of a bad heat pump can include a malfunctioning heating element that fails to produce warm air, broken or misaligned fan blades that don't circulate air properly, or worn out motor that no longer operates effectively. Symptoms of a bad heat pump include:
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
I changed the heater / pump. Read more
Seals the detergent dispenser to prevent leaks and ensure proper release during wash cycles. Replace if detergent leaks or dispenser malfunctions.
Replaced dispenser. It was hard to snap into place. You don't need to order separate gasket it comes with it. Read more
Hose, with o - ring, shu (uc/12 & above)
This Sump to Float Hose is an OEM part for Bosch Dishwashers. It functions to carry water from the dishwasher sump to the float assembly. Continuous water flow and exposure to detergents can lead to wear or damage over time.
What Causes a Bad Sump to Float Hose: Exposure to chemicals and hot water, along with wear from water flow, can cause the hose to degrade or develop cracks.
Symptoms of a Bad Sump to Float Hose:
Used vids on youtube for steps on how to disassemble and install the pump; search "Bosch dishwasher circulation pump replacement". Also on AppliancePartsPro forums, a poster put up the Bosch "Dishwasher Service Training Manual" in .pdf. Search "Bosch dishwasher low pressure" on the forum. It's one of the post with the longest thread. Six pointers. 1. In another forum post, the poster noted that some hoses were brittle with age - and cracked when reinstalling. I had same issue (my washer is... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.