Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a blank display, non-working water/ice dispenser, or beeping control panel. This refrigerator dispenser board is a straightforward replacement.
Easy as removing s few screws and switching out two plugs. Read more
Fix a refrigerator that won't cool or clicks but doesn't start. This compressor start relay and overload protects against electrical issues. DIY-friendly.
WENT TO YOUTUBE FOUND OUT HOW TO TEST THE COMPRESSOR IT TESTED GOOD SINCE IT WAS NOT THE COMPRESSOR I ORDERED THE PARTS THAT WOULD MAKE IT WORK AGAIN - THE CAPACITOR & OVERLOAD PTCR COMBO I INSTALLED THE PARTS NOW I HAVE A FRIG. THAT'S WORKING AGAIN.AT A FRACTION OF THE COST TO REPAIR- THANK'S TO YOUTUBE. Read more
Fixes excessive frost buildup in freezer. This defrost heater melts ice from evaporator coils to restore cooling efficiency. Includes installation video.
Ice maker stopped making ice? This dual water inlet valve controls flow to both the ice maker and water dispenser. Common DIY fix for no ice production.
Ordered valves and new ice maker. Couple sites mentioned problem could be ice in the waterline and to make sure temps be set to 37 in frig and 0 in freezer. I had adjusted temps to these the day I ordered parts. Parts arrived a couple of days later so I opened up the ice maker and found the ice bin to be full! Guess the temp adjustment worked. I just kept the parts for when they are needed. For those unaware, access to the ice maker is really simple. There is a latch on the backside of the... Read more
The Door Light Switch is an OEM part for GE refrigerators. It is located near the top of the refrigerator compartment, and it is activated by the door's movement. When the door is opened, the switch is triggered, turning on the interior light to provide visibility. When the door is closed, the switch is released, turning off the light to conserve energy.
Causes of a faulty or damaged door light switch can include regular wear and tear, electrical malfunctions, or physical damage. These factors can result in issues such as the interior light not turning on or off properly, or the light staying illuminated even when the door is closed.
Symptoms of a bad door light switch may include:
This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.
Replaced the two door switches. Read more
Fix freezer not cooling or loud grinding noise from your refrigerator. This evaporator fan motor circulates cold air over coils. DIY-friendly repair.
Vacuumed out coils on the condenser. Read more
Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.
I 100 percent recommend Appliance Pros. This was by far the best experience I've ever had making a purchase on line or via the the phone. Read more
Ice compartment door won't stay shut? This icebox door latch secures the ice maker door closed. Easy DIY repair, typically takes 5-10 minutes.
I purchased the part & was able to replace it myself based on the diagrams on the site. Read more
The Freezer Evaporator Fan Motor and Felt Seal is an OEM part for GE refrigerators. This component is essential for circulating cold air throughout the freezer compartment, ensuring even cooling and preventing frost buildup. The felt seal helps to reduce vibrations and noise from the motor, enhancing the overall performance and quiet operation of the freezer.
Causes of a bad fan motor can include electrical issues, wear and tear from regular use, or physical damage. A malfunctioning fan motor can lead to inadequate cooling and temperature inconsistencies in the freezer.
Symptoms of a bad freezer evaporator fan motor and felt seal include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Well, we have a home warranty and they were called. The Tech arrived opened the freezer and told us we needed a fan. He told us the part would be shipped to our home with an installation date of April 18th or later. Then we got another email that said the part was either on backorder or would be late arriving. So I went on your website and found three fans for our unit. Just to make sure I bought all three and had them shipped for next-day delivery. After watching your videos on the... Read more
Seals around the evaporator motor in your refrigerator. Replace if cracked, damaged, or missing to maintain proper airflow and insulation in the evaporator.
Replaced fan motor in fresh food section, easiest repair I have ever made, took longer to get shelves out than replacing motor.. Read more
Refrigerator not cooling properly? A worn fan gasket disrupts airflow and temperature control. This assembly seals the circulation fan compartment.
Not so easy! The fan is similar to a computer cooling fan but has a rounded housing that slips over a round condenser coil. It slides into a shoe bracket at the bottom. It should slide out towards the back of the refrig by approx 1/2 inch then pull up and out. But the fan shroud wraps around the condenser coil causing you not to be able to slide. You must first take a screw out that supports the condenser coil at the opposite end of the condenser "not easy to get to" then push the coil away... Read more
Detachable ice storage bin with hinged door for refrigerator ice dispensers. Replace if cracked, broken, or missing to restore ice containment and access.
Ordered 2 door shelves from Appliance Parts Pros for my GE Profile refrigerator and was pleasantly surprised to receive the parts in two days. Parts were well packaged and fit perfectly. Was very helpful to be able to view my models parts diagram on-line to assure I was buying the right part. Read more
The Refrigerator Evaporator Cover is an OEM replacement part for GE refrigerators. This insulation shield covers evaporator coils to distribute airflow. Causes involve punctures allowing air and moisture bypass, dislodged mounting flanges detaching insulation protection, or deterioration compromising material integrity over years of use. Failures present as:
This GE OEM replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Ordered a new evaporator fan, heater coil and fresh food fan. Troubleshooting on youtube, ordered the parts watched the video on how to remove old parts and then how to replace them. Called 3 different repair companies, seems no one will work on this GE French door fridge. I am sure someone with experience could change everything quicker! However, my daughter and I got the job done and the fridge is working great again! The videos on the parts ordering were the biggest help, straightforward and... Read more
Fix a stuck or hard-to-open freezer drawer with this lower drawer gear. Replaces broken teeth causing drawer issues. Easy DIY repair, no tools needed.
Bought a replacement gear/wheel for the metal bar. Some of the teeth had broke on the old one. Read more
Ice maker not cycling or producing ice? Stops working after years of use when internal gears wear out. Replacement restores automatic ice production.
The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door.
Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.
Symptoms of a bad Set Screw include:
This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.
By buying handles. BUT I ordered all three parts, whereas I found that the screws were already installed in the handles and it was not necessary to order them. Can I get a refund on them? Read more