Gdt55ohsd6ss Parts

The Water Inlet Valve is an OEM part for GE dishwashers. This part controls the flow of water into the dishwasher. It opens and closes to allow water from the home's supply to enter the dishwasher at the correct times during the washing cycle.

Causes of a bad water inlet valve include wear and tear from regular use, sediment buildup from hard water, or mechanical failure of the valve components.

Symptoms of a bad Water Inlet Valve include:

• Dishwasher not filling with water
• Water filling too slowly or not stopping once the dishwasher is full
• Leaks detected around the valve area
• Unusual noises coming from the valve during the fill cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pump is an OEM part for GE dishwashers. This part removes used water from the dishwasher at the end of each wash cycle. This part ensures that your dishwasher drains completely, preventing standing water that can lead to odors, mold, and mildew buildup inside the appliance.  

Causes for drain pump issues often involve clogging from large food particles or foreign objects, wear and tear on the pump's motor or impeller, or electrical failures that prevent the pump from activating.

Symptoms of a malfunctioning Drain Pump include:

• Water not fully draining from the dishwasher, leaving residue or standing water
• Loud or unusual noises coming from the pump area during or after the drain cycle
• The dishwasher failing to complete its cycle due to water not draining

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Middle Spray Arm Assembly is an OEM component for GE dishwashers. It is responsible for dispersing water across dishes located in the mid-section of the dishwasher rack. 

The spray arm plays an essential role in cleaning by spraying water directly onto dishes to wash away soap scum and food particles. It works with the lower spray arm and rinse arms to achieve maximum coverage and cleaning power throughout the wash cycle.

Causes of a bad middle spray arm can include buildup of minerals or debris that clogs the spray holes or damage to the arm itself such as bending or breakage. 

Symptoms of a bad middle spray arm assembly include: 

• Spotty or incomplete cleaning of dishes in the mid-rack section
• Clogging or slowed water dispersal from the spray arm 
• Leaks or drips from the spray arm connection point

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore model dishwashers. 

The Detergent Module is an OEM replacement part for GE dishwashers. It is designed to dispense the correct amount of detergent at the appropriate times during the wash cycle, ensuring that dishes are cleaned effectively. The module holds the detergent and releases it into the dishwasher when needed, contributing to the overall performance and efficiency of the appliance.

Causes of a bad detergent module can include buildup of detergent residues, which can clog the dispenser mechanism, or damage to the module's door or latch, preventing it from opening correctly. Additionally, electrical faults or wear and tear over time can impair the module's functionality, leading to ineffective detergent dispensing.

Symptoms of a bad detergent module include:

• The detergent not dispensing or remaining in the compartment after the wash cycle
• Dishes not being cleaned properly due to insufficient detergent use
• The module door not opening or closing correctly
• Leaks or drips from the detergent module area
• Error codes related to the dispensing system

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Water Valve Assembly is an OEM replacement part for GE dishwashers. This valve assembly controls the flow of water into the dishwasher during each cycle stage. It regulates water temperature and volume to the desired wash and rinse settings.

Causes of a bad water valve can include mineral buildup interfering with valve function, worn internal seals, or obstruction in the valve inlet or outlet ports.

Symptoms of a bad water valve include:

• Incorrect or inadequate water levels during the cycle
• Inability to reach proper wash or rinse temperatures
• Water not shutting off fully between cycles
• Leaks from the water inlet area

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models

The Heating Element is an OEM replacement part for GE dishwashers. It is responsible for heating the water during wash cycles and assisting in drying dishes at the end of the cycle. The heating element ensures optimal cleaning and drying performance by raising the water temperature and promoting evaporation.

Over time, heating elements can fail due to wear, mineral buildup, or electrical issues. A malfunctioning element may result in poor cleaning or drying performance.

Symptoms of a bad heating element include:

• Dishes remaining wet after the drying cycle
• Water not heating adequately during the wash cycle
• Error codes related to temperature or heating issues
• Visible damage, such as cracks or corrosion on the element

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Latch is an OEM replacement part for GE dishwashers. This component not only secures the dishwasher door during operation but also contains the door switch that detects if the door is shut. This dual function ensures the door is both securely locked to prevent water leaks and communicates to the appliance that it's safe to begin operation.

Symptoms of a bad door latch include:

• The dishwasher door not closing or locking securely
• The appliance not starting, attributed to the door switch not detecting a closed door
• Water leaks resulting from an unsecured door
• Visible wear or damage to the latch or switch

Common causes for a malfunctioning door latch can be wear and tear from regular use, mechanical failures that impact the latch’s ability to hold the door closed, or issues with the door switch not accurately detecting the door’s position.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Floating Seal Assembly is an OEM part for GE dishwashers. This component ensures a watertight seal around the dishwasher door, preventing water from leaking out during the wash cycle. It is crucial for maintaining the efficiency and reliability of the dishwasher.

Causes of a bad floating seal assembly include general wear and tear, exposure to harsh detergents, or buildup of mineral deposits. These factors can cause the seal to lose its flexibility and effectiveness.

Symptoms of a bad floating seal assembly include:

• Water leaking from the bottom of the dishwasher door
• Poor cleaning performance due to reduced water pressure
• Visible cracks or deformities in the seal
• Increased noise during operation

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Electronic Control Board is an OEM part for GE dishwashers. As the central processing unit, it monitors and orchestrates all washing functions including temperature, spray arms, and the precise dishwasher cycles.

Causes can be moisture damage, power surges over the years, or natural degradation. Replace it with this genuine GE control board to restore optimized cleaning and sanitization along with long-term reliability.

Symptoms of a bad control board include:

• Failure to start or complete cycles
• Unusual noises or rattling sounds mid-cycle
• Inability to select different wash options
• Erratic temperature or inconsistent water levels

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.
 

The Rail End Cap is an OEM part for GE dishwashers. This part is designed to fit on the end of the dishwasher rack rails, preventing the racks from sliding off the rails when they are pulled out for loading or unloading dishes. The end cap plays a role in the smooth operation of the dishwasher rack system, ensuring the stability and security of the racks as they move in and out of the dishwasher.

Causes of damage to the rail end cap often include normal wear and tear, accidental breakage during rack movement, or deterioration over time due to exposure to high temperatures and moisture typical in dishwashers.  

Symptoms of a bad Rail End Cap include:

• Dishwasher racks slipping off the rails 
• Difficulty in pulling out or pushing in the racks smoothly 
• Visible damage or wear on the end cap 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Latch Strike is an OEM part for GE dishwashers. It ensures the dishwasher door latches securely, allowing the appliance to operate only when the door is properly closed.

Causes of a bad door latch strike can include wear and tear from regular use, damage from slamming the door, or misalignment due to repeated opening and closing.

Symptoms of a bad door latch strike include:

• The dishwasher door not latching securely
• The dishwasher not starting or stopping mid-cycle
• Leaks around the door during operation
• Difficulty in closing the door properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Middle Conduit Assembly is an OEM part for GE dishwashers, designed to facilitate the proper routing and distribution of water during the wash cycle. This part ensures that water is evenly distributed to the middle spray arm, providing effective and efficient cleaning of dishes placed on the middle rack. 

Causes of a bad middle conduit assembly can include clogs from food debris, mineral buildup from hard water, and physical damage due to regular use or improper loading of dishes. These issues can impede water flow, reducing the dishwasher’s cleaning efficiency.

Symptoms of a bad Middle Conduit Assembly include:

• Poor cleaning performance, especially with dishes on the middle rack
• Water not reaching the middle spray arm
• Unusual noise during the wash cycle, indicating a disruption in water flow

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Vent Seal is an OEM part for GE dishwashers. Located within the front dishwasher door, it functions to control moist air circulation and maintain humidity levels inside the wash chamber.

Causes of a bad door vent seal can include cracking of the flexible seal material. Mineral or soap deposits may also compromise sealing integrity.

Symptoms of a bad vent seal include:

• Excess condensation buildup within the door interior
• Water leaks detected around door ventilation openings
• Drying and sanitization issues related to inconsistent humidity levels

This GE OEM replacement part is also compatible with Hotpoint, RCA, and select Kenmore-branded dishwashers.

The Dishwasher Control Panel is an OEM replacement part for GE dishwashers. This panel houses the selection buttons and display for programming and monitoring the dishwasher’s wash cycles.

Causes of a bad control panel can include electrical issues, exposure to moisture, or physical damage from regular use. Over time, the buttons may wear out or become unresponsive, and internal components can fail due to power surges or corrosion.

Symptoms of a bad control panel include:

• Unresponsive buttons or touch controls
• The display not illuminating or showing incorrect information
• The dishwasher not starting or stopping mid-cycle
• Error messages on the display

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Mounting Bracket is an OEM replacement part for GE dishwashers. This bracket secures the dishwasher in place underneath the kitchen countertop. 

Causes of failure relate to stresses of a heavy dishwasher pushing down against the countertop edges combined with constant machine vibration over extended service life. 

Symptoms of a cracked or damaged mounting bracket include:

• Excessive movement play or sloshing of the installed dishwasher  
• Strange noises when the dishwasher is running
• Difficulty removing or installing the dishwasher   
• Visible bending of bracket components out of intended position

This genuine GE bracket is compatible with Hotpoint and RCA dishwashers.

The Sump Gasket is an OEM part for GE dishwashers. It forms a watertight seal around the sump area, preventing leaks and ensuring proper water circulation within the dishwasher.

Causes of a bad sump gasket include exposure to high temperatures, general wear and tear over time, and damage from cleaning chemicals.

Symptoms of a bad sump gasket include:

• Water leaking from the bottom of the dishwasher
• Poor cleaning performance due to improper water circulation
• Visible cracks or deterioration in the gasket material
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.