Ge Gsd5320d02bb Parts

Genuine Ge part

Middle Spray Arm (Assembly)

By: Ge

Part Number: WD22X10022

Middle spray arm assembly that directs pressurized water to the dishwasher's mid-level rack for improved cleaning coverage. Replacing a damaged or clogged arm helps restore spray rotation and reduce poor cleaning on the middle rack. What it does:

Delivers rotating spray to the middle rack to rinse and wash dishes and utensils.
Restores proper spray coverage when the arm is cracked, broken, clogged, or not rotating.
Helps reduce leftover food, spots, and uneven cleaning on items in the middle rack.
Integrates with the dishwasher's spray system to distribute water evenly across the mid-level.

What's included: One middle spray arm assembly. Install notes:

Always disconnect power to the dishwasher at the breaker before beginning any service.
Remove the middle rack to access the spray arm; follow the OEM instructions for removal and replacement.
Inspect spray holes and rotation after installation and run a short test cycle to confirm operation.

Do-It-Yourself Stories from Customers like You The middle wash arm was broke Judy W. • Loogootee , IN • December 25, 2015

The old arm was easy to remove and replace. Read more

Genuine Ge part

Pump

4.8 (4)

By: Ge

Part Number: WD19X10015

Do-It-Yourself Stories from Customers like You Ge triton dishwasher didn't drain all the time finally quit draining all together John R. • Medina , OH • February 20, 2016

Every now & then my old GE Triton dishwasher wouldn't completely drain.I had previously replaced the spring-loaded cone shaped drain valve in the back of the tub plus the check valve in the discharge hose.If your dishwasher is old like mine replace these as mine were shot. As per the owners manual to get it to drain you restart it then push & hold the start button 'til the lamp flashes & it should drain. This took care of the draining for awhile but last week it just wouldn't drain after 4... Read more

Genuine Ge part

Pushnut Fastener (Push-On Retainer)

5.0 (1)

By: Ge

Part Number: WD01X10068

This pushnut fastener is a small push-on retainer used to secure shafts, rods, or trim where a threaded fastener isn't required. It provides a secure hold while allowing quick, tool-free installation for maintenance or repairs. What it does:

Secures axles, shafts, or trim pieces by gripping the mating shaft with a one-way push-on design
Keeps panels, knobs, or small components from sliding off during operation
Helps stop rattles or loose parts caused by worn or missing retainers
Simple, non-threaded solution where a reusable bolt or clip isn't needed

What's included:

One pushnut fastener

Install notes:

Press onto clean, appropriately sized shaft until fully seated; do not hammer with excessive force
Wear eye protection when installing small retainers to prevent injury from sudden release
Replace with identical part number to ensure correct fit and retention
Use appropriate pry tools or cutters to avoid damaging surrounding parts

Do-It-Yourself Stories from Customers like You My ge dishwasher wasn't emptying totally Margaret S. • Tacoma , WA • November 09, 2015

I saw the filter was breaking up, and we had to order parts to fix that. Read more

Genuine Ge part

Valve Body Gasket

5.0 (10)

By: Ge

Part Number: WD8X219

Do-It-Yourself Stories from Customers like You Water would not drain out completely Danny D. • Hookstown , PA • January 18, 2016

The Piston and Nut assembly replaced Check Valve and Body and gasket replaced Read more

Genuine Ge part

Vent Assembly

5.0 (1)

By: Ge

Part Number: WD12X10020

Black. Size: 6-5/8".

Do-It-Yourself Stories from Customers like You Water not draining from base of dishwasher Thomas F. • Rancho Mirage , CA • July 17, 2015

Replaced Piston and Nut assembly in rear interior of dishwasher (rubber stopper that stops water from recirculating into tub had disintegrated over 14 years). Part arrived next day (28 hours). Read more

Genuine Ge part

Arm Hinge Assembly, Right Side

5.0 (1)

By: Ge

Part Number: WD14X10008

This is the complete right side hinge assembly. For left side use WD14X10007.

Do-It-Yourself Stories from Customers like You Wife was mad every time the rollers got stuck and top shelf fell down Michael S. • Brandon , MS • December 02, 2016

So, I bought the all new rollers, wheels and brackets! Took a whopping 5 minute. She suffered in silence for years! Read more

Genuine Ge part

Check Valve Body

5.0 (3)

By: Ge

Part Number: WD22X10025

Do-It-Yourself Stories from Customers like You Water remained in dishwasher after cycle Donald S. • Wolcott , NY • May 13, 2016

Review of problem on your web site led to the check valves being the likely culprit! Followed the repair videos and removed the check vave - it was totally deteriorated! Ordered new parts Sunday afternoon -they arrived via FedEx on Tuesday afternoon. About an hour later repair was made, unit reinstalled in cabinet and dishes being washer - All Repaired! Thanks for the great Repair Help and great delivery! Read more

Genuine Ge part

Screw (12-Pack)

By: Ge

Part Number: WZ2X45D

Includes 12 screws.

Genuine Ge part

Vent Flap

By: Ge

Part Number: WD12X10021

Genuine Ge part

Escutcheon

5.0 (2)

By: Ge

Part Number: WD34X10036

Do-It-Yourself Stories from Customers like You Handle cracked and piece broke off Lisa C. • Mcdonough , GA • August 31, 2015

Ordered a new part I guess it's called the control panel ( without the controls) the handle to open and close the dish washer is part of this unit. It was a simple remove and replace. I shut off the power to the dish washer and i simply removed the old unit and replaced it with the new one. Took me about 30 minutes. Read more

Genuine Ge part

Tub Insulation

5.0 (2)

By: Ge

Part Number: WD01X10262

Do-It-Yourself Stories from Customers like You I had a problem with mice behind and on top of my dishwasher had to replace the insulation blanket Lee F. • Sonoita , AZ • November 09, 2018

Pulled it out and cleaned then replaced the blanket. Read more

Genuine Ge part

Mastic Door

5.0 (1)

By: Ge

Part Number: WD01X10337

Do-It-Yourself Stories from Customers like You Multiple leaks on dishwasher Jeffrey M. • Ridgefield , CT • July 13, 2015

The primary leak was the shaft seal around the main water valve shaft. After 15 years, it had failed. The repair was not difficult, but time consuming, since you should remove the dishwasher and lay it on its back. Holding the shaft out while forcefully applying the push-on nut was the only difficult part of the repair, since the push-on nut is very tight and made of very strong metal. The other repairs were just replacements for worn out seals, sound suppression and tightening the door... Read more