Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement cap that seals the water filter housing and attaches to filter cartridges. Needed when cap is cracked, broken, or missing notches prevent secure fit.
Replaced filter cap with new one. The minor challenge was to find a method of pulling the filter out of refrigerator (which is normally done by pulling on the filler cap. The filter was recessed to far into the refrigerator for me to be able attach the new cap. I had to find another tactic to remove the filter. The solution was to look at the replacement filter to notice where two slots were located at the end of the filter. I then used a paint can opener (found at most paint stores) to slip... Read more
Water leaking from bottom of fridge? Cracked evaporator drip tray lets defrost water escape. Moderate DIY repair, about 45-60 minutes with our guide.
The drain pan (Tray-Evaporator Pan) was cracked in 2 places. We had to remove the front panel. Loosen the bracket that holds the water filter. Take off the back panel and disconnect the bracket that holds the selenoid. It was not necessary to unhook the water lines, just the bracket. It was not easy to remove the old pan and get the new one in, but holding the water filter, with the bracket intact, as far to the left side of the refrigerator as possible gave us the room to get the pan in. ... Read more
Secures the handle end cap to the center of your refrigerator door. Replace if missing, stripped, or lost during handle repairs. 8-18 x 1/2 inch size.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Fix an ice maker that stopped working or leaks water into the bin. This ice mold tray replacement takes about 10-20 minutes with our step-by-step video.
I have a Whirlpool Side-by-side Model ED22PWXBW01. A year ago, the ice cubes started freezing together in the rear of the ice bin for no apparent reason. Although the problem started off small, it gradually grew much worse, and finally I could see water dripping out of the ice mold and into the bin during the fill cycle. Re-levelling the refrig didn’t help, nor did adjusting the cube size / fill level. With guidance from the video, I removed the icemaker from the wall of the freezer. The... Read more
Replacement door bin for refrigerator door storage. Installs on the inside of the refrigerator door. Replace if cracked, broken, or missing.
Thanks to the testimony of others on the site, I knew exactly which parts to order. The triangular holder which keeps the ice storage container was cracked so I replaced it. I also ordered a new Auger Motor Drive Shaft which makes the curvy metal piece in the bin turn. Mine had worn down and would not turn the curvy metal piece anymore. Replacing these pieces worked like a charm. My kids were amazed that ice now comes out of the door after 2 months of having to reach inside. Read more
Stores and chills water before dispensing. Replace if cracked, leaking, or causing slime/film buildup in dispensed water. Installs inside refrigerator.
After watching installation videos on each felt I could pull it off and ordered and received replacement water reservoir and water dispenser tube assembly. Reservoir installation went off without a hitch outside of the added step of the need to remove the entire main in waterline assy in order to access the connectors which also were not as represented in video, in that they were not the press-to-release type but standard threaded compression types. Water Dispenser tube/spout assembly was much... Read more
Freezer icing up or refrigerator too warm? This defrost control board coordinates defrost cycles to prevent frost buildup. DIY-friendly 15-30 min repair.
Tried to put refrigerator in defrost mode and defrost would not initiate. Checked the bi-metal and heater, both tested good. Replaced the ADC board and refrigerator went in to defrost. problem solved. Read more
Fix a loose or wobbly dispenser paddle with this strain relief. Cushions the dispenser arm connection to prevent wear. Easy 5-minute repair with video guide.
With the help of the fantastic videos provided on the web site for each replacement part, it was extremely easy to complete the repair Read more
Creates an airtight seal around your refrigerator door perimeter to maintain proper cooling. Replace if cracked, torn, or no longer sealing. Confirm fit by model.
Easily found replacement part at AppliancePartsPro.com. It arrived surprisingly soon after order. Watched the "how to replace" video and followed guidance. Removal and replacement went very smoothly and better than hoped for. Door now seals tight. Read more
Refrigerator warm but freezer cold? Noisy evaporator fan? This mounting grommet reduces vibration and noise. Takes about 1 hour to replace with video guide.
I could not be happier with my Appliance Parts Pros experience. I googled my symptoms, and the 2nd result was a video from Appliance Parts Pros describing what the problem might be and exactly how to fix it. There was such a close match between my symptoms and the description that I ordered the parts --- with a 365 day return policy, my risk was limited. Almost too good to be true, the parts arrived next business day! I took it slow (about an hour) to install the new evaporator fan motor,... Read more
Forms an airtight seal around your refrigerator door to maintain temperature and efficiency. Replace when torn, cracked, or no longer sealing properly.
It was not hard at all to replace our refrigerator door gasket. First I found appliancepartspros.com because I was looking up on YouTube how to do the replacement. Your video was excellent and showed me that I indeed could perform the job. I had a question about the replacement door gasket and emailed your service team at the end of the day. By next morning you had replied with the actual part number for the gasket. Shipping was fast. I had watched the video several times and so performed... Read more
Replace your cracked, broken, or missing refrigerator door shelf bin. Mounts inside the door to store condiments, beverages, and small items securely.
Ordered shelves from appliance parts pros on friday, they arrived on Tuesday. Read more
Replace your cracked, broken, or missing refrigerator glass shelf. Tempered glass with polymer border installs by sliding into shelf slots. Easy DIY swap.
Quick install of new parts Read more
Horizontal metal rod that secures glass shelf panels inside your refrigerator door. Replace if broken, bent, or missing to prevent shelf slippage.
Cut piece to fit Read more
Lower door hinge kit for side-by-side refrigerators. Includes left and right hinges. Replace worn, cracked, or missing hinges to restore proper door swing.
Put the new hinges on the doors fyi you need to tell what size the screws are for the hinge kits would help a lot Read more
Cracked or missing ice maker cover exposing internal components? This protective cover shields the ice maker assembly. Simple DIY install in minutes.
Replaced icemaker and shutoff arm. Easy project. Read more