Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Nylon washer for the evaporator fan motor shaft in refrigerators. Replace if worn, cracked, or missing to ensure proper fan alignment and operation.
Walk into the kitchen on 21 Sep. Eight year old Frigidaire refrigerator appears to be short cycling, controls are nonfunctional. Unplug it for a few minutes, plug it back in, appears to return to normal function. Return to kitchen half hour 45 minutes later it's short cycling again. Panel has codes on it (S or 5 E CE, later that changes to S or 5 Y CE). Research of codes says replace main board and control board. Not sure where this main board is. 22 Sep call appliance repair. "Soonest... Read more
Fix refrigerator lights that won't turn on when door opens. This door light switch is a simple snap-in replacement. Easy 10-minute DIY repair.
Switch replacement was easy: -unplug fridge -using medium flathead, pry out old switch, starting from back, be gentle it's all plastic -when switch pops out, grab the wires and don't let them fall back into hold -there should be three wires -connect to new switch in same pattern -push new switch back in, being careful to orient it correctly while replacing the freezer switch, i noticed that one of the wires had loosened up and detacted from the old switch anyway, which was probably the actual... Read more
Plastic drip tray installs under the refrigerator water/ice dispenser to catch spills and drips. Replace if cracked, warped, discolored, or missing.
I removed the old one and put the new one in. It took about 1 minute. That is because I am counting the time it took from opening the package, removing the old dip tray and replace it with the new one Read more
Spacer that maintains proper gap between fixed crusher blades in the ice bucket. Replace if broken, cracked, or missing to restore correct alignment.
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke. Read more
Insulated cardboard cover assembly that installs on the rear bottom of your refrigerator. Replaces a cracked, torn, or missing original cover.
Ordered all the parts I needed to finish off a Craigslist purchase that had some cosmetic and function items missing. Thanks for all the parts at great prices! Read more
Replaces a cracked, broken, or worn ice dispenser lever on your refrigerator freezer door. Press this actuator with your glass to release ice.
A friend's ice dispenser was not working so I told them I'd see what I could find on the forum. Originally I thought the micro switch had gone out. When I received the part and went to replace it I found that the little plastic tab that engages the micro switch was actually broken off on the Ice Actuator. I returned the switch and got the correct part. It arrived in a couple of days. It took about 15 minutes to replace. Everything is working great now. The repair was pretty easy to do. I found... Read more
Replacement actuator arms for refrigerator ice and water dispensers. Includes both paddles. Needed when arms are broken, cracked, or missing.
Took water and ice panel apart and replaced actuator with new one. took about 15 minutes. very easy fix! Read more
Replace cracked or peeling dispenser cover label. Easy DIY fix—peels off like a sticker, alcohol wipe surface, press new label on. 10-minute repair.
Removed old label, took the glue residue off, wiped it down with rubbing alcohol then attached the new label on to the fridge. Read more
Limits how far the refrigerator door swings open. Replace this stop if it's worn, broken, or missing to protect the hinge and prevent door overextension.
The plastic bearing broke after 7 years of too much opening and closing. Removing original bears were not real easy, however installing new ones were quick. It works well. The parts arrived really quickly. Read more
Isolates the evaporator fan motor from its bracket to reduce vibration and noise. Replace if worn, cracked, or missing to keep the motor secure.
Ice won't dispense or grinds loudly? A bent or worn crusher blade is often the culprit. This blade fits inside the ice bucket assembly. Easy DIY fix.
This is the second time of needing repair. I remove the ice bucket, open the crusher, remove the 5 blades. Straighten the blades, reinstall. I then order new blades, The next time it happens I will install the new blades. The reason for the malfunction, (my guess), two ice cubes partially melted stick together and the size and angel the enter crusher cause the problem. I don't see it as the crusher problem or the blades being to weak. The ice container gets over full, opening and closing the... Read more
White touch-up paint for refrigerators and appliances. Covers scratches, chips, and minor cosmetic damage on exterior surfaces. 0.6 fl oz bottle.
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
Collects water from evaporator defrost cycles. Mounts near compressor under refrigerator. Replace if cracked, leaking, or damaged to prevent odors.
Previously, I removed the lower rear cardboard back of the unit and saw the crack in the defrost pan. It was probably damaged when unit was moved using appliance hand truck. I looked up the part number AP4319611 in the exploded view diagrams of the unit. The part was ordered and delivered in a few short days. Emptied the unit and removed all shelves/glass to avoid damage since the unit must be tilted enough to reach under and remove two 1/4 inch hex screws. Tilted to the right side (facing... Read more
Replacement mounting screw for securing brackets, trims, covers, and components inside your refrigerator. Replace missing, stripped, or lost hardware.
I ordered online to AppliancePartPros.com for the fridge door hinge and after quick delivery I spent 15 minutes to securely fit the door back on the frig. I'm sure to do business again for parts if needed. Read more
Replace your refrigerator's water filter cup if cracked, leaking, or frozen. Protects the filter and prevents leaks. Verify fit with your model number.
Replaced cup & housing Read more
Supports and guides the refrigerator door as it pivots, reducing friction. Replace if cracked, worn, or causing metal shavings to restore smooth operation.
Discovered that the old part had broken, preventing the door from leveraging closed into the bearing valley. Metal-on-metal rubbing was also a clue. Pulled the old piece out of the hole (only the shaft remained) and popped in the new bearing. Took all of 10 minutes, and everything works great now. Read more