Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Dishwasher not filling with water or filling too slowly? The water inlet valve controls water flow into the tub. DIY-friendly repair with video guide.
I figured it was the valve, but searching on the Appliance Parts site, somebody said they fixed it by replacing the switch flood assembly. So I order both parts. The Switch Flood Assembly was easiest to replace, so I decided to try that first. When I pulled out the old assembly, I noticed it did not 'rattle', as the new one did. So, there is apparently a float ball that had gotten stuck. I put the new one in and poof.. it worked. The only update to the instructions is a reminder that the... Read more
Dishwasher detergent dispenser won't open or latch? This module controls soap release during wash cycles. Moderate DIY repair—30 minutes, door removal.
Tried CLR to remove hard water deposits. That did not help. Ordered new dispenser. The GE series that the detergent module fits in was a little difficult to open. Finally found a video explaining the whole door had to come off in order to open it up to replace the module. Works great now. Read more
Fix a dishwasher that won't start, beeps but doesn't run, or has no display lights with this electronic control board. Moderate DIY repair.
The circuit board under the machine needed replacing. Pretty easy if you are willing to not force it in. Two screws, four all different plugs, two guide holes for the wiring. I bought a latch but did not need to install it. Read more
Replacement end cap for dishwasher rack rails. Prevents upper or lower rack from sliding off when pulled out. Needed when cracked, broken, or missing.
Turn off the power , pull dishwasher and replaced the new one . It is working now Read more
The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack.
Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.
Symptoms of a bad Middle Conduit Assembly include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered part, received it in two days. Parts were amazingly easy to install. Appliance works like new again! Thanks for a wonderful shopping (and repair) experience. Read more
Controls airflow in your dishwasher door. Replace if cracked or if you see leaking from the door vent area. Confirm fit with your model number.
Upon taking the door apart it looked like the leak was coming from the vent so I replaced the vent cap, vent seal and the transition piece. I did not have to change the seals. It took me a while to figure out how to get the door apart, but once I did, it was fairly straightforward. Read more
The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.
Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.
Symptoms of a bad door latch strike include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Based on our research, the dishwasher latch was one of the most common causes for our model of dishwasher malfunctioning. We purchased this replacement unit, and thanks to the help provided via videos and diagrams, my wife and I were able to very easily install the new latch. While this replacement did not totally fix our problem, it was part of it. Shipping on the part was very quick, I ordered it on Friday night, and the latch arrived Saturday morning. Read more
Secures your dishwasher underneath the kitchen countertop. Replace if the bracket is cracked, broken, bent, or missing from installation.
Order parts from Appliance Parts Pros. Read more
If your dishwasher won't start or has no power, the control board fuse may be blown. This 4.1 amp fuse protects electronic components from overcurrent.
I had to remove the dishwasher about 6 inches then remove the door springs and remove the door. Next was to open the cover to reach the circuit board and remove it. The new board was put in and attached the plug. and put the door back together and reinstall the door and springs. Turned the power to check that the lights came on. After confirming I again had power, I turned the breaker off and reinstalled the dishwasher in the cabinet and restored power. Lastly I ran the machine to ensure that... Read more
The door cable and pulley assembly controls the smooth opening and closing motion of your dishwasher door by managing its descent and preventing it from dropping too quickly. Located inside the door hinges, this assembly requires replacement when the door slams shut, won't stay open at various angles, or makes grinding noises during operation.
My first thought was to take the dishwasher to the dump when I saw the pack rats ate the wiring while it was in storage. However, it was only a couple years old so just out of curiosity I looked at the appliance parts pros website and was pleasantly surprised that I could replace every wiring harness on my GE dishwasher for under $100. That is a lot of wire. The process to replace the wiring was nearly effortless. The new harnesses were identical to the old so all I had to do was find the 2... Read more
Replacement drain hose for dishwashers. Carries wastewater from the unit to your household drain. Needed when original hose is cracked, leaking, or damaged.
Replaced drain line Read more
Creates a watertight seal around the dishwasher sump to prevent leaks. Replace if you notice water leaking underneath. Verify fit by model number.
Purchased your parts watched the awesome video on your site. Repair was complete within an hour the dishwasher is running as I am typing this. Thank you so much for the service you offer. Regards, Rich Read more
This wiring harness connects your dishwasher's electronic control board to other components. It carries electrical signals between the control board and various sensors, pumps, and motors. Replace it if your dishwasher displays error codes, doesn't respond to button presses, or operates erratically.
Replaced the circuit board and the associated wiring harness. Read more
The Flood Switch is an OEM part for GE dishwashers. This critical component detects and prevents potential overflows by monitoring water levels within the dishwasher. When excessive water is detected, the flood switch signals the dishwasher to shut off water flow, preventing leaks and potential water damage.
Causes of a bad flood switch can include electrical failures, physical damage from debris, or wear and tear from repeated use. If the flood switch malfunctions, it may not properly detect water levels, leading to possible overflows or improper operation of the dishwasher.
Symptoms of a bad flood switch include:
Fix went fine, had to pull the dishwasher out to replace flood switch control board was very easy to replace, and fixed the problem. Read more
The Ultra fine filter kit is an OEM replacement part for GE dishwashers. As part of the rinse cycle, this filter helps further remove food debris from dishes before the dry cycle begins, allowing for sparkling clean results. The ultra-fine filter is designed with a close-nit mesh that is able to capture microscopic food particles and sediment. This prevents debris from re-depositing onto dishes or interfering with proper drying. Symptoms of a bad ultra-fine filter include:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Initially I replaced the heating element since it appeared compromised. When that failed to fix the problem I went to your site and reviewed the other options and found the exact answer I needed. I replaced the flood switch assembly and ultra fine filter since mine was needed replacing. Problem solved!! Read more
Insulation blanket that wraps around the dishwasher tub to reduce noise and maintain temperature. Replace if damaged, torn, missing, or contaminated.
I pulled the DW out, pulled off the old blanket pieces, vacuumed up the millions of small parts, then put the new blanket on, I did use some packing tape to hold it in place. Easy! The challenge was moving the unit out, then back in, but that was simply time and a little effort. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.