Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix loud whining or grinding noises during wash cycles with this dishwasher circulation pump motor. DIY-friendly repair, typically 10-15 minutes.
I started looking at new dishwashers and was quickly disheartened with the cost of these simple machines. There's really not much to them and yet they're so much money for what they do. I popped off the pump and took a look at it and cleared some "gunk" and hair out but it didn't fix the issue. Jumped on AppliandPartsPros.com and ordered the pump on a Friday night and had the part in hand Tuesday night after work. Took about 10 minutes total (dishwasher out and back installed, literally in... Read more
Fix a dishwasher that stops mid-cycle, overheats, or won't heat water. This thermostat regulates temperature during wash cycles. Moderate DIY repair.
So I replaced the hi-temp thermostat and the problem is fixed. Read more
Holds and stabilizes the spray arm assembly so it sits level and secure. Replace if cracked, broken, or worn to restore proper alignment in your dishwasher.
Replaced dishwasher spray arm, spray arm support plate, dishwasher drain trap filter assembly. Read more
Secures the fold-down tine row to your dishwasher rack so it pivots and locks correctly. Replace this bracket if cracked, broken, or missing to restore stable plate support.
Purchased part watched the video and then did the job The parts arrived quickly and fit perfectly . Read more
Dishwasher not filling with water or showing i20 error? The water inlet valve controls water flow into your dishwasher. DIY repair in under an hour.
Replaced the water inlet valve. Read more
Fix i20 or i30 error codes with this dishwasher pressure sensor. Monitors water pressure to prevent overfilling. Common DIY repair for continuous filling.
I had to pull and clean the pressure sensor switch four times in a year. Each time more gunk accumulated. When that happens the sensor does not close the water valve. The dishawsher keeps filling and the water comes out through the overfill port. The water then goes in the catch basin under the washer and floats the emergency switch. This cuts off the water but keeps the pump running just in case. Tripping the circuit breaker is only a temp fix. What happens is the water level may have... Read more
The orbital sprayer mounts to the spray arm assembly to enhance water coverage during wash cycles. Replace if cracked, shattered, or broken off the arm.
Simply a press in part, took about 45 seconds. Read more
This roller assembly mounts to the bottom of a dishwasher dishrack and allows it to slide in and out of the tub smoothly. It typically includes the roller wheel, axle, and mounting clip. Replace this part if the dishrack is difficult to pull out, rolls unevenly, or if the roller is cracked, worn, or has fallen off the track.
Two years ago replaced all four roller assemblies of affected side. Problem recently reoccured on the opposite side. Replaced all four roller assemblies on that side. Entire repair took about twenty minutes. Read more
Fix a soap door that won't open or stay closed. This detergent dispenser releases soap at the right time during wash cycles. DIY-friendly repair.
Started with a YouTube video, then this site. Between the two, fixed in about a half an hour. Read more
Fix unresponsive buttons or a blank display with a new dishwasher control panel. Contains touchpad and controls for cycle selection and settings.
Replaced control panel assembly Read more
Fix a dishwasher that won't start, displays error codes, or has no response to buttons. This control board manages all dishwasher functions and cycles.
New parts. Read more
Fix water leaking from your dishwasher or overfilling issues. This float assembly monitors water levels to prevent overflow and flooding damage.
Dishwasher door seal prevents leaks by creating a watertight barrier around the door. Replace if you notice water pooling or leaking. Verify fit with your model.
Fix dishwasher drainage issues with this sump cover and filter. Screens debris from clogging drain lines. Easy DIY repair in 5-15 minutes with basic tools.
I followed the video instructions that is on the website and was able to replace the motor easily and in 15 minutes maybe less. Read more
Dishwasher spray arm distributes water during wash cycles. Replace if cracked, broken, clogged, or worn. Installs in dishwasher tub center position.
This metal mounting bracket secures the circulation pump motor inside the dishwasher. It holds the pump assembly firmly in place to prevent vibration and ensure proper alignment with the wash system. Replace this bracket if it is cracked, bent, or corroded, which can cause excessive noise, vibration, or misalignment of the pump during wash cycles.
Bought combination set Motor & pump/ pump assembly plus new thermostat/ bracket. Exchanging motor and pump took about 15-30 min. Getting the dishwasher out and back took at least 30 min plus each way. Online video helped a great deal Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.