Ffcd2413us Parts

The Door Cable is an OEM part for Frigidaire dishwashers. It is a component that connects the dishwasher door to the frame, controlling movement when accessing the tub interior.

Causes of a bad cable can be related to wear and tear over extended use, damage from faulty installation, impacts that deform the metal casing, or defects present since manufacture. Regular cycling of the door over many years places repeated stress on the cable.

Symptoms of a bad door cable: 

• Failure to open or close the door smoothly
• Lack of proper alignment
• Snapping/popping noises
• Door not sealing tightly against the gasket.

This OEM replacement part is also compatible with dishwashers made by Electrolux, Kenmore, and some KitchenAid models.

The Door Spring is an OEM part for Frigidaire dishwashers. It plays a critical role in the smooth operation of the dishwasher door, providing the necessary tension to ensure that the door opens and closes gently and securely. Without a functioning door spring, the door may drop open suddenly or be difficult to close, which can lead to potential hazards and inefficiencies in the kitchen.

Causes of a bad Door Spring can include stretching or snapping due to metal fatigue, corrosion from exposure to moisture and detergents, or improper alignment that leads to uneven wear and tear.

Symptoms of a failing Door Spring include:

• The dishwasher door feeling unusually heavy or dropping open
• A snapping sound when opening or closing the door
• Difficulty in keeping the door closed or fully open
• The door slamming shut rather than closing gently

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This base is the lower cabinet support that helps keep the appliance stable and holds internal components in their correct position. Replacing a damaged base restores proper fit, alignment and reduces cabinet movement. What it does:

• Provides structural support for the appliance cabinet and mounting points
• Keeps internal components aligned and maintains correct clearance
• Helps prevent rocking, vibration and gaps at the bottom of the cabinet
• Protects lower components from contact with floor-level debris or uneven surfaces

• Disconnect power and, if applicable, water before beginning work
• Access may require removing the toe kick or lower access panels
• Keep track of mounting screws and brackets; use replacement hardware if original fasteners are corroded

The Rail End Cap is an OEM part for Frigidaire dishwashers. This small but essential component is designed to fit at the end of the dishwasher rack rails, preventing the racks from sliding off the rails when pulled out for loading or unloading. The end caps also help to protect the dishwasher’s interior walls from scratches or damage that might occur if the metal racks were to come into direct contact with them. 

Symptoms of a failing rail end cap include:

• Dishwasher racks sliding off the rails
• Difficulty pulling racks in and out smoothly
• Noticeable damage or scratches inside the dishwasher

Causes of rail end cap damage typically involve physical stress from frequent use, accidental breakage during loading, or degradation of the material over time.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Upper Dishrack Wheel is an OEM part for Frigidaire dishwashers. This part attaches to the upper dishrack, allowing it to slide in and out smoothly along the dishwasher's tracks for easy loading and unloading of dishes.

Common causes of a bad dishrack wheel include wear and tear from frequent use, damage from heavy loads or improper handling, and breakage due to impact.

Symptoms of a bad Upper Dishrack Wheel include:

• Difficulty sliding the upper dishrack in and out
• The upper dishrack derailing or not staying on its tracks
• Unusual noises when moving the dishrack
• Visible damage or wear on the wheel

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

The Heating Element Nut is an OEM part for Frigidaire dishwashers. It plays a crucial role in securing the heating element in place, ensuring it functions effectively to heat water during the wash cycle. This component ensures the stability and proper operation of the dishwasher's heating element, contributing to the machine's overall efficiency and performance.

Causes of a bad part can include physical damage during maintenance or installation, corrosion over time due to exposure to water and detergents, or general wear and tear that affects its ability to securely hold the heating element in place.

Symptoms of a bad Heating Element Nut include:

• Loose heating element, leading to inefficient heating or water not heating at all
• Water leakage from the heating element area, potentially caused by a poor seal
• Unusual noises during the dishwasher cycle

This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Motor & Pump Assembly is an OEM part for Frigidaire dishwashers. This assembly is crucial for circulating water throughout the dishwasher during the wash and rinse cycles, ensuring that dishes are cleaned effectively.

You should replace this motor and pump assembly if it becomes faulty. Common causes of a bad motor and pump assembly include electrical issues, wear and tear from regular use, or blockages caused by debris or food particles.

Symptoms of a bad motor and pump assembly include:

• The dishwasher not cleaning dishes properly
• No water circulation during cycles
• Unusual noises such as grinding or humming from the pump area
• Error codes related to motor or pump failure

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Dishwasher Door Spring is an OEM part for Frigidaire dishwashers. It helps to balance and support the weight of the dishwasher door, allowing it to open and close smoothly and safely. The spring ensures that the door remains stable at any angle, preventing it from dropping too quickly or not staying open. This spring, 8" in length, is sold individually. 

The door spring may need to be replaced if it becomes worn out, stretched, or broken. Causes of a bad door spring can include frequent use, excessive force when opening or closing the door, and general wear and tear over time.

Symptoms of a bad dishwasher door spring include:

• The door dropping open quickly
• Difficulty in keeping the door open at various angles
• The door not closing properly
• Unusual noises when opening or closing the door

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This flapper valve is the dishwasher's one-way drain check. It directs wastewater out and helps prevent backflow into the tub, promoting complete draining and reducing standing water, odors, and water returning after the drain cycle.

• Maintains one-way water flow from the sump/pump to the drain hose
• Helps prevent backflow from the sink or air gap into the dishwasher tub
• Wear, warping, or sticking can lead to slow draining or water left in the tub
• May also present as water backing into the tub after a cycle or intermittent drain faults

• Disconnect power and turn off water supply before servicing
• Access the valve at the drain outlet/pump area; note hose and clamp orientation
• Match the original valve orientation; the flapper should open toward the drain hose (direction of flow)
• After reassembly, run a short fill-and-drain test and inspect for leaks and proper draining

The Door Hinge Kit is an OEM replacement part for Frigidaire dishwashers. Located on the left and right side of the dishwasher doorway, the hinges are responsible for supporting the weight of the dishwasher door and facilitating smooth opening and closing. The kit is composed of two brackets and all of the extra hardware needed to install it on a dryer.

Causes of failure include wear and tear of hinge parts over many door openings and closings, damage due to overload or misuse, and deterioration of hinge components exposed to moisture.

Symptoms include:

• Loose or sagging dishwasher door
• Difficulty opening or closing the door
• The door does not stay securely closed during cycles
• Noises or squeaks emanating from hinge areas

This OEM replacement is also compatible with Electrolux, Kelvinator, and some Kenmore models.

The Delivery Tube is an OEM replacement part for Frigidaire dishwashers. This tube is designed to supply water to the upper spray arm from the pump assembly. By doing so, it plays a role in ensuring that the upper rack of dishes receives adequate water coverage for effective cleaning. 

Causes for a malfunctioning Delivery Tube can include blockages from food particles or mineral deposits, general wear and tear from regular use, or damage incurred during maintenance or installation.

Symptoms of a bad Delivery Tube include:

• Inadequate cleaning of dishes on the upper rack
• Water not reaching the upper spray arm
• Unusual sounds during the wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Level Float Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It uses a floating switch design to accurately sense water levels filling and draining during cycles. Proper level detection allows for optimized wash and rinse action and water volume control.

Causes of a bad float switch assembly can include wear and tear over many years of use, interfering with free float movement. Mineral or scale deposits may accumulate on float components, inhibiting functionality. Physical damage from impact could introduce leaks.

Symptoms of a bad float switch assembly include issues such as:

• Inability to properly detect water levels
• Long fill or drain times
• Failure to fill or drain completely
• Potential overflow or standing water issues
• Error codes pointing to level sensor faults

This OEM Frigidaire replacement part is also compatible with some Electrolux, Westinghouse, and Kenmore dishwashers.

The Dishrack Roller Assembly is an OEM component specifically designed for Frigidaire dishwashers. It consists of precision ball bearing rollers that allow smooth extension and retraction of the lower dishrack.

Symptoms of a bad roller assembly include:

• The lower rack getting stuck and not fully extending or retracting 
• Scratching or grinding noises coming from the roller area
• Difficulty accessing the lower rack due to poor movement

Causes can be general wear and tear over time, an incident that damaged the rollers, or a malfunction of the guiding mechanisms.

This OEM Frigidaire replacement part is also compatible with some Electrolux, Gibson, and Kenmore models.

The Silverware Basket is an OEM replacement part for Frigidaire dishwashers. It holds and protects silverware during the dishwashing cycle. The basket is designed to fit seamlessly within the dishwasher, providing a convenient and accessible storage solution for silverware.

Causes of a bad silverware basket can include wear and tear over time, damage to the basket or its components due to mishandling or impact or exposure to harsh detergents or chemicals

Symptoms of a bad silverware basket:

• Rust or corrosion
• Difficulty loading or unloading silverware
• Silverware falling out of the basket during the wash cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.

The Electronic Control Board is an OEM replacement part designed for Frigidaire dishwashers. It houses the integrated circuitry that monitors and directs all functions of the dishwasher like temperature, cycles, sensors, and component operation.

Symptoms of a bad electronic control board include:

• Cycles failing to start or not advancing properly
• Lights and displays not illuminating or responding as expected
• Inconsistent or no heat during the drying part of cycles
• Unusual noises or vibrations coming from internal components

Causes of a bad board can be moisture exposure damaging circuits, power surges disrupting chip performance, or natural component degradation over extended use.

This OEM Frigidaire control board is also compatible with models produced under the Electrolux, Gibson, Kelvinator, and Kenmore brands.

The Kickplate Assembly is an OEM replacement part for Frigidaire dishwashers. It forms the bottom protective barrier that prevents damage from kick impacts during loading and unloading.

Causes of a bad kickplate can include cracks or fractures from repeated contact, broken mounting clips, or detachment from normal wear over time.  

Symptoms of a bad kickplate assembly include:

• Compromised protection of internal tub components  
• Exposed wires or mounting hardware pose a safety hazard
• Mounting clips or hinges that become detached

This OEM part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.