Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Rotating spray arm that distributes water across dishes during wash cycles. Replace if cracked, split, or ports are clogged to restore proper coverage.
After reading reviews, I went ahead and ordered the complete sprayer arm with the orbital sprayer and the bottom door gasket. It fixed the problem ! So I’m not sure which was needing replaced but I didn’t want to have to wait longer if I needed the other part so I replaced them all that could be causing the problem. The only problem with the whole experience is that 3 plastic pieces should not cost $180 !! Read more
Secures the lower spray arm in place. Replace if tabs are broken, worn, or missing, causing the spray arm to detach or not lock down properly. Installs under filter.
Replace the sprayer in the middle of the dishwasher, the problem was the grommet on the back of it but it's not available individually. Read more
If water remains in your dishwasher after draining or returns to the tub, the drain check valve may have failed. Easy 10-30 minute DIY repair.
After inspecting screen and drain hose with no obvious cause, replaced drain pump. Removal of the pump was very straight forward. 3 screws, 2 electric connections, and 1 hose clamp was all that was needed. Read more
Dishwasher won't fill with water? A faulty water level float switch prevents proper filling. This switch assembly typically takes 15 minutes to replace.
Replacing the inlet valve solved the problem. The old valve was somehow clogged with white sediment. I probably could have taken it off and cleaned it out if I'd known, but replacing the valve was much easier. Took about half an hour to repair. Video walk through was extremely helpful. Great to have a working dishwasher again! Read more
The Switch Assembly is an OEM replacement part for Frigidaire dishwashers. It contains a touchpad and electronic controls that operate wash cycles and drying features. Causes of a faulty switch assembly can involve water exposure inside the door control area leading to circuitry corrosion over time. Symptoms of a bad switch assembly include:
This OEM Frigidaire replacement part is also compatible with dishwashers manufactured by Electrolux, Gibson, Kelvinator, and some Kenmore models.
Replaced switch pad Read more
Seals the upper spray arm delivery tube connection in your dishwasher. Replace if water leaks from the spray arm mount or arm becomes loose. Verify fit.
Replaced the upper spray arm tube with a new one. Also replaced delivery tube grommet and the delivery tube gasket. Now everything works fine and no more leaks. Read more
Replacement bracket that secures the fold-down fence to your dishwasher's upper or lower rack. Needed when original is broken, rusted, or missing.
Purchase new rack assembly, fences and brackets from Appliance Parts Pros. This was my first purchase from Appliance Parts Pros and was an excellent experience. Went to their web site. Put in my model number. Purchased these parts in which I received in two days. Put together fences. Problem solved. Read more
Bottom protective panel that installs beneath the dishwasher door. Replaces cracked, dented, broken, or missing kickplates from impact damage or wear.
Easy job, I screwed the parts to the dishwasher Read more
Replacement water inlet hose for dishwashers. Connects water supply to the tub. Replace if cracked, leaking, or damaged by pests or wear.
Replaced hose Read more
Covers the gap beneath your dishwasher for a finished look. Replace if cracked, broken, or missing. Installs at base with screws (sold separately).
Took off the old and installed the new ones. Read more
Lower spray arm distributes water beneath dishes on the bottom rack. Replace if cracked, broken, or missing to restore proper dish coverage.
Removed broken arm and snaped new one in place. Read more
Seals the rear of your dishwasher's circulation pump to prevent leaks. Replace if you notice water pooling or dripping from the motor area.
I first thought the leak came from the pump assembly rear o ring. I was wrong. The water was leaking from the pump. The pump assembly was shipped in 1 1/2 days with 2 more o rings. I lubed the o rings with dish soap, they slid in perfectly. reinstalled the clamp and screws and was ready to reinstall the dishwasher. Worked great. Next time I will buy the pump the first time. Buying the o rings separately adds $$. Read more
Noticeable wear, cracks, or deformation on the O-ring This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Secures the kickplate toe panel at the bottom of your dishwasher. Replace if screw is stripped, missing, or damaged during kickplate removal or repairs.
Holds and stabilizes the spray arm assembly so it sits level and secure. Replace if cracked, broken, or worn to restore proper alignment in your dishwasher.
Replaced dishwasher spray arm, spray arm support plate, dishwasher drain trap filter assembly. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.