Fws1233fs1115vac60hz10amts Parts
Genuine Whirlpool part
By: Whirlpool
Part Number: W10135699
The Affresh Washer Cleaner 3 Pack is an OEM cleaning accessory designed specifically for washing machines. This multipack contains 3 packets of a proven formula that helps eliminate odors from the washer tub, door, gasket, and drain areas. Regular cleaning is important to remove dirt, soap scum, mildew, and other residue that can build up over time and lead to odors. The Affresh tablets contain oxygen-powered enzymes and fresh scent boosters that are released during the cleaning cycle to safely and effectively eliminate musty smells.
This multipack of Green 4.2-ounce tablets ensures you have enough doses for consistent cleaning to keep your washer smelling fresh. As the #1 recommended washer cleaner brand, Affresh is also compatible for use in Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.
More
Genuine Frigidaire part
By: Frigidaire
Part Number: 137221600
The Frigidaire Drain Pump is an OEM part for Frigidaire washing machines. It plays a crucial role in the washer's operation by removing water from the wash tub at the end of each cycle, ensuring your clothes are properly drained before the spin cycle.
Causes of a bad drain pump can include blockages from debris such as coins, lint, or small items that escape from clothing, as well as motor or impeller damage. Electrical failures can also impair pump function, leading to inadequate water removal.
Symptoms of a bad Frigidaire Drain Pump include:
- Water not draining completely from the washer
- Unusual noises, like humming or buzzing, indicating the pump is struggling
- Washer stopping mid-cycle
- Water pooling around the base of the machine
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
My front loading washing machine would not drain. Meryl L. • Fort Thomas , AZ • October 26, 2020
So, Saturday, the washer wouldn't drain, yes, I tried the Drain/Spin cycle. So I took the clothes out, rinsed them out twice in the laundry sink and dried them. After a quick Google search, I came to the conclusion that the pump was bad and ordered a pump, $125.
Over the course of the next four days, expecting the new pump on Thursday, I baled out the washer, pulled it out from the wall and propped up the front (it's HEAVY), removed the front access panel, removed the drain inlet and outlet...
Read more
More
$152.95
- Compare At:
-
$183.54
- You Save:
-
$30.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 134511600
The Washer Drive Belt is an OEM part for Frigidaire washing machines. This belt connects the motor to the drum, enabling the drum to rotate during the wash and spin cycles. It ensures the proper transfer of power from the motor to the drum, allowing the washer to agitate and spin effectively.
Common causes of a bad drive belt include normal wear and tear, overloading the washer, or a misaligned drum that puts extra strain on the belt.
Symptoms of a bad washer drive belt include:
- The washer drum not spinning or agitating
- A burning smell during operation
- Unusual noises such as squealing or grinding
- The washer stopping mid-cycle
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Spins slowly
-
Burning smell
-
Pumps but will not spin
-
Will not agitate
See more...
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
$20.95
- Compare At:
-
$24.93
- You Save:
-
$3.98
Genuine Frigidaire part
By: Frigidaire
Part Number: 134844410
The Selector Knob is an OEM part for Frigidaire appliances designed for use on various models of washers and dryers. This knob enables users to select different cycles and settings, providing essential control over the appliance's operations.
Symptoms of a failing selector knob include:
- The knob failing to engage or change settings
- Difficulty in turning or a lack of resistance
- Visual signs of wear such as cracks or breakage
Causes of selector knob deterioration typically involve continuous mechanical use, accidental impacts, or exposure to harsh environmental conditions that can weaken the plastic.
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
This part fixes the following symptoms
-
Won't start
-
Touchpad does not respond
See more...
Do-It-Yourself Stories from Customers like You
Dryer knob was broken Karen H. • League City , TX • July 01, 2014
Replaced old knob with new knob
Read more
More
$51.23
- Compare At:
-
$61.48
- You Save:
-
$10.25
Genuine Frigidaire part
By: Frigidaire
Part Number: 131605901
The Agitator is an OEM replacement part for Frigidaire washing machines. This component is responsible for moving clothes during the wash cycle, ensuring that water and detergent are evenly distributed for effective cleaning. The agitator's motion helps to loosen dirt and stains from fabrics. The agitator measures approximately 17" tall
Causes of a bad agitator can include wear and tear over time, damage from washing heavy or unbalanced loads, or issues with the agitator’s internal mechanisms that reduce its efficiency.
Symptoms of a bad Agitator include:
- Clothes not getting properly cleaned
- The washing machine making unusual noises during the wash cycle
- The agitator not moving or moving erratically
- Visible damage or cracks on the agitator
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Broken fins on agitator Annetta H. • Crane , MO • September 23, 2014
This was a fairly easy fix. The only problem I had was that the cover over the retaining nut was difficult to pull off. I changed to a larger pair of pliers and put a little more muscle to it and it popped right out. There was a little corrosion on the shaft that needed to scraped off for the new agitator to slide on easily but after that was gone the new part slid on and with some downward pressure it seated in.
Read more
More
$118.53
- Compare At:
-
$141.05
- You Save:
-
$22.52
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204405
The Spin Bearing is an OEM part for Frigidaire washing machines, specifically designed to facilitate the smooth and efficient rotation of the washer drum. This bearing plays a pivotal role in the operation of your washing machine, allowing the drum to spin freely with minimal friction and noise.
Causes for replacement may include wear and tear from regular use, water damage leading to rust or corrosion, or physical damage from excessive load sizes.
Symptoms of a bad Spin Bearing include:
- Loud noises during the spin cycle, often described as grinding or rumbling
- The drum struggling to spin or not spinning as smoothly as it should
- A noticeable decrease in washing performance due to the drum's impaired movement
This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore gas ranges.
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
$75.21
- Compare At:
-
$89.50
- You Save:
-
$14.29
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308002401
The Spin Bearing Washer is an OEM part for Frigidaire washing machines. Situated inside the transmission housing, this thin metal washer acts as a subsurface support for the belt pulley bearing. The spin-bearing washer facilitates smooth, balanced rotation essential for agitated and spun wash cycles.
Causes of a bad spin-bearing washer include wear and fatigue from years of successive rotations, potentially allowing excessive movement between housing components.
Symptoms of a bad spin-bearing washer involve:
- Vibration or shaking noises coming from inside the washer cabinet
- Belt slippage wasting energy by inefficiently spinning loads
- Increased friction resulting in longer cycle times for spins
- Failure of belts or other components from unsupported bearing
This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
Do-It-Yourself Stories from Customers like You
Noisey bearing on spin cycle Neal G. • Klamath Falls , OR • February 14, 2016
I replaced the spin bearing, tub seal, washer and drive belt since I had it all apart. The video was extremely helpful...I would have tore the whole thing apart trying to figure out how the agitator came off....but it was very simple.
Read more
More
$11.95
- Compare At:
-
$14.22
- You Save:
-
$2.27
Genuine Frigidaire part
By: Frigidaire
Part Number: 134592700
The Drain Hose is an OEM part for Frigidaire washing machines. This hose is essential for directing used water out of the washing machine and into the household drain system, ensuring efficient water removal after each wash cycle.
You should replace the drain hose if it becomes damaged or clogged. Causes of a bad drain hose include wear and tear from repeated use, blockages from debris or lint, or physical damage such as cracks or splits. A compromised drain hose can lead to water leakage, improper drainage, or even flooding.
Symptoms of a bad Drain Hose include:
- Water not draining properly from the washing machine
- Leaks or puddles of water around the washing machine
- Visible cracks or splits in the hose
- Unusual sounds during the draining process
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Washer drain hose split in half Will W. • Steele , AL • April 19, 2014
Our washer is next door the bathroom. So when, during the rinse cycle, the hose split and we found the back of the house completely flooded I initially assumed the culprit was either the toilet or the sink or possibly an interdimentional portal into a demonic netherworld of vaguely chlorine scented water. I spent the next hour mopping it all up and checking and re-checking the pipes in the bathroom with no apparent leaks. The next load of laundry left more clues as this time the flood was from...
Read more
More
$68.95
- Compare At:
-
$81.36
- You Save:
-
$12.41
Genuine Frigidaire part
By: Frigidaire
Part Number: 131168200
This factory 8-18 screw secures appliance panels, brackets, and components. Replace missing or stripped hardware to restore a tight, rattle-free assembly and dependable operation.
- Fastens components to frames, brackets, and covers
- Replaces missing, damaged, or rusted screws
- Helps reduce looseness, vibration, and rattling noises
- Restores proper alignment of panels and assemblies
What's included: One screw
- Disconnect power before servicing; shut off gas/water if applicable
- Start the screw by hand to avoid cross-threading; use the proper driver
- Tighten snugly—do not overtighten to prevent stripping metal or plastic
Do-It-Yourself Stories from Customers like You
Grill on air duct had an item melt on to it and partially block air flow Charles C. • Orchard Park , NY • November 25, 2017
It was easy to find the part on appliance parts pros. Once I found it I studied the diagram and determined that there were 3 screws in the drum that needed to be removed. I disconnected power and then removed 3 interior screws. Once I did that I removed the back cover and removed the single screw on the bottom side of the air duct that held it in place connected to the heat tube.
I then reversed disassembly. I want to tell you this is a 2 person job. In order to assemble it you need to...
Read more
More
$19.95
- Compare At:
-
$23.94
- You Save:
-
$3.99
Genuine Frigidaire part
By: Frigidaire
Part Number: 134548800
The Leveling Leg is an OEM part for Frigidaire washers. It is designed to provide stability and level the appliance properly on the floor during installation and operation.
Common causes for needing to replace the leveling leg include damage or wear over time, which can lead to unevenness and excessive vibration during wash cycles.
Symptoms that may indicate the need for a replacement leveling leg:
- Uneven or unstable washing machine
- Excessive shaking or vibration during spin cycles
- Difficulty in leveling the washer during installation
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Water leak under tub Hector D. • Lubbock , TX • December 07, 2014
After watching YouTube videos on possible cause, went to appliancepartspros and order seal and leveling legs since the had been missing since machne was given to us. Parts came in within the week and replaced . No more leaks!!
Read more
More
$20.45
- Compare At:
-
$24.34
- You Save:
-
$3.89
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304488479
This factory clamp secures a hose or tubing connection so it stays tight during normal operation. Replace a worn or rusted clamp to restore a firm hold and help prevent leaks, drips, or accidental disconnections.
- Holds a hose, tube, or duct firmly to its fitting
- Helps maintain a sealed connection under vibration
- Helps resolve loose connections, drips/moisture at a joint, or rattling noises
- Common wear includes loss of tension, corrosion, or visible damage
What's included: 1 clamp Install notes:
- Disconnect power; if servicing a water line, shut off the water supply
- Note the original clamp position and orientation before removal
- Use appropriate hand tools (pliers, screwdriver, or nut driver as applicable)
- After installation, test for leaks or movement
Do-It-Yourself Stories from Customers like You
Fan making banging sound in housing Keith N. • Kaukauna , WI • April 25, 2015
The blower wheel center was worn down and spinning freely on shaft. Removing front covers, controls and brackets gave access to blower, which front half came off removing screws. (One screw underneath bracket) Pushed new blower on. (It's keyed and has small tabs that line up with groove on shaft). Installed clamp, reassembled and tested. Don't forget to pull the plug out before working on any appliance.
Read more
More
$14.95
- Compare At:
-
$17.79
- You Save:
-
$2.84
Genuine Frigidaire part
By: Frigidaire
Part Number: 131212301
The Capacitor is an OEM part for Frigidaire washing machines. This part stores and releases electrical energy to start and maintain the operation of the washer's motor, ensuring it runs smoothly during wash and spin cycles.
Causes of a bad capacitor can include electrical surges, general wear and tear over time, or exposure to high temperatures and moisture.
Symptoms of a bad capacitor include:
- The washer not starting or having difficulty starting
- The motor running intermittently or not running at all
- Unusual humming or buzzing noises from the washer
- The washer stopping mid-cycle or not completing cycles
This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Top loading washer would not agitate or spin h20 out after a clicking noise; the motor wouldn't engage or would start & then stop finally figured that it was the motor &/or capacitor Susan S. • Pelkie , MI • October 31, 2014
I found your site which was most helpful. I saw on your forum, that others had replaced a motor & capacitor with + results. I was willing to spend what I thought was a reasonable amount & your guarantee was the clincher. I knew that if I called the appliance store where we had purchased the washer in 1998, it would be very expensive & even more important, it would take many days as they would have to order the part & then schedule a service call. I installed the motor & capacitor & was...
Read more
More
$15.50
- Compare At:
-
$18.45
- You Save:
-
$2.95
Genuine Frigidaire part
By: Frigidaire
Part Number: 131302800
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
- Fastens the drum baffle/lifter (vane) to the rotating drum
- Helps maintain proper tumble and load turnover
- Common symptoms: loose or wobbly baffle, rattling or clunking noises, items catching on a raised baffle edge, or a baffle that detaches
- Visual cues: missing screw or stripped/damaged threads at the baffle mounting holes
What's included: One screw
- Disconnect power before servicing; shut off gas
- Access the baffle from inside the drum; align holes and start the screw by hand to avoid cross-threading
- Tighten firmly but do not overtighten to prevent stripping the drum or cracking the baffle
- Start all screws before final tightening to seat the baffle evenly
Do-It-Yourself Stories from Customers like You
The pump hose had a tear in it and the water hoses were in bad shape Steven V. • El Cerrito , CA • September 21, 2014
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy
Read more
More
$17.95
- Compare At:
-
$21.54
- You Save:
-
$3.59
Genuine Frigidaire part
By: Frigidaire
Part Number: 134159500
The Drive Motor is an OEM part for Frigidaire washing machines. This component is essential for powering the washing machine's drum, enabling it to agitate and spin during the wash and rinse cycles. It ensures that clothes are thoroughly cleaned and properly spun dry.
Common causes of a bad drive motor include wear and tear from frequent use, overheating due to heavy loads, electrical issues such as power surges, and physical damage from impact or mishandling.
Symptoms of a bad drive motor include:
- The washing machine not spinning or agitating
- Loud, unusual noises during operation
- The washer not starting or stopping mid-cycle
- Burning smell or visible signs of motor overheating
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
Motor died on washer Timothy P. • Los Angeles , CA • July 27, 2014
I took the easy fix first and replaced the Capacitor. That got me three loads before the motor burned out. I ordered the motor from AppliancePartsPros.com after a google search for "best price model # 134159500 Drive motor " The part arrived in 5 days, and it took about 15 minutes to remove the old motor and replace it with the new one. Simple and easy. four screws, four nuts, and two electrical connections. — The hardest step was one of the four mounting screws was way back inside and it took...
Read more
More
$298.70
- Compare At:
-
$355.45
- You Save:
-
$56.75
Genuine Frigidaire part
By: Frigidaire
Part Number: 131494800
This tub-to-pump hose connects the washer's outer tub to the drain pump, channeling water out during the drain cycle. Replacing a worn hose helps stop leaks and restore consistent draining when the original is cracked or deteriorated.
- Provides a sealed path from the outer tub to the drain pump during draining
- Helps the washer remove water at the end of wash and rinse cycles
- Common failure symptoms: water leaking at the front/bottom, puddles after a cycle, or slow/no drain
- Visual clues: cracks, splits, swelling, or soft spots in the hose rubber
What's included: 1 tub-to-pump hose Install notes:
- Unplug the washer and turn off water supply; expect residual water—use a pan/towels
- Access the hose per your model (often behind the lower front/service panel); note routing/orientation before removal
- Transfer and reuse the existing clamps; seat the hose fully on both fittings and secure evenly
- After reassembly, run a brief fill/drain test while watching for leaks
Do-It-Yourself Stories from Customers like You
Leaky drain hose Rocco S. • Rochester , NY • February 24, 2017
Simply open the top of the washer by inserting a putty knife (watch YouTube ) and then the front panel by removing two bottom philips head screws on the front. The whole front panel comes right off. Using pliers the spring clams holding each hose, they come off and each hose is replaced. The drain one was only leaking but since it has open I changed both and even the drive belt. Whole job less than 1 hour. BTW parts arrived next day!
Read more
More
$59.79
- Compare At:
-
$71.75
- You Save:
-
$11.96
Genuine Frigidaire part
By: Frigidaire
Part Number: 137107000
This trunnion plate secures the washer's inner basket to the drive hub/trunnion, keeping the tub centered and stable during spin. Replace it if the basket feels loose, wobbles, or makes scraping/knocking noises from the hub area. What it does:
- Couples the inner basket to the trunnion/drive hub so the basket spins true
- Helps maintain alignment to reduce vibration and tub-to-basket contact
- Wear can allow play or slippage at the hub connection
- Common symptoms: wobble, scraping/grinding, excessive vibration, poor spin results
What's included:
Install notes:
- Disconnect power and wear cut-resistant gloves before servicing
- Access typically requires removing the agitator/wash plate and lifting out the inner basket
- Clean and inspect mating surfaces; align the plate correctly and tighten fasteners evenly
- Check related parts for wear and replace if needed
Do-It-Yourself Stories from Customers like You
Leaking washer tub Hugh S. • Miami , FL • June 25, 2016
The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off...
Read more
More
$20.33
- Compare At:
-
$24.40
- You Save:
-
$4.07