Your privacy choices: We and our partners use cookies for analytics and ads. Decline all turns them off.
Privacy Policy · Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement fastener screw for appliances. Secures panels, trim, clips, and components. Needed when original screws are stripped, missing, or damaged.
Removed the handle with two screws on the inside front and pulled out the custom wood panel. Pulled the compactor out from under cabinet. Tipped it over on back of unit, supporting it with a little foot stool. Unscrewed two lower screws at bottom of unit holding black trim panel (that held wood panel in place) and lower black rubber flap. Removed two screws on lower outside side of unit that held the foot pedal. Slid off black U shaped metal frame from top of compactor towards bottom. Slid on... Read more
Fixes ice buildup in freezer and no cooling in fridge. This defrost heater kit melts frost from evaporator coils to restore airflow and temperature.
Defrost heater and thermostat. Read more
Fastens the auger shaft in your refrigerator's ice maker assembly. Replace if cracked, broken, or missing to secure the auger and prevent rubbing.
Replaced "Ice Crusher Housing" and "Fixed Blades Spacer, both of which had broke. Read more
Collects water from evaporator defrost cycles. Mounts near compressor under refrigerator. Replace if cracked, leaking, or damaged to prevent odors.
Previously, I removed the lower rear cardboard back of the unit and saw the crack in the defrost pan. It was probably damaged when unit was moved using appliance hand truck. I looked up the part number AP4319611 in the exploded view diagrams of the unit. The part was ordered and delivered in a few short days. Emptied the unit and removed all shelves/glass to avoid damage since the unit must be tilted enough to reach under and remove two 1/4 inch hex screws. Tilted to the right side (facing... Read more
1/4 inch compression nut for securing plastic water lines in refrigerators and ice makers. Replace worn, cracked, or missing nuts to prevent leaks.
Ordered part from AppliancePartsPros.com and received it 2 days later. Put the part in, fit like a glove, water and ice cube maker working flawlessly again with no leaks. Thanks. Read more
Secures the crisper slide rail to the refrigerator liner for smooth drawer operation. Replace if broken or missing to restore proper alignment and support.
This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.
Ordered Bake Element, Y04100019 (Whirlpool AP4283614) to replace a broken bake element on my 30-year old Jenn-Air Model S125 Downdraft Slide-in electric range. Received the element very quickly but it had been damaged in shipping. Called AppliancePartsPros to report this and they quickly shipped another element - very easy process. To install the element, I turned off the power to the range, put on rubber gloves (just in case) and removed the two sheet metal crews at the rear of the oven -... Read more
Replaces a cracked, broken, or worn ice dispenser lever on your refrigerator freezer door. Press this actuator with your glass to release ice.
A friend's ice dispenser was not working so I told them I'd see what I could find on the forum. Originally I thought the micro switch had gone out. When I received the part and went to replace it I found that the little plastic tab that engages the micro switch was actually broken off on the Ice Actuator. I returned the switch and got the correct part. It arrived in a couple of days. It took about 15 minutes to replace. Everything is working great now. The repair was pretty easy to do. I found... Read more
Internal tubing that carries water from the supply valve to various refrigerator components like ice makers and dispensers. Replace if you notice water leaks inside the refrigerator or reduced water flow to dispensers.
Replaced the broken parts. The water leak was caused by the drain valve not directed into drain pan Read more
This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.
Replace dispenser micro switch. Also replaced broken faceplate and rusty screws. Appliance parts Pro YouTube video was helpful in diagnosis and disassembly. Parts arrived quickly. Read more
Limits how far the refrigerator door swings open. Replace this stop if it's worn, broken, or missing to protect the hinge and prevent door overextension.
The plastic bearing broke after 7 years of too much opening and closing. Removing original bears were not real easy, however installing new ones were quick. It works well. The parts arrived really quickly. Read more
This replacement ice bucket housing encloses and supports the freezer's ice storage bin at the dispenser. A damaged housing can cause bin wobble or misalignment—replacing it restores a secure fit, smoother dispensing, and helps reduce stray ice and frost.
The removal of the ice bin and auger motor was easy but removing the auger from the shaft was another story. The auger was frozen to the shaft even after it sat out overnight. I carefully applied heat with a propane torch, directly on joint of the auger and the tip of the shaft, followed by a few drops of cold water. Once the shaft and auger cooled the auger separated easily. Putting the components back together was simple taking about ten more minutes. Read more
Ice won't dispense or grinds loudly? A bent or worn crusher blade is often the culprit. This blade fits inside the ice bucket assembly. Easy DIY fix.
I ordered (3) new replacement blades and received them in two days! Read more
The Frigidaire Touch-Up Paint is white in color in a .6 fl oz bottle. For almond order 5303321320. For black order 5303321321.
The Touch Up Paint is an OEM part for Frigidaire appliances. Whether you're dealing with scratches, chips, or other minor cosmetic damage, this touch-up paint provides an easy and effective solution for maintaining the appearance of your appliance. It's designed to adhere well to metal surfaces, offering durability and resistance to further wear and tear.
Over time, appliances can accumulate minor surface damage from regular use, cleaning, and accidental impacts. Using the Touch Up Paint not only improves the aesthetic appeal of your appliance but also helps protect exposed areas from rust and corrosion, which can extend the life of the appliance.
Symptoms of needing Touch Up Paint include:
Quick touch up. The paint worked great. Packaged with a brush like nail poliish Read more
This limit switch monitors a set condition and opens or closes its contacts when that limit is reached. Replacing a failed switch restores proper safety cutoff and consistent operation of the appliance's heating or movement system. What it does:
I replaced the switch which was bad and also replaced the water inlet valve. Read more
Ice won't dispense or jams in crushed mode? This crusher blade fixes bent or broken blades in your ice bucket assembly. Easy DIY repair with video guide.
Opt-Out Request Honored
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.