Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Ice dispenser not working or just humming? The auger motor drives ice delivery. Easy DIY fix in under 15 minutes with our video guide. Restore ice flow.
Replaced auger motor Read more
Seals your refrigerator's fresh food door to prevent air leaks and maintain proper temperature. Replace if torn, cracked, or door won't stay closed. Verify fit.
Ordered replacement seals for both freezer and refrigerator sides. Followed directions that I had found on YouTube. The installation in a nut shell is warm the seals in a bathtub with very hot water for at least 2-3hrs then place the seals. Then warm the seals with a hair dryer as needed. After getting the seals out of the hot bath the installation took all of 20-25 minutes for both seals. Read more
Replaces a cracked, broken, or worn ice chute funnel in your refrigerator door dispenser. Directs ice from the auger to your glass or container.
Replaced parts. I viewed YouTube video prior. Easy installation. Read more
Left-side glide rail that supports and guides your refrigerator's ice bucket or drawer. Replace when cracked, broken, or worn to restore smooth sliding.
It was very simple, took longer to unload freezer than to install glides Read more
This cam mechanism helps your refrigerator door close automatically and stay properly sealed. It provides the mechanical action that pulls the door firmly shut when you push it nearly closed. Replace it if your refrigerator door won't stay closed, doesn't seal properly, or requires excessive force to close completely.
Replaced the two parts ordered. Read more
This cam mechanism helps the refrigerator door close properly by providing the correct closing force and alignment for the lower hinge. It ensures the door seals tightly and maintains proper spacing from the cabinet. Replace this part if your refrigerator door doesn't close completely, hangs crooked, or requires excessive force to shut.
We bought a used fridge and forgot to get the hardware to mount the doors. Looked up the model on your website. Using the pictures I was able to order just the parts I needed and not to duplicate anything (or leave anything out!). The parts arrived and because I watched the "how to" video I knew to use the "trick" to hold the doors up while attaching the hardware. Had the doors mounted in less than 15 minutes!.. Thanks Read more
This black lever assembly operates the freezer door handle mechanism, allowing smooth opening and secure closing of the freezer compartment. It connects the external handle to the internal door latch system. Replace this part if your freezer door handle is loose, won't open the door, or if the handle feels disconnected when pulled.
I replaced the lever asm. and spring Read more
This is a grommet and gasket assembly that seals the ice maker water fill tube where it passes through the freezer wall. It prevents warm air from entering the freezer compartment and stops moisture from building up around the fill tube opening. Replace this assembly if you notice frost or ice buildup around the fill tube entry point, water leaking near the ice maker, or if the existing grommet is cracked or deteriorated.
Replaced water line from valve to ice maker Read more
The Chiller Shelf is an OEM replacement part for GE refrigerators. Located inside the refrigerator door, this shelf provides storage for items like snacks, beverages, condiments, or leftovers that benefit from cooler temperatures.
Causes of a bad chiller shelf can include cracks or breaks developing from prolonged use. Items may have been over-packed onto the shelf, putting undue stress on the plastic material.
Symptoms of a faulty chiller shelf include:
This OEM GE shelf is also compatible with Hotpoint and some Kenmore refrigerator models.
My refrigerator is 13 years old and has always been a pain. The shelf above the ice maker broke last year which caused the ice maker to keep making ice even when the bin was full (the shelf keeps the ice contained which causes the ice buildup to shut off the ice maker). My water dispenser would occasionally refuse to dispense water. It appeared to me that the issue was caused by the nozzle freezing. The trap door for the ice was not closing properly so freezing air was always blowing out. ... Read more
Refrigerator light not working? This light bulb socket holds the bulb securely and provides electrical connection. Easy DIY repair with video guide.
Had some confusion of what part I needed, needed the one with the motor and thermostat. Fortunately, I've been fixing wiring for many years, I simply cut the new motor out of the harness, and used that nice glue-inside-heat-shrink tubing to seal the soldered 'Western Union' style splices. New light socket and lamps fit fine, worked fine, new motor is fine, problem resolved. FYI: Look closely at the wiring in you unit, there are two wire harnesses, one feeds the light, the other feeds the motor... Read more
Seals the back edge of your refrigerator's crisper cover to maintain proper humidity and airflow. Replace if worn, cracked, or causing gaps. Confirm fit by model.
I thought I would have to buy a whole new refrigerator, but I looked online at AppliancePartsPros.com. I put in my model number of the refrigerator and the whole diagram came up. This made it so much easier to choose the parts I need to replace. I received the order in a few days so I was able to fix the problem quickly. The assembly was easy and the video helped also. Read more
Plastic shelf stop locks refrigerator shelves into liner slots. Replace if cracked, broken, missing, or lost during cleaning to secure shelves properly.
Watched short You Tube repair video. I saved at least on a $100 GE service call. The electronic ID assembly was priced much less than quote on GE.com! Read more
Replacement door bin for side-by-side refrigerators. Installs on the inner door to store condiments, bottles, and jars. Replace if cracked or broken.
I was running out of room in my fridge & adding an additional door shelf helped. It was easy to get the right one & I got it the next day & easily placed it in Read more
Humidity control slider for refrigerator crisper drawers. Replaces broken, cracked, or missing adjusters. Installs on drawer to regulate airflow and moisture.
Ordered new parts Read more
This helix is the plastic spiral inside the refrigerator's ice bucket that works with the auger to move ice toward the crusher and dispenser. Replacing a worn or broken helix restores smooth ice dispensing and reduces jams.
Ice was not being dispensed when lever was pushed in either crushed or cubed mode I removed the ice bin. After searching the web for reasons for this I pulled the bin out and started looking at auger assembly. I noticed that the sections of the Helix blades were missing. Ordered the Helix here at AAP and received the part the next day. The whole process took about an hour and as others have noted, you have to disassemble the bin assembly to get the auger assembly out. I watched the video... Read more
The Ice Deflector Spring is an OEM replacement part for GE refrigerators. This spring is a crucial component of the ice dispensing system, specifically in selecting between crushed and whole ice cubes. It is designed to always force the diverter back in a way that the cubes get crushed. When whole cubes are selected, the solenoid pulls the lever against the spring’s tension to shift the configuration, allowing cubes to bypass the crusher blades.
Causes for a malfunctioning Ice Deflector Spring can include wear and tear from regular use, corrosion due to constant exposure to moisture, or mechanical failure that prevents it from effectively reverting the diverter to the crushed ice configuration.
Symptoms of a bad Ice Deflector Spring include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
When I took it apart I found that the drive cup was cracked, the helix lock plate hole was reamed out and the ice deflector spring was broken. The biggest problem was the helix had slipped down the shaft and allowed the end of the shaft to bore a hole in the housing which made it a bear to get out. Others have had the same problem. Once I got past that obstacle, it was simple to replace all the parts and it's working like normal again. Very helpful video explaining the repair. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.