Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Gst9679pbo Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Ground Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3351614

Size: 10-24 x 3/8 inch.

Do-It-Yourself Stories from Customers like You Timer/control failed   Gilbert G. • Lansing , IL • July 09, 2018

Replaced timer control unit, first time doing this. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Siphon Break Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285320

This siphon break kit prevents water from siphoning back out of the washing machine tub through the drain hose during the fill cycle. It acts as an air gap device installed on the drain line to ensure proper water levels are maintained. Replace this kit if your washer is not filling properly, takes too long to fill, or you notice water draining out as fast as it fills.

Do-It-Yourself Stories from Customers like You I needed a siphon valve for an old maytag washer   Shane F. • San Anselmo , CA • April 17, 2015

I bought a part and it worked perfectly. I was able to connect a flexible pipe to the siphon valve and set up a grey water system from our washing machine. Read more

More
$59.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Appliance Biscuit Spray Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392901

13 oz. enamel spray paint in biscuit color for appliances. Restores scratched, chipped, or discolored surfaces on refrigerators, dishwashers, and more.

Do-It-Yourself Stories from Customers like You Refrig had some scratches and small dots of rust   Heather D. • Middletown , DE • December 31, 2014

Purchased bisque spray paint. Product is "almost" a perfect match as color of refrig; was not as glossy but did the trick. Read more

More
$56.71

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer E-Ring Retaining Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: W10083190

Secures shafts and pulleys in your washer to prevent axial movement. Replace when worn or damaged to restore proper alignment. Confirm fit with model.

More
$7.71

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Switch Mounting Screw
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9740848

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

  • Loose or rattling switch within the console face  
  • Difficulty selecting cycles as buttons wobble out of place
  • Water intrusion hastening corrosion of electrical terminals
  • Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Neptune mah4000 had a no spin but did pump water out but not all of it   Guillermo S. • Chicago , IL • March 06, 2017

I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more

More
$7.56

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Drain Hose Nozzle
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3357027

Drain hose nozzle that attaches to the end of your washer's drain hose. Replace if cracked, broken, or missing to ensure proper hose connection.

More
$50.57

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Hose Coupling
Genuine Whirlpool part
By: Whirlpool
Part Number: WP16272

Leaking water connection? This hose coupling creates a secure seal between your washer hose and water inlet, stopping drips and loose connections. DIY fix.

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Drain Hose Coupling Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285442

Connects the drain hose to the washer drain outlet. Replace this coupling kit if cracked, broken, or leaking to restore a secure connection.

More
$50.57

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Drain Hose U-Bend Retainer Clip
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8577378

Secures your washer's drain U-bend to prevent leaks and keep plumbing properly aligned. Simple push-fit installation takes just minutes to complete.

Do-It-Yourself Stories from Customers like You Needed to move washing machine discharge hose   Sally C. • Syracuse , NY • November 01, 2019

Added adapter and placed hose over laundry tub edge. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Wire Tie
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10339879

 

Do-It-Yourself Stories from Customers like You Kenmore washer made humming noise no agitation no more spin   Peter W. • Cupertino , CA • October 18, 2026

Paid a friend and he changed the coupler, worked a couple times, then same prob. Hired a pro, ordered a lot of parts, changed drive shaft, transmission/gear case assembly, motor, coupler again. Refunding a lot of unnecessary parts. Read more

More
$5.95

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Wire Connector Block
Genuine Whirlpool part
By: Whirlpool
Part Number: W10876590

Wire connector block for washers. Transfers electrical connections between wiring harnesses. Replace if connector housing is cracked or melted.

More
$9.82

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Washer Rear Panel
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3357978

Rear panel for your washer. Replaces cracked, dented, or rusted panels. Covers the back of the machine for a complete, finished appearance.

More
$171.34

IN STOCK
Ships Tomorrow Guaranteed

Most orders arrive by Wednesday, November 25

Add to Cart
Best Seller
Washer Vacuum Break Hose
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8317926

Connects the vacuum break to the outer tub in your washer. Replace if cracked, split, or leaking to prevent water from bypassing the tub during fills.

Do-It-Yourself Stories from Customers like You Hose broke sending water that was supposed to goto the tub directly onto the floor.   Trent M. • Tinley Park , IL • March 14, 2014

Unscrewed console and tilted it back. Then removed clips for machine skin. Rocked it back slightly to access the tub side hose. Removed water inlet valve assembly and removed from the valve. Fished out the old hose. Fished in new hose. Reattched it then reassembled unit. Spent 15 min looking for clip I lost on NASTY FLOOR AAAAAARGH! When done I tested it then found the cold inlet hose screen was clogged. Went to store and replaced hoses and inlet screens too. Glanced over at other washer and... Read more

More
$24.68

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Balance Ring
Genuine Whirlpool part
By: Whirlpool
Part Number: WP387240

The Balance Ring is an OEM part for Whirlpool washing machines. This part maintains the stability of the washer drum during the spin cycle. It contains liquid that helps balance the load, minimizing vibrations and noise while ensuring smooth operation.

Causes of a bad balance ring can include general wear and tear, exposure to heavy or unbalanced loads, or physical damage.

Symptoms of a bad balance ring include:

  • Excessive shaking or vibrating during the spin cycle
  • Loud banging noises
  • Washer moving or walking during operation
  • Uneven or off-balance loads

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Washing machine would shake so bad during the spin cycle that it would move about a foot   Charles L. • Arroyo Grande , CA • April 17, 2017

I first checked to make sure the washer was level. The washer is on a concrete floor. After watching lots of you tube videos I ordered all the parts that could be causing this problem. I ordered: Balance Ring, Suspension Pad Kit (3 rectangle plastic wear pads), Tub Suspension Pads(3 curved plastic wear pads), Suspension Spring, and a Spanner Wrench tool. After getting the washer apart it was obvious that the problem was the Tub Suspension Pads they had completely worn away so that only the... Read more

More
$81.74

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Best Seller
Washer Drive Motor
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8529935

Washer won't agitate or spin? A failed drive motor prevents wash and spin cycles. DIY replacement restores proper operation in 1-2 hours.

Do-It-Yourself Stories from Customers like You Noise during second spin cycle   Brent B. • Indianapolis , IN • July 02, 2017

Started out as a replacement of the coupling between the motor and the basket transmission ( 2 of the 3 legs on the transmission side broken.. )... Bought a new pump, since I would have it off... or so I thought.. Metal output shaft into pump + years of moisture = pump rusted on. Put it all back together - runs fine... for a while.. Then the old pump bearings burn out. Back apart.. Cut the old pump off the motor. Reinstall everything... Nothing, Just sits there and buzzes... Now... Read more

More
$259.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Spin Tube Assembly
Genuine Whirlpool part
By: Whirlpool
Part Number: WP64208

Spin tube assembly with drive spacer, bearing, and shaft seals. Replace if washer leaks from bottom or basket doesn't spin properly. Verify fit.

Do-It-Yourself Stories from Customers like You There was a center (tub) shaft seal leak in our Maytag washing machine.   John W. • Manvel , TX • June 02, 2021

It was fairly difficult, but I watched and followed the Appliance PartsPros video and was able to get it done using the parts I purchased from APP. The leak has stopped (but I'm still watching after 5 loads). Read more

More
$154.38

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google