Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Isolates the evaporator fan motor from its bracket to reduce vibration and noise. Replace if worn, cracked, or missing to keep the motor secure.
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest... Read more
Fastens the auger shaft in your refrigerator's ice maker assembly. Replace if cracked, broken, or missing to secure the auger and prevent rubbing.
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke. Read more
Collects water from evaporator defrost cycles. Mounts near compressor under refrigerator. Replace if cracked, leaking, or damaged to prevent odors.
Previously, I removed the lower rear cardboard back of the unit and saw the crack in the defrost pan. It was probably damaged when unit was moved using appliance hand truck. I looked up the part number AP4319611 in the exploded view diagrams of the unit. The part was ordered and delivered in a few short days. Emptied the unit and removed all shelves/glass to avoid damage since the unit must be tilted enough to reach under and remove two 1/4 inch hex screws. Tilted to the right side (facing... Read more
Ice won't dispense or bin is cracked? This ice container assembly stores ice and feeds the dispenser. Easy slide-in replacement—most installs in minutes.
Just slid the old one out and slid the new assembly in! Read more
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly. Read more
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
Ice won't dispense or grinds loudly? A bent or worn crusher blade is often the culprit. This blade fits inside the ice bucket assembly. Easy DIY fix.
I ordered (3) new replacement blades and received them in two days! Read more
Ice won't dispense or jams in crushed mode? This crusher blade fixes bent or broken blades in your ice bucket assembly. Easy DIY repair with video guide.
Ice maker clicking or not producing ice? A worn drive gear with stripped teeth is often the cause. This 5-minute fix restores normal ice production.
Replaced the gear. Now it's making ice again. Perfect. Read more
Supports the freezer door on the hinge pin for smooth opening and alignment. Replace if worn, cracked, or missing to stop door sagging or scraping.
I called Appliance Parts Pro told them what I needed it and the model of the refrigerator. They told me exactly what I needed and also made suggestions to make sure I had enough parts to accomplish the task. Read more
Adjustable humidity control slider for refrigerator crisper drawer covers. Replaces cracked, broken, or missing controls to restore smooth vent operation.
This was a simple replacement of the crisper drawer and humidity control sliding switch; easy to snap into place and align with the tracks. Read more
Secures panels, brackets, and handles in refrigerators and other appliances. Replace missing or stripped screws to restore secure mounting.
Ordered the screws needed from your website and put the doors back on the frig. Read more
Supports and aligns the refrigerator door at the hinge pivot point. Replace if cracked, bent, or worn to restore stable door operation and proper sealing.
Secures the water filter housing to your refrigerator liner for proper alignment and sealing. Replace if cracked, loose, or causing leaks. Verify fit.
Installed new one. Works Great Read more
Secures the crisper cover slide for smooth, aligned operation. Replace if broken or missing to restore proper drawer function. Confirm fit with your model.
Shelving went in without a problem. Very simple. Checked the installation video anyway in case there was a trick to not breaking something. Learned that the nylon clips needed to be transferred and found one missing on another shelf, so ordered a replacement. The water valve was one I replaced some time ago but one of the solenoids was bad, confirmed with a meter (ohm reading is between 200-500; less than 200 or more than 500 is broken). Replaced it without a problem (becoming expert at... Read more
Specs: Hex head ,1/4-20 x 5/8
My 10 year old frig door was hanging down to the point it wasnt fully closing and sealing unless you picked up on it. I ordered a lower hinge bracket, upper and lower bearing, and spacer. My bracket was bent down a little due to my kids hanging on the door when looking at the bottom shelf and i discovered my bracket was held on by only two bolts when there was supposed to be three. I ordered a bolt too. I was able to remove the bottom hinge, remove door to replace upper and lower bearing and... Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.