Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Washer won't spin or makes loud noises? A faulty drive motor is often the cause. Moderate DIY repair with video guide. Fixes E58 error codes.
Tested the resistance of the motor windings. They showed around 2.5 ohms. This proved that the motor was bad. The new motor showed around 3.5 ohms. I installed it back in place and the washing machine worked fine. Read more
Replaces a cracked, broken, or missing washer drum baffle. Mounts inside the drum to lift and tumble clothes during the wash cycle. Easy installation.
Had to bend down the retaining tabs (on the drum) a little to allow the paddle to slide on. Placed the paddle with the tabs in all of the grooved slots, pushing down with one hand, I used my palm to firmly push/tap it into its locked position. I purchased new vane screws (Part #: AP2106572 "131302800") and used a Phillips driver to screw them in (one each paddle). It's that simple! Read more
This is a drawer handle, and it is intended for use on washers. This is a genuine replacement part made by Frigidaire. This part is a drawer with a handle attachment commonly used to store detergent or fabric softener. It is an important part of the washer unit and is a simple repair or replacement. Simply remove the old drawer handle and slide the new one in place.A new drawer handle might be needed if the current one is broken or damaged in any way including being cracked, chipped, or bent. This might cause the drawer to have difficulties opening or closing. It is common for the drawer to obtain slight inconsistencies overtime and might need replacing due to normal wear and tear. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with washers made by Frigidaire.
Bought the matching part from Appliance Pros just using my Model#. Read more
We had a power surge that tripped the washer breaker. It showed an E23 error code so I replaced the main control board (part number AP4362398.) All washer activity back to normal except it still wouldn't spin and still had E23 code. I removed the tub to pump hose (part number AP3837322) to find all sorts of goodies inside such as underwires from bras, a quarter, nickel, penny, and dime stacked perfectly on top of each other inside the filter, and tangled yarn from a rug. Ended up replacing the... Read more
Washer won't start, powers off mid-cycle, or shows error codes? The electronic control board manages all cycles and components. DIY repair in 30-45 minutes.
About a year ago, the washer was doing a similar thing, where it would shut off before the spin cycle started. The coin trap was completely clogged then, so I checked it first this time. It was clear, so I took the drain pump out and checked that as well. Nothing seemed to be physically wrong with the machine, so I put it in diagnostic mode, which gave me error code 43 when I tried the spin cycle. This one of the codes for a bad control board. Replacing the board only took about 15 minutes.... Read more
This replacement door glass forms the clear window in the door of select front-load units, restoring safe visibility and proper door fit. Replace a cracked, chipped, or shattered pane to prevent leaks and ensure the door seals and latches correctly. What it does
This small pin secures the program selection knob to the dryer's control panel shaft. Replace if the control knob spins freely without changing settings or falls off the control panel.
THANKS TO Wendy and Hannah both were extremely helpful with this order. I receive the video from Hannah to see what the code meant and the parts (Wendy help my to get) were exactly perfect in completing my problem with my dryer. Wendy said 1 to 3 business to receive the control board and she was right. The dryer is working just great now. Thanks for all the help, I will be using your company again when the need arising again. I will tell any who will listen to me how great you are!. Read more
Replaced the water valve assembly. did not really need the dispenser part. problem mainly caused by hard water buildup where the hose connects. also replaced the hoses as they also had some hard water buildup. Read more
Control board totally burned. Replaced the control board and got my dryer working again. Read more
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.