Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fix a broken or missing detergent dispenser cover that's cracked or won't guide proper detergent placement. Simple 5-minute replacement repair.
After examining it, 2 of the 4 retainer clips had broken off. My wife grabbed her tablet, found Appliance Parts Pros website, saw 2 videos featuring our exact model of washer and ordered the 3 parts to replace broken and soon to fail parts ! Shipping was extremely fast ! Took out old assembly, replaced with new assembly in about 15-30 second, wife was happy, therefore I was happy ! Thx for being there ! Read more
Washer won't spin or makes loud whining noise? The drive motor powers drum rotation. Moderately difficult repair, takes 30-60 minutes. Video guide available.
I watched videos on the website and took it apart. Put new motor on, also I put new belt even though the original belt was still ok, but I saw a little sign of shredding ...and there! !! It works like brand new washing machine. . Thanks to appliancepartspros.com...It made save a lot of money by doing it myself.. Read more
This vane screw secures the internal drum baffle (vane) to the drum, keeping loads turning properly and preventing rattles or snags. Replace a missing or stripped screw to restore a tight, stable baffle during cycles.
Unscrewed the front lower panel ( 2 screws ). Disconnected the pump hose clamp and removed the hose. I loosened the lower back panel and pulled out the drained hose from the rear. Replaced with new hose put back clamp and panels. Very easy Read more
Washer won't start, shows error codes, or cycles randomly? The main control board manages all wash functions. Moderate DIY repair with careful handling.
After first doing a Google/YouTube search, There was only one "hit" on my search results. Next I went to an appliance message board forum but after almost a week and more than a dozen views, no response was received. This is unusual. I've been on this board before with positive results. They also changed the "rules" for DIYers which could explain why I didn't have a lot of response from the experts. I attempted to get the unit into diagnostics mode. I was unable to clear the E90 "general... Read more
Carries wastewater from your washer's drain pump to the standpipe or sink. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more
Secures hoses to pumps, tubs, and valves preventing leaks. Replace if worn, loose, or causing drips during cycles. Confirm fit with your model number.
New hose and clamp. Read more
Washer drum baffle mounts inside the tub to lift and tumble laundry. Replace if cracked, broken, or missing to prevent snags and restore quiet operation.
Removed old baffle. Had to cut it out with a multi-purpose tool. Replaced with new one. Job was not too bad, and only took about 15-20 minutes. The best part was the fast delivery time for the part. Ordered the PM of one day, and had it in the early morning of the next day. (OUTSTANDING!!!) Read more
Shipping bolt kit secures washer tub and suspension during transport. Install before moving to prevent internal damage, then remove before use.
Ordered a shipping support kit from AppliancePartsPro.com, got it shipped next day, and installed the kit in less than 5 minutes to prep front loading washer for immediate moving. Read more
Fix E32 error codes or washer stopping during fill with this water level pressure switch. Senses water level and controls fill cycles. DIY-friendly repair.
The E32 diagnostic code that the Frigidaire washer was throwing after a quick water fill attempt was not in the supplied Data Sheet that came with the washer and Frigidaire would not provide and updated Data Sheet because, "it's a liabiliity issue" was their statement, but they did tell me that the problem was in the Fill Pressure Sensor/Wire Harness or the Main Control Board (the display board). I ordered the Pressure Sensor and Main Control Board from AppliancePartsPros after checking... Read more
This replacement screw secures appliance panels and components. With a #10-16 thread and 0.75-inch length, it replaces stripped, rusted, or missing hardware to restore a tight, rattle-free fit and reduce vibration and noise.
Googled the problem, watched videos on Youtube. Took apart machine and tried cleaning filter most people said was the problem. Wasn't anything but a penny in it so that wasn't the problem. I decided the pump must be bad ,the spring for the bellows and the console were broken so I bought those as well. Got the parts put them on and machine filled up with water turned over a few times and then stopped. The only thing else it could be is the fill level sensor or the main circuit board. Ordered... Read more
Machine screw secures panels, brackets, and internal components in washers. Replace missing, rusted, or stripped screws to restore proper fit and alignment.
I ordered new latch and 2 new screws ( imagine not having the screws). I put latch in place and with a phillips screw driver attached 2 screws. Tada works like new. If the owner would have just done this herself, I wouldnt have a new set of infinity front loaders for under $300. So thrilled that I can get replacement parts for my appliances. Read more
Replacement mounting screw for washers and laundry centers. Secures components like pulleys, brackets, and panels. Replace if missing, stripped, or damaged.
New parts ordered and installed. Hooked everything back up and she's running like a stealth bomber over North Korea.. completely silent Read more
This is the complete detergent dispenser drawer assembly for a front-load or top-load washing machine. It holds and dispenses detergent, fabric softener, and bleach at the appropriate times during the wash cycle. Replace this assembly if the dispenser drawer is cracked, if detergent is not dispensing properly, or if residue builds up and cannot be cleaned out.
Replaced the water valve assembly. did not really need the dispenser part. problem mainly caused by hard water buildup where the hose connects. also replaced the hoses as they also had some hard water buildup. Read more
This is a metal hinge that attaches the dryer door to the cabinet and allows it to swing open and closed. It supports the weight of the door and ensures proper alignment with the door latch. Replace this hinge if the dryer door is sagging, not closing properly, or if the hinge is cracked, bent, or has worn-out pin holes.
After reading up on the error codes, I found that my constant beeping was telling me that the door was not well latched. My machine is 12 years old and has seen heavy use, including a broken door handle that has been hanging on with copious amounts of duct tape for a while. I replaced the bent door hinge, worn door latch, and the outer handle. The entire repair required ten minutes and a Phillips head screwdriver. Now it works perfectly with NO more beeping!! Thank you AppliancePartsPros!! Read more
The Cord is an OEM replacement part for Frigidaire washing machines. Extending from the rear of the unit, it safely powers the washer through a connection to a wall outlet.
Causes of cord failure are normal wear from frequent coiling and plugging/unplugging motions over the appliance's lifespan. Rodents or sharp edges may also damage the outer jacketing.
Signs of a bad cord include:
Compatible models also include Electrolux, KitchenAid, Jenn-Air, and Kenmore options. Maintaining safety is a top priority.
Ordered a new power cord off this website Read more
Pan head mounting screw for dryers. Secures internal components and panels. Replace if stripped, missing, or damaged during appliance maintenance.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.