Gts22kyncrfs Parts

This bottom hinge supports the refrigerator door at the lower pivot point, keeping it aligned so it opens smoothly and seals correctly. Replace a worn hinge to restore proper closure and help maintain an airtight door seal.

• Provides the lower pivot and support for the door
• Helps maintain alignment for consistent gasket contact and smooth swing
• Wear or damage can cause door sagging, rubbing, or incomplete closure
• Misalignment can lead to air leaks and temperature fluctuations
• Clicking, grinding, or loose movement near the hinge may indicate wear

• Unplug the refrigerator; turn off water to the dispenser/ice maker
• Remove door bins/contents and support the door to prevent strain on wiring or tubing
• Remove the lower hinge cover, note shim/spacer locations, and transfer them to the new hinge
• Reinstall hardware, align the door, and ensure the gasket seals evenly all around

This replacement can shelf restores secure, organized storage for beverage cans in your refrigerator. It replaces a cracked, loose, or missing bin so cans stay in place and are easy to access.

• Holds beverage cans securely to help prevent tipping and spills
• Replaces a cracked, warped, or missing shelf/bin
• Restores original storage capacity and organization
• Installs using existing slots/tabs—no modifications required

• Remove the damaged shelf and clean the mounting area
• Align the new shelf's tabs with the slots and press evenly until it locks in place
• Do not force; seat both sides evenly to avoid breaking tabs
• After installation, avoid overloading to prevent damage

This is a grommet and it is intended for use on refrigerators and freezers. This is a genuine replacement part made by General Electric. A new grommet might be needed if the current one is visibly worn out or damaged in any way. If there are noises from vibration coming from the lower back area of the fridge there might be need for a new grommet. This is an OEM part sourced directly from the manufacturer, and it is sold individually. It is compatible with refrigerators and freezers, or units with a compressor and is made by General Electric.

The Condenser Fan & Housing is an OEM replacement part for GE refrigerators. It is responsible for circulating air across the condenser coils, dissipating heat and providing proper airflow and cooling for your refrigerator.  

A bad condenser fan and housing can occur due to wear and tear over time or damage caused by mishandling or accidents. If you notice symptoms such as excessive heat in your refrigerator, reduced cooling performance, or unusual noises coming from the back of the unit, it may indicate a need to replace the condenser fan and housing.

Symptoms of a bad condenser fan and housing include:

• Excessive heat inside the refrigerator
• Reduced cooling efficiency
• Unusual noises, such as grinding or squealing sounds

Restore your refrigerator by replacing the faulty condenser fan and housing with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement clamp secures lines or components inside the refrigerator, keeping them properly routed and stable. Replacing a broken or missing clamp helps reduce vibration and prevents rubbing damage or leaks from loose tubing. What it does:

• Holds tubing or wiring harnesses securely in place inside the refrigerator
• Maintains correct routing and clearance to prevent chafing and wear
• Helps reduce vibration and rattling noises from unsecured lines
• Can help prevent drips or leaks when used to retain water tubing

• 1 clamp

• Unplug the refrigerator and, if working with water lines, shut off the water supply
• Note the original clamp orientation and routing; take a photo before removal
• Install the new clamp in the same location, securing lines without pinching or over-stressing them
• Restore power (and water if applicable) and check that lines are secure; inspect for leaks if used on water tubing

This freezer door gasket forms an airtight seal between the door and cabinet to keep cold air in and moisture out. Replace it when the original is torn, warped, or leaking to restore proper temperature and defrost performance.

• Creates a continuous seal around the freezer door to prevent air leaks
• Helps maintain set temperatures and reduces frost/condensation buildup
• Replaces a gasket that is cracked, torn, deformed, or no longer sealing
• Common symptoms: frost or moisture along the door edge, door not closing fully, warm spots near the gasket

• Disconnect power before servicing
• Let the new gasket warm up (room temperature or brief warm-water soak) to increase flexibility
• Seat the gasket fully in the retainer/channel; use low heat (hair dryer) to relax waves—do not overheat
• Check the seal with a paper/dollar-bill test around the perimeter and adjust alignment if needed

This factory screw secures brackets, panels, and internal components so assemblies stay tight and aligned. Replace a missing or damaged fastener to eliminate rattles, looseness, and misaligned parts. What it does:

• Fastens components, panels, hinges, or brackets to the appliance frame
• Helps maintain proper alignment and a solid, rattle-free fit
• Replaces stripped, rusted, or missing hardware
• Can address vibration noises and loose assemblies

• Includes 1 screw

• Unplug the appliance and shut off water before servicing
• Wear gloves; sheet-metal edges can be sharp
• Start threads by hand to avoid cross-threading; use the appropriate driver
• Tighten snugly—do not overtighten to prevent stripping

This ice maker fill cup directs water from the refrigerator fill tube into the ice maker mold so each cycle fills correctly. Replacing a damaged cup restores consistent ice production and helps prevent water spills. What it does:

• Channels water from the fill tube into the ice maker mold for proper tray filling.
• Prevents water from dripping into the freezer compartment when intact.
• A cracked, warped, or missing fill cup can cause underfilled ice cubes, overflowing molds, or water pooling in the freezer.
• Compatible with common top/front-mounted household ice makers that use a separate plastic fill cup.

• Disconnect power and shut off the water supply before starting work.
• Remove the ice bin or ice maker assembly as needed to access the fill cup.
• The cup typically snaps or slides into place; use gentle pressure and avoid forcing plastic tabs.

This center hinge pin is the pivot shaft for the door at the middle hinge on select refrigerators. Replacing a worn or bent pin restores proper door alignment and smooth movement to help the door close and seal correctly.

• Serves as the door's pivot on the center hinge
• Maintains correct door height and alignment
• Helps the door open and close smoothly without binding
• Common symptoms: door sagging or rubbing, squeaking, wobbling, or not closing fully/popping open

• Unplug the refrigerator and remove items from the door to reduce weight
• Support the door before removing the center hinge bracket fasteners
• Install the new pin on the center hinge; reuse original spacers/bushings in their original order
• Reassemble, then check door alignment and gasket contact; adjust the hinge as needed per your model

This center hinge supports and pivots the refrigerator door at the middle of the cabinet. Replacing a bent or worn hinge restores smooth door movement and a reliable seal to help maintain proper temperatures.

• Supports door weight and provides the center pivot for opening and closing
• Helps maintain door alignment for even gasket contact
• Wear or damage can cause sagging, rubbing, squeaks, or doors that won't close/seal
• Visible bending, looseness, or a damaged hinge bracket/pin indicates replacement is needed

• Disconnect power and remove items from the door to reduce weight
• Support the door and have a second person assist; note the order of any spacers/washers
• Remove mounting screws, replace the hinge, and reinstall while keeping the door square
• Verify the door swings freely and the gasket seals evenly; adjust alignment as needed

This leveling leg supports and stabilizes the refrigerator cabinet. Adjusting it keeps the unit level so doors align and seal correctly, helping reduce vibration and noise for smoother, more reliable performance.

• Threads into the base to support and level the appliance
• Allows height adjustment for proper door alignment and gasket contact
• Helps reduce rocking, vibration, and rattling noises
• Resolve issues like doors not closing fully, uneven gaps, or a wobbly cabinet

• Disconnect power and move the appliance carefully to access the leg
• Use a helper and protect flooring; tip the unit slightly and support it securely
• Unthread the old leg; hand-thread the new leg, then adjust as needed with a wrench
• Level front-to-back and side-to-side; avoid cross-threading or overtightening

This replacement gasket seals the refrigerator's fresh food compartment in Dorian Gray. It closes gaps around the door to keep cold air in and humid air out, helping stabilize temperatures and reduce condensation for reliable cooling.

• Seals the perimeter of the fresh food door to prevent warm air leaks
• Helps maintain proper temperature and humidity in the refrigerator section
• Reduces condensation or "sweating" around the door area
• Common signs it's worn: tears, cracks, warping/shrinkage, visible gaps, or the door not sealing fully

• Unplug the refrigerator and unload the door bins
• Pull the old gasket from the retainer; on some models, slightly loosen (do not remove) liner screws to release the seal
• Warm the new gasket in hot water or with low, safe heat to relax it; seat corners first, then press the gasket fully into the retainer
• Close the door to check for even contact all around; adjust as needed and allow up to 24 hours for the gasket to conform

The Vegetable Pan is an OEM replacement part for GE refrigerators, it is responsible for keeping produce fresh and organized. It is designed to maintain the ideal humidity and temperature levels needed to extend the shelf life of your fruits and vegetables. The clear design allows for easy visibility and accessibility, making it easy to locate and retrieve your produce.

A bad vegetable pan can occur due to damage or wear and tear over time. If you notice symptoms such as cracks, broken parts, or improper humidity control, it may indicate a need to replace the vegetable pan.

Symptoms of a bad vegetable pan include:

• Cracks or broken parts
• Improper humidity control
• Premature wilting or spoiling of produce

Restore your refrigerator's storage capabilities and keep your fruits and vegetables fresh for longer by replacing the faulty vegetable pan with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This reversible door plug is a small trim cap that fills the unused holes on a refrigerator door after changing the door swing. It restores a clean, finished look and helps keep dust and moisture out.

• Covers unused hinge/handle screw holes created during a door reversal
• Press-fit cap designed to match lighter gray door trim
• Helps maintain appearance and reduce entry of dirt and moisture
• Replace if missing, cracked, discolored, or won't stay seated

• Disconnect power if removing or repositioning the door/hinges
• Use your model's parts diagram to confirm the plug location and color
• Align with the hole and press in by hand until flush with the surface
• Do not force; verify correct part if the plug will not seat properly

The Modular Door Bin is an OEM part for GE refrigerators. Ideal for organizing smaller grocery items, this versatile storage component installs inside fresh food doors. 

Symptoms of a failing door bin include:

• Cracked or broken plastic unable to securely hold contents  
• Compromised sealing allows spills inside the refrigerator 
• Detaching from mounting brackets during opening/closing

Causes relate to material fatigue from repeated door movements over the years. Exposure to sharp items inside may also damage sealing surfaces.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models. 

The Fresh Food Glass Shelf is an OEM part for GE refrigerators. It provides an adjustable glass shelf area inside the fresh food compartment for organizing food items in an open layout. The glass measures approximately 22 inches.

Causes of a bad shelf can include chips or cracks developing from repeated impact or stress from heavy loads over time. Improper cleaning leading to scratches or dulling of the glass surface is also possible.

Symptoms of a bad Fresh Food Glass Shelf  include: 

• Visible cracks or chips in the glass that compromise structural integrity
• Dull, scratched, or filmy glass that inhibits the visibility of food contents  
• Failure to slide smoothly or stay locked into position on shelf supports

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.