Need Help?
Call
Grease filter for range hoods and over-the-range microwaves. Dimensions: 5-7/8" x 7-7/8" x 3/32" (5.875 x 7.875 x 0.09375). Rectangle shape. Captures grease from cooking air. Replace when clogged, discolored, or every 6-12 months.
Just installed it to the wall & presto... Read more
Microwave won't start or light stays on when door closes? A faulty door latch prevents proper switch engagement. DIY repair typically takes 15-20 minutes.
With parts from you my son repaired the door and now microwave is operating perfect.,.... A 10 minute job for him!... Thanks for not having to buy a new one!!!!! Read more
The Door Switch is an OEM replacement part for Frigidaire wall ovens. It is a component located on the oven door that detects when the door is opened and closed. The door switch works alongside the control board to regulate oven operations based on door position.
Symptoms of a bad door switch can include:
Causes relate to normal wear over extended use as the door switch mechanism cycles with frequent door openings and closings. Moisture exposure or impacts could also degrade switch performance.
This OEM Frigidaire switch is compatible with Amana, Jenn-Air, KitchenAid, and some Electrolux wall oven models as well.
I diagnosed this problem via the web and the advice was spot on. The problem was a failure of the bottom door switch. I used a multimeter to verify that the switched never closed properly. It took me a minute to figure out how to remove the old switch (press a release tab under the switch while simultaneously rotating counter-clockwise). That was about the most difficult part of the repair. Read more
Charcoal air filter captures grease, smoke, and odors in over-the-range microwaves. Replace when performance declines. Confirm fit with your model number.
Ordered a new one online. Was easy and delivered earlier than expected. I changed it myself Read more
Restores interior and cooktop lighting in your microwave. Replace when bulb burns out or dims for clear visibility. Verify fit with your model number.
I replaced the bulbs in my over stove microwave light. Read more
Replacement spring for microwave door latch mechanism. Restores return tension so the latch engages and releases correctly. Needed when spring is broken or worn.
This replacement motor restores reliable rotation to the component it drives—bringing back proper airflow or mechanical movement so your appliance runs as designed and noise is minimized.
Start bye removing the three screws that hold the underside of the microwave up. Once those are undone, the panel pivots down. You then need to un-attach the lights so the panel will totally come off and out of the way. The motor is plainly visible. Remove the power plug and remove the one screw then it twists out of its slot. Install the new motor and reverse the directions. Read more
Replace a cracked, broken, or missing microwave door handle. Restores secure grip for opening and closing. Requires removing inner door panel to access screws.
Had to remove door ,take door apart to get to screws that hold handle on , was a little harder then I first thought , but got it done , save lots of money from not calling repair man , service calls around here are around 100 dollars plus parts Read more
Microwave not heating but humming loudly? A failed high-voltage diode is often the cause. This rectifier converts AC to DC for the magnetron circuit.
We had a problem with the magnetron a few years ago while it was still under warranty so they sent me a new magnetron but when the repairman showed up he had a new one also and said just keep it as a spare (no charge). It's an over-the-range microwave so taking it down takes a little bit of an effort, cumbersome more than anything. Got it down to my work bench, took off the housing, checked to make sure the capacitor was discharged, removed the capacitor (diode is attached to it) and... Read more
This is a high voltage capacitor used in the microwave's magnetron circuit. It stores and releases electrical energy to help power the magnetron, which generates the microwaves that heat food. Replace this capacitor if the microwave runs but does not heat, hums loudly without cooking, or if the capacitor has visibly bulged or leaked. Always discharge the capacitor before handling, as it can retain a dangerous charge even when unplugged.
Replaced the magnetron and high voltage capacitor. I tried replacing only the diode (rectifier) first with no luck. I hope this is helpful. Read more
Secures your microwave to the wall or cabinet during installation. Replace this bracket if the original was lost, damaged, or missing during remodeling.
Microwave not heating but runs normally? A failed magnetron is the likely cause. This repair restores heating function. Moderate DIY difficulty.
After checking on the internet for the probable causes of the noise in my microwave and confirming the diagnosis by listening to where the noise was coming from, I decided to replace the magnetron. A few days later, the part from AppliancePartsPros.com was delivered to my door. I've never repaired a microwave before, but it wasn't too difficult; I just kept removing parts until I could get to the one I was looking for. After buttoning everything back up, the oven worked perfectly. And only 2... Read more
Replacement mounting screw that secures panels, trim, and internal components in microwaves and wall ovens. Needed when screws are stripped, missing, or lost.
Microwave won't turn on, made popping noise, or smells like burned electrical? The noise filter often fails when solder joints arc or short out.
When using the microwave it made a frying sound and completely stopped working. Took cover off (after unplugging) and found filter coil solder joints fried. Took a chance on replacing filter. Works perfectly now. Looking at the solder joints again, under magnification, discovered they were not done properly in the first place. Use caution with cover off, there is a capacitor near the filter that could prove dangerous. Also need tamper proof torx bit to remove 2 of the cover screws, or small... Read more
This is a black plastic lens and frame assembly that covers the interior lamp on a microwave oven. It protects the light bulb from grease and moisture while diffusing light inside the cooking cavity. Replace this lens if it is cracked, yellowed, melted, or missing, which can leave the bulb exposed to splatter and reduce interior illumination.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.