Gts18gthww Parts

The Control Temp is an OEM component specifically designed for GE refrigerators. It enables precise temperature regulation within the refrigerator. 

The control temperature sensor monitors interior conditions and sends feedback to the control board regarding temperature deviations. Based on sensor readings, the board triggers the cooling system accordingly to maintain the desired set point. 

Symptoms of a bad control temp sensor include:

• Fluctuating interior temperatures that cannot be stabilized
• The cooling system running inconsistently or excessively  
• Inability to accurately adjust or maintain set temperature levels

Causes can relate to sensor failure over time due to age, thermal stress from freezing/thawing, or physical damage.

This genuine OEM GE replacement part ensures the control system has accurate temperature input to function optimally. Compatible with Hotpoint, RCA, and Kenmore refrigerator models as well. Replace yours to restore reliable cold storage performance.
 

Replace your refrigerator's center door hinge to restore smooth door movement and maintain a proper seal. Supports door weight at the pivot point. Confirm fit with your model number before ordering.

Replace a damaged air tower cover causing uneven cooling or visible wear. This assembly directs airflow through the evaporator and installs in 30-45 minutes.

Secures brackets, panels, and internal components in your refrigerator. Replace missing or damaged screws to eliminate rattles and keep parts aligned.

Ice maker not filling or water spilling? This fill cup directs water into the ice maker mold for proper ice production. Simple clip-on install.

Fridge not cooling or making clicking sounds? This compressor start relay and overload helps the motor start and prevents overheating. DIY-friendly repair.

Plastic water tube that routes water between refrigerator components like the inlet valve, dispenser, and ice maker. Replace if cracked, brittle, or leaking.

Leveling leg threads into the refrigerator base to support and stabilize the cabinet. Replace if cracked, broken, or worn to keep your unit level.

Top hinge and pin assembly supports refrigerator door weight and provides pivot point for smooth operation. Replace when door sags or won't seal properly.

This plug button is a small snap-in cap used on refrigerators to cover exposed holes on door handles, liners, or trim. It restores a clean, finished look while helping keep dust and moisture out of the cabinet.

• Snaps into a screw or access hole on a handle, liner, or trim panel
• Covers fasteners and gaps for a clean, finished appearance
• Helps block dirt and moisture from open holes
• Typical symptoms: missing cap, broken or loose plug, visible screw hole or cosmetic gap

• Unplug the appliance before servicing and use caution around sharp edges
• Align the plug with the hole and press straight in by hand until fully seated and flush
• For handle screw holes, tighten fasteners first, then install the cap
• Avoid using metal tools on finished surfaces to prevent scratches

Fix a refrigerator that won't cool and clicks every few minutes. This start relay and overload assembly mounts on the compressor to restore reliable starting.

Control knob fits onto your refrigerator's control shaft to adjust temperature and settings. Replace a cracked, stripped, or missing knob for smooth operation.

A replacement reversible plug door that covers and protects the appliance power inlet while letting the cord exit left or right for tidy cord routing. Restores a clean back panel appearance and helps keep the power connection protected from debris. What it does:

• Covers the power inlet opening to protect the plug and inlet from dust and debris.
• Reversible design lets you route the power cord to either side to fit against the wall.
• Helps keep the cord tucked close to the appliance so the unit can sit flush with cabinetry or walls.
• Replace when the door is cracked, broken, missing, or no longer holds the plug securely.

• Always unplug the appliance before starting any repair or inspection.
• May require access to the rear panel; check your owner's manual for disassembly steps.
• Check orientation before finalizing installation to ensure correct left/right cord routing.

This genuine fastener secures appliance components such as panels and brackets. Replacing a missing or stripped screw restores proper fit and helps reduce vibration or rattling. Features 12-24 threads and an approximate 0.785-inch length. What it does:

• Fastens panels, brackets, covers, and other hardware points in the appliance
• Helps maintain proper alignment and a tight fit of components
• Replaces damaged, stripped, or missing hardware
• Common symptoms include loose or rattling parts and hardware that won't tighten

• One screw

• Disconnect power before servicing; shut off water supply if working near water components
• Start the screw by hand to avoid cross-threading; replace one-for-one in the original location
• Use the correct driver bit for the head style; tighten snugly without overtightening into plastic or thin metal

Secures refrigerator wiring to prevent chafing and vibration noise. Replace when damaged or missing to keep harnesses organized. Confirm fit by model.

8-18 CA HX 1/2 S