Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Seals the fresh food compartment to prevent air leaks and moisture buildup. Replace if torn, worn, or not sealing properly in corners. Verify fit by model.
Bought this door gasket and watched the video, very easy if you just take your time and start in one corner and go to the opposite corner. this way it stretches the seal completely into each corner. do as the video says and it will go great. Read more
Replacement crisper pan for refrigerator produce storage. Installs in lower compartment. Needed when original is cracked, broken, or missing.
Cleaned the slide areas really well and ordered new drawers. Read more
The Icemaker Fill Tube Fitting is an OEM part for Whirlpool refrigerators. This part connects the water supply line to the icemaker, ensuring a seamless and leak-free delivery of water into the icemaker mold.
Causes of a bad Icemaker Fill Tube Fitting can include wear and tear over time, mineral buildup from hard water, which can block the water flow or damage the fitting, and improper installation that may lead to leaks or restricted water flow.
Symptoms of a bad Icemaker Fill Tube Fitting include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
I watched your how-to video. It explained the repair PERFECTLY. It was an easy repair and the video was very detailed. It took the guesswork out of the repair. I was done in 5 minutes. thanks for taking the time to post videos for your parts. I'll shop here again. Best Regards, Chad M Read more
The Compartment Door is an OEM part for Whirlpool refrigerators. It is designed to cover and protect specific compartments within the refrigerator, such as the dairy or deli section, helping to maintain the ideal temperature and humidity levels for stored items. It measures approximately 9 inches by 6 inches.
You should replace the compartment door if it becomes damaged or worn out. Causes of a bad compartment door can include cracks or breaks from frequent use, hinge damage, or warping due to temperature fluctuations.
Symptoms of a bad compartment door include:
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Ordered a replacement from AppliancePartsPros.com. I was shocked at how fast it arrived after ordering (only 2 or 3 days with regular shipping). My usual experience with parts suppliers is a lengthy "fulfillment" time before the item even ships. Read more
Replacement endcap kit for refrigerator door handles. Includes upper and lower caps to restore broken, cracked, or missing handle endcaps for a secure fit.
The parts from Appliance Pros fit the existing handle and the refridgerator door handle now works. My home companion showered me with kisses. Read more
Fridge not cooling but freezer works? A worn evaporator fan blade prevents cold air circulation. Easy 15-minute DIY fix with our video guide.
I read some diagnostic suggestions provided by Appliance Parts Pros and determined fan needed replacing. I got the fan in two days! I used regular shipping and APP delivered on time. My story is that I live in the country and no one returned my calls for repair - so I figured I could get this done. I watched the online video on APP website. Opened up back of freezer after removing ice making and cleaning up ice buildup, I installed the new fan motor. It was easy and my fridge is now cooling... Read more
Plastic endcap that fits on the end of refrigerator shelf trim for a finished look. Replace if cracked, broken, or missing to secure trim in place.
I took the old shelf bar out the door and replaced it with the new one. Fit perfectly. Looks awesome. Read more
Replacement end caps secure refrigerator door shelves to the door panel. Needed when original caps are cracked, broken, or missing, causing shelves to sag.
Fixed with new exact replacement parts. Read more
The Screw is an OEM fastening component specifically designed for securing interior panels and assemblies of Whirlpool brand appliances.
Causes of a problematic screw include stripping, corrosion, or shearing from repeated installations and removals during service procedures.
Symptoms of faulty screws include:
Compatible models include brands produced by KitchenAid, Maytag, and some Kenmore.
I ordered a new handle from Applisnce Parts Pros. It fit the refrigerator perfectly. I reused some of the old screws and ordered one new screw with a cover to attach the bottom of the handle. Now the refrigerator looks as good as new! Read more
Secures door shelf bars in refrigerator doors. Replace broken, cracked, or missing end caps to keep shelves stable and prevent bars from falling out.
I can't believe that we lived with this shelf bar continually falling off for years due to a broken end cap. Easily found the replacement end cap on AppliancePartsPros for our 18 year old refrigerator. The "repair", if you can call it that, took perhaps 30 seconds -- remove old broken end cap, insert new one. Done. No more shelf bar falling off. One of life's little annoyances just went away. Read more
Freezer frosting up or refrigerator not cooling? The defrost timer controls the defrost cycle. DIY-friendly repair, typically 30 minutes to install.
Replaced the heater, timer, and wiring harness Read more
Ice buildup in freezer or tripping breakers? The defrost heater melts frost on evaporator coils. Moderate DIY repair with multimeter testing recommended.
First replaced defrost timer. Iced up again after 2 weeks. Then replace the defrost heater. So far so good. Read more
Secures door shelves in place on your refrigerator. Replace if cracked, bent, broken, or missing. Installs on interior door to hold condiment shelves.
Got on line, looked up the model #, looked at the parts diagram, found what I needed and placed the order. Couldn't have been simpler. You folks are GREAT!!!!!! THANKS Read more
This screw is used to secure the handle end cap to the center of the door. The screw size measures 8-18 x 1/2 inches.
This was actually one of the easiest fixes I’ve done. All that was required was to remove 3 screws to remove the broken part. I used a pair of pliers to remove the moisture sensors from the broken part to the new one. Read more
Small plastic washer that supports the refrigerator door hinge assembly. Replace if worn, cracked, or missing to restore proper door alignment.
Watched video and gathered tools I needed. Very simple, and I’m a 72 year old woman! Took maybe 15 minutes to replace both freezer and frig hinge washers. Both doors work like new. Read more
The Door Shelf Bar is an OEM part for Whirlpool refrigerators. This part goes on the door to hold condiments on the shelf. This does not include the endcaps. Causes of malfunction involve cracks developing from weight stress on fasteners. Symptoms of a problematic shelf bar include:
This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.
Note: In some cases, you may have to cut to fit.
It just popped right in after I received them promptly from you all! Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.