Skip to Content
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • lovely images 15 million satisfied customers
  • boxes images Over 2.1 Million Parts In Stock
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store

Gls25jfpabs Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Trunnion (Washer Inner Tub Hub)
Genuine Frigidaire part
By: Frigidaire
Part Number: 131545101

The trunnion is the hub that mounts the washer's inner tub to the drive shaft. Replacing a worn hub restores a solid, centered connection so the basket spins smoothly without wobble, slip, or grinding. What it does:

  • Secures and centers the spin basket on the drive shaft for balanced rotation
  • Transfers drive torque to the inner tub during spin
  • Helps maintain basket alignment to reduce vibration
  • Typical symptoms of failure: loose/wobbly tub, scraping or grinding noises, poor or no spin, frequent out-of-balance events
What's included:
  • 1 trunnion
Install notes:
  • Disconnect power and water before service; wear gloves and eye protection
  • Access the hub by removing top/access parts, then the agitator/wash plate and inner-tub fasteners
  • Clean the shaft and mating surfaces; seat the new trunnion fully and tighten fasteners evenly in a crisscross pattern
  • Inspect related parts (tub seal, bolts, bearing) while open and replace if worn; run a short test cycle to ensure smooth spin

Do-It-Yourself Stories from Customers like You Leaking washer tub   Hugh S. • Miami , FL • June 25, 2016

The seal at the bottom of the tub had started to fail. On large loads water would leak so I ordered a new one rubber seal. Getting the trunnion off the transmission shaft was hard as it was calcified and corroded. I used a wire brush to get some of it off and then used a lot of WD-40. The bolt holding the trunnion plate on sheared off when I tried to remove it on one side and the other came out ok (the bolt hole through the trunnion is not threaded so it should slide out once the plate is off... Read more

More
Timer Elec S Mallory Delta
Genuine Frigidaire part
By: Frigidaire
Part Number: 134049600

 

Do-It-Yourself Stories from Customers like You Washer timer was broken would not advance cycle   David H. • Hollister , MO • August 02, 2015

I ordered a new timer switch and received it in 3 days from the time I ordered it, installation was a breeze and now my washer works great Read more

More
Affresh Cooktop Cleaner
Genuine Whirlpool part
By: Whirlpool
Part Number: W10355051

Size: 10 fl. oz. Used on glass, ceramic and porcelain cooktops.

Do-It-Yourself Stories from Customers like You Replced oven elements   Bruce C. • Carrier Mills , IL • January 18, 2016

Quick shipping, easy repair. Read more

More
Hinge
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387402

Used for control panel.

Do-It-Yourself Stories from Customers like You Kenmore washer would not spin and made a grinding noise   Gregory B. • Wappingers Falls , NY • January 17, 2015

Replaced direct drive washer motor coupling. Instructional video was right on and easy to follow. Was able to save a 15 year old machine for a few bucks. The shipping was super fast (within 2 days) and the customer service is fabulous. I would definitely recommend to everyone. Read more

More
Bake Element
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9752294

 

This part fixes the following symptoms
  • Oven not heating evenly
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Hidden bake element   Franklin F. • Saint Albans , WV • March 18, 2019

Not too bad of a job You do have to remove the right side panel to access the element. Read more

More
Tub Support
Genuine Whirlpool part
By: Whirlpool
Part Number: 280184

 

Do-It-Yourself Stories from Customers like You A bunch of things. Leaking, clutch was slipping and not spinning very well, and the brake was not engaging..   Alan V. • Melrose Park , IL • November 11, 2022

I installed all the necessary parts that I received from you and it works great, now. I received the parts in good time without overnighting them. I had the whole washing machine apart and went through it all before ordering parts. Tear down and assembly was easy. I just took my time. The washer is 17 years old and was well built. It was worth it compared to what is on the market today, and cheaper. Read more

More
Surface Ignitor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8190892

 

Do-It-Yourself Stories from Customers like You One of the ceramic ignitors was throwing spark at the base mounting pan, rather than to the edge of the burner.   David R. • Austin , MN • February 28, 2021

I ordered and installed a new ignitor. Read more

More
Washer Transmission Assembly
Genuine Frigidaire part
By: Frigidaire
Part Number: 134736400

Oil leaking from agitator or poor spin performance? This washer transmission assembly restores wash and spin cycles. Advanced repair, 2-3 hours.

Do-It-Yourself Stories from Customers like You Transmission seal leaking oil into washer tub.   Michael M. • Shirley , NY • February 18, 2024

Transmission seal was not available so I installed a new transmission. Works well. Thank you! Read more

More
Thermostat - Heater
Genuine Frigidaire part
By: Frigidaire
Part Number: 131658100

 

Do-It-Yourself Stories from Customers like You Dryer had stopped heating   Ron B. • Saint Augustine , FL • June 29, 2018

Replaced the dryer heater, and for good measure the limit and thermostat switches. My whole experience with Appliance Parts Pros was exceptional. I had a few questions to which the pros went out of there way to get the answers I needed. They also sent me the service manual which had step by step illustrations on how to disassemble the dryer. Saved a lot of time. Read more

More
Knob, Timer (Black)
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9781954FB

 

Do-It-Yourself Stories from Customers like You Worn out buttons.   Thomas C. • Veneta , OR • August 05, 2022

Replaced. Read more

More
Switch - Temp
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405157

 

Do-It-Yourself Stories from Customers like You No warm or hot water selection   Duane L. • Richfield , MN • May 17, 2014

Replaced water temperature control switch Read more

More
Bleach Dispenser
Genuine Frigidaire part
By: Frigidaire
Part Number: 3204394

 

Do-It-Yourself Stories from Customers like You Missing bleach dispenser.   Jim W. • Ardmore , OK • May 12, 2020

Ordered part. Read more

More
Link
Genuine Whirlpool part
By: Whirlpool
Part Number: WP63466

Used for leveling mechanism. Includes a quantity of one. Order as needed

More
Oven Temperature Sensor Probe
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9782081

Size: Approx 6 inches in length from the sensor tip to the mounting bracket.

This part fixes the following symptoms
  • Won't start
  • Little to no heat when baking
See more...
Do-It-Yourself Stories from Customers like You Oven not coming up to temperture & broiler not working   Paul C. • Edison , NJ • September 19, 2014

New Ignitors & Sensor Probe. Range now working like new. Very pleased with my experience with the folks at Appliance Pros. Great company to do business with. Received parts the next day!! Read more

More
Lid
Genuine Whirlpool part

Lid

By: Whirlpool
Part Number: WPW10193874

Color: White

Do-It-Yourself Stories from Customers like You Lid was rusted bad   Mike S. • San Lorenzo , CA • December 06, 2016

New parts easy fix Read more

More
Terminal Block Screw
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303208586

This terminal block screw secures the power cord leads to the appliance's terminal block, helping maintain a tight, reliable electrical connection. Replace missing, stripped, or heat-damaged screws to restore proper clamping of the wire lugs.

  • Clamps incoming power wires to the terminal block for a secure electrical connection
  • Replaces stripped, corroded, or missing terminal screw
  • Designed to fit the original terminal block hardware locations

What's included: 1 terminal block screw Install notes:

  • Disconnect power at the breaker or unplug the appliance before servicing
  • Access the terminal block (location varies by model); note wire positions
  • Inspect terminal block and wire lugs; replace any heat-damaged components
  • Install and tighten the new screw securely without over-tightening; reinstall access cover and verify strain relief is in place before restoring power

More
  • boxes images Over 2.1 Million Parts In Stock
  • time delivery images 2 Day Quick Delivery!
  • box-refresh images 365 Day Return Policy!
  • headphone imagesFree Tech Support!
  • google images Google Trusted Store