Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Etw4400 Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Clutch Spring Cap (Washer)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP62646

This clutch spring cap retains and protects the clutch spring in your washer's drive/clutch assembly, maintaining proper tension. Replacing a worn or missing cap helps the clutch engage smoothly and reduces slipping and noise during spin.

  • Secures the clutch spring within the clutch assembly to prevent movement or dislodging
  • Maintains correct spring preload for consistent clutch engagement
  • Can help reduce clutch slip that appears as weak/no spin, slow spin ramp-up, or intermittent spinning
  • Common signs of trouble: rattling or scraping near the drive, burning smell, or a visibly damaged/missing cap
What's included: 1 clutch spring cap Install notes:
  • Unplug the appliance and shut off water before servicing
  • Access the clutch per your model's service procedure; removing the gearcase/transmission and clutch may be required
  • Carefully relieve spring tension and note the orientation of the spring and cap before removal
  • Inspect the spring, clutch lining, and related hardware; replace any worn components during reassembly

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Fill Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212641RP

5 foot. Package of 2.

Do-It-Yourself Stories from Customers like You Our 11 year old Maytag clothes washer had an ld error code and we suspected the water pump was bad there was a hum when the machine was trying to pump the water   David F. • Berlin , MD • April 12, 2021

We found the pump online at AppliancePartsPros.com for our model of Maytag. When we found the part, there was a video posted that was for our exact pump and washer. After watching it, we called Appliance Parts Pros to verify the part. The customer service representative was incredibly helpful and confirmed our diagnosis. We ordered the pump as well as hoses and clamps in case we needed them. We ordered them overnight delivery and the customer service rep said that we might not receive it... Read more

More
$29.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer E-Ring Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: W10083190

Secures shafts and pulleys in your washer to prevent axial movement. Replace when worn or damaged to restore proper alignment. Confirm fit with model.

More
$7.71

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Switch Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

  • Loose or rattling switch within the console face  
  • Difficulty selecting cycles as buttons wobble out of place
  • Water intrusion hastening corrosion of electrical terminals
  • Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Neptune mah4000 had a no spin but did pump water out but not all of it   Guillermo S. • Chicago , IL • March 06, 2017

I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Hose-Fill
Genuine Whirlpool part
By: Whirlpool
Part Number: 8212656RP

Kit contains two 10 feet inlet hoses.

More
$32.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Drain Hose U-Bend Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577378

Secures your washer's drain U-bend to prevent leaks and keep plumbing properly aligned. Simple push-fit installation takes just minutes to complete.

Do-It-Yourself Stories from Customers like You I lacked a bracket to direct the exhaust hose on my washing machine into the sink   John D. • Astoria , NY • October 25, 2014

Once I got the part, it was a simple matter to push the flexible rubber hose through the bracket which held the hose securely and directed the water into the basin of the sink. This part never came with the GE product. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
6' Fxf Vacuum Bags (2-Pack)
By: Pro
Part Number: TJ726RBFFP

These replacement 6" FXF vacuum bags capture dust and debris to restore pickup performance and keep the appliance's airflow and motor compartment cleaner. Designed as a direct-fit consumable for compatible bagged upright and canister vacuums. What it does:

  • Collects dirt, dust and debris so particles stay contained for easier disposal
  • Helps maintain suction by keeping the vacuum's intake and motor chamber clearer
  • Reduces dust and allergen re-distribution compared with a torn or overloaded bag
  • Replaces worn or full bags that cause reduced capacity, visible dust escaping, or increased odor
What's included: Two 6" FXF replacement vacuum bags. Install notes:
  • Always unplug the vacuum before removing or installing bags
  • Remove the full bag carefully to avoid spilling debris; seal and dispose per local regulations
  • Verify correct orientation and secure fit before operating to avoid leaks
  • Replace bags regularly; inspect the inlet collar and seals for wear when servicing

More
$10.74

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Wire Tie
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879

 

Do-It-Yourself Stories from Customers like You Kenmore washer made humming noise no agitation no more spin   Peter W. • Cupertino , CA • October 18, 2026

Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Washer Wire Connector Block
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876590

Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.

More
$9.82

IN STOCK
Ships Tomorrow Guaranteed
Add to Cart
Best Seller
Washer Vacuum Break Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8317926

Connects the vacuum break to the outer tub in your washer. Replace if cracked, split, or leaking to prevent water from bypassing the tub during fills.

Do-It-Yourself Stories from Customers like You Hose broke sending water that was supposed to goto the tub directly onto the floor.   Trent M. • Tinley Park , IL • March 14, 2014

Unscrewed console and tilted it back. Then removed clips for machine skin. Rocked it back slightly to access the tub side hose. Removed water inlet valve assembly and removed from the valve. Fished out the old hose. Fished in new hose. Reattched it then reassembled unit. Spent 15 min looking for clip I lost on NASTY FLOOR AAAAAARGH! When done I tested it then found the cold inlet hose screen was clogged. Went to store and replaced hoses and inlet screens too. Glanced over at other washer and... Read more

More
$24.68

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Balance Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387240

The Balance Ring is an OEM part for Whirlpool washing machines. This part maintains the stability of the washer drum during the spin cycle. It contains liquid that helps balance the load, minimizing vibrations and noise while ensuring smooth operation.

Causes of a bad balance ring can include general wear and tear, exposure to heavy or unbalanced loads, or physical damage.

Symptoms of a bad balance ring include:

  • Excessive shaking or vibrating during the spin cycle
  • Loud banging noises
  • Washer moving or walking during operation
  • Uneven or off-balance loads

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine would shake so bad during the spin cycle that it would move about a foot   Charles L. • Arroyo Grande , CA • April 17, 2017

I first checked to make sure the washer was level. The washer is on a concrete floor. After watching lots of you tube videos I ordered all the parts that could be causing this problem. I ordered: Balance Ring, Suspension Pad Kit (3 rectangle plastic wear pads), Tub Suspension Pads(3 curved plastic wear pads), Suspension Spring, and a Spanner Wrench tool. After getting the washer apart it was obvious that the problem was the Tub Suspension Pads they had completely worn away so that only the... Read more

More
$81.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Outer Tub
Genuine Whirlpool part
By: Whirlpool
Part Number: 63849

Replace your washer's cracked or leaking outer tub. This housing holds the inner basket and prevents water from leaking into the machine's interior.

Do-It-Yourself Stories from Customers like You Outer tub cracked   Brian H. • North Tonawanda , NY • February 06, 2015

Replaced tub and center post seal Read more

More
$234.53

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Control Knob (Gray)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8538957

This gray control knob replaces a worn or broken knob on the console so you can accurately select settings. It fits onto the timer/selector shaft and restores a secure grip with smooth, positive engagement. What it does:

  • Attaches to the control/timer shaft on the front panel
  • Lets you turn and select cycles or options
  • Restores a snug fit when the original knob is cracked or stripped
  • Common symptoms: knob spins freely, falls off, won't turn settings, or is missing
What's included:
  • 1 gray control knob
Install notes:
  • Disconnect power before servicing
  • Pull the old knob straight off the shaft; retain any insert/clip used by your model
  • Align the new knob with the shaft and press firmly until fully seated
  • Test all settings for proper engagement

Do-It-Yourself Stories from Customers like You Bad water level switch& control knob.   Jimmy A G. • Port Lavaca , TX • March 13, 2017

Removed upper cowling swapped out switch. Read more

More
$48.46

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Brake Release Cam
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8546461

Fixes grinding noise or basket won't spin issues by disengaging the brake during spin cycles. Restores smooth operation when cam wears out or breaks.

Do-It-Yourself Stories from Customers like You No spin every thing else worked made high speed ticking noise   Anthony D. • Follansbee , WV • May 12, 2015

First I looked at the many you tube vids, and there are many. appliance parts pros pretty much shows you how to deal with the parts. I changed the brake shoes and the clutch assembly which also comes with the driver cam. I also changed the metal brake operating cam. I think that brake lockup or improper brake release was the problem that broke the plastic cam driver. This was the broken plastic part making all the ticking noise. I first changed the coupling on the motor but that wasn't bad. in... Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Endcap
Genuine Whirlpool part
By: Whirlpool
Part Number: 279960

Note: END CAP KIT CONTAINS (1) RH. & (1) LH. CAP

More
$60.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Spring Damper Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3946792

Washer won't spin or vibrates excessively? This spring damper assembly cushions the drum during spin cycles, reducing vibration for smooth operation.

Do-It-Yourself Stories from Customers like You My washer wouldn't go into a spin cycle.   Joshua P. • Cohutta , GA • April 18, 2021

I bought a clutch liner kit installed it in 5 minutes now it spins faster than ever. Read more

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google